Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 42 for “"The supporting structure"”.
-
Design of cladding to mitigate blast effects on the supporting structure
The main aim of this doctoral thesis is to gain insight into the role of building cladding to mitigate blast effects on the supporting structure. This can be achieved by utilizing two different mechanisms, i.e., the mechanism of inertial resistance and the mechanism of plastic energy absorption, …
-
Seismic Response of Acceleration-sensitive Nonstructural Components Mounted on Moment-resisting Frame Structures
A statistical analysis of the peak acceleration demands for nonstructural components (NSCs) supported on elastic and inelastic regular moment-resisting frame structures is presented. The response of a variety of stiff and flexible frame structures (with 3, 6, 9, 12, 15, and 18 stories) subjected to …
-
Experimental and Finite Element Analysis of Wind Induced Displacement of a Dual Axis Photovoltaic Solar Trackers
… (PV) solar panels and trackers represent one of the most common renewable energy technology which converts sunlight radiation into electrical energy. The solar trackers specifically are more complex structures because they involve mechanical devices, a supporting slender structure, and …
-
AN EVALUATION OF FLOOR RESPONSE SPECTRA FOR ACCELERATION-SENSITIVE NONSTRUCTURAL COMPONENTS SUPPORTED ON REGULAR FRAME STRUCTURES
This study evaluates the acceleration response of elastic nonstructural components (NSCs) subjected to earthquake-induced supporting structure motions. The objective is to provide insight into the development of the floor response spectrum (FRS) and its dependence on critical ground motion and …
-
Vibrations analysis of vertical axis wind turbine : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics, School of Engineering and Advanced Technology, Massey University, New Zealand
This is a thesis concerned with Vertical Axis Wind Turbines (VAWT) and researches in Vibration. The Vertical axis wind turbines (VAWT) compared with Horizontal axis wind turbines (HAWT) has a lower efficiency. However, the supporting structure of VAWT structure is relatively simple. It is suitable …
-
Horizontal Stiffness of Wood Diaphragms
… investigation was conducted to study the stiffness of wood diaphragms. Currently there is no method to calculate wood diaphragm stiffness that can reliably account for all of the various framing configurations. Diaphragm stiffness is important in the design of wood framed structures to …
-
Novel symmetric and asymmetric plasmonic nanostructures
Metal-dielectric nanostructures capable of supporting electromagnetic resonances at optical frequencies are the vital component of the emerging technology called plasmonics. Plasmon is the electromagnetic wave confined at the metal-dielectric interface, which may effectively couple to the external …
-
The design, construction, and performance of a balloon-borne gamma-ray telescope
This thesis describes a new balloon-borne system which was designed, constructed, and flown with the purpose of increasing the sensitivity of gamma-ray observations. In an attempt to reduce the background counting rate, the detector employed a previously-untried composite shield of the following …
-
Direct Method of Generating Floor Response Spectra
Floor Response Spectra (FRS), also called In-structure Response Spectra (IRS) in some standards and literature, are extensively used as seismic input in safety assessment for Systems, Structures, and Components (SSCs) in nuclear power plants. Efficient and accurate determination of FRS is crucial …
-
Design Methodology for Composite Structures Consisting of Reinforced Hollow Brick Walls and Concrete Beams Connected at a Joint With Flashing and Subject to In-Plane Bending
… a flashing joint is generally used at the base of a brick wall to facilitate transport of moisture from the back of a brick wall to the outside of the building. The flashing results in a loss of bond and reduced friction between the reinforced brick wall and the supporting structure. …
-
Euglenoid flagellar root systems : ultrastructure and phylogenetic significanc
<p>The ultrastructure and arrangement of flagellar root systems have become increasingly important indicators of phylogenetic relatedness among the algae. In this ultrastructural study, the flagellar roots of two euglenoid organisms, Entosiphon sulcatum and Eutreptia pertyi, are examined in detail …
-
A study of a stiffened suspension roof structure
A stiffened suspension roof structure is studied under certain prototypical conditions. The geometry and nature of the structure is of a character that has not yet been built. The nonlinear response of the structure to load is analyzed by a three-dimensional elastic frame computer program. This …
-
Making the first global trade route: the southeast Asian foundations of the Acapulco-Manila galleon trade, 1519-1650
This study examines the means by which the Acapulco-Manila galleon trade was established and maintained in the sixteenth and seventeenth centuries. Conducting annual voyages between the ports of Acapulco in New Spain and Manila in the Philippines required a tremendous amount of supporting …
-
Analysis of the Self-heating Effect on Unfilled Poly(Methyl Methacrylate) Due to Cyclic Behavior
… (PMMA) has been implemented as part of the supporting structure in complete hip and knee replacements since the 1950s. Known as bone cement while in the body, PMMA is known to undergo compressive and tensile stresses that wear down the bio-compatible barrier and cause pieces to come …
-
A study of mirrors for an Aerogel Ring Imaging Cherenkov detector
In this thesis, I present a study of the mirror system for the Aerogel Ring Imaging Cherenkov device (ARICH). The ARICH will be installed in the Experiment to Measure the Production of Hadrons At a Testbeam in Chicagoland (EMPHATIC) whose goal is to measure hadron scattering and production cross …
-
Analysis of electric field on surface of an atomically sharp field emitter
<p>In this thesis, exact calculation and computer simulation of an atomically sharp emitter are presented. In the theoretical analysis, the cathode-anode or cathode-gate complex is modeled for cone- and wedge-shaped emitters so that exact solution can be obtained. The exact solution reveals that …
-
Application of an Extended Inverse Method for the Determination of Ice-induced Loads on Ships
With the opening of more Arctic shipping routes, the motivation to design safe and efficient ice-going ships has increased. Recently, knowledge of ship-ice interactions and the mechanics of icebreaking processes has improved through numerous fullscale studies; however, the understanding of precise …
-
Integrated Layout Design of Multi-component Systems
… layout optimization method is proposed here for the design of multi-component systems. By introducing movable components into the design domain, the components layout and the supporting structural topology are optimized simultaneously. The developed design procedure mainly consists of three …
-
Dynamics of CANDU fuel bundles
One of the most important parts of a nuclear reactor is the fuel bundle in which the nuclear reaction takes place and heat is generated. The heat is transported through the flow of the coolant to the steam generator. During such process, the fuel bundles are subjected to severe operation …
Page 1 of 3