Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 219 for “"Thermal Cycles"”.

  1. The Effects of Weld Thermal Cycles on Additively Manufactured 316L Stainless Steel

    … strength temperature (NST) test with a physical thermal mechanical simulator, Gleeble. In this study, the print orientations (Zdirection and XY-direction) and the laser patterns (stripe and checker board) are studied. In NST test, the orientation showed a statistical significance in NST: …

    calpoly Repository record for The Effects of Weld Thermal Cycles on Additively Manufactured 316L Stainless Steel (opens in a new tab)

  2. An investigation of space-time increment size on numerically calculated weld thermal cycles

    … heat flow model for calculating the thermal history of welds is investigated in this thesis. The cooling time between 800°C and 500°C (Δτ800-500) and the cooling rate at 704°C (R704°C) parameters are used to describe the thermal cycle. Experimental cooling times (Δτ800-500) and …

    carleton Repository record for An investigation of space-time increment size on numerically calculated weld thermal cycles (opens in a new tab)

  3. Moisture Uptake and Loss of Geosynthetic Clay Liners from a Silty Sand Subgrade Under Isothermal Hydration and Thermal Cycles

    … or loss of GCLs when subjected to simulated thermal cycles are examined for GCLs that were deconstructed by cutting of the needle-punched fibres to allow each component to be studied in isolation. The findings from column hydration tests performed on GCLs placed on a silty sand subgrade of …

    queens Repository record for Moisture Uptake and Loss of Geosynthetic Clay Liners from a Silty Sand Subgrade Under Isothermal Hydration and Thermal Cycles (opens in a new tab)

  4. The sensitization behavior of cast stainless steels subjected to weld repair

    … sensitization damage due to weld repair thermal cycles. The major variables in the study include carbon content, ferrite number, molybdenum content (inherent in the choice of casting types) and heat treatment including simulated weld repair thermal cycles.</p> <p>Two new electrochemical …

    ut-knoxville Repository record for The sensitization behavior of cast stainless steels subjected to weld repair (opens in a new tab)

  5. Metallic Encapsulation for High Temperature (>500 °C) Thermal Energy Storage Applications

    Deployment of high temperature (>500 °C) thermal energy storage in solar power plants will make solar power more cost competitive and pave the way towards a sustainable future. In this research, a unique metallic encapsulation has been presented for thermal energy storage at high temperatures, …

    usf Repository record for Metallic Encapsulation for High Temperature (>500 °C) Thermal Energy Storage Applications (opens in a new tab)

  6. Investigation of Heterogeneity of FSW Inconel 718 Coupled with Welding Thermal Cycle

    … of the property, microstructure evolution and thermal history of FSW Inconel 718's, the strain, strain rate and thermal cycles need to be determined. In order to estimate the strain field of a deformed body, a displacement function needs to be determined. A 3D deformation model was developed to …

    byu Repository record for Investigation of Heterogeneity of FSW Inconel 718 Coupled with Welding Thermal Cycle (opens in a new tab) Download PDF for Investigation of Heterogeneity of FSW Inconel 718 Coupled with Welding Thermal Cycle (opens in a new tab)

  7. Thermo-Mechanical Structural Response of Profiled Metal-Faced Insulating Sandwich Panels

    … incorporate the effects of high temperatures, thermal cycles, and lateral loading with a particular emphasis on their local buckling (wrinkling) behaviour. In the first phase of the thesis, the effects of sustained high temperatures and thermal cycles on the mechanical properties of expanded …

    unsw Repository record for Thermo-Mechanical Structural Response of Profiled Metal-Faced Insulating Sandwich Panels (opens in a new tab)

  8. Impact of Thermal Cycling on Carbon Fiber Reinforced Glass Epoxy Laminates

    … of the material. This is explained by the uneven thermal expansion of the different components in the composite (blade) material. Due to the micro-cracking in the composite material it leads to deterioration of the material which further leads to failure. There is a need to investigate the effects …

    houston Repository record for Impact of Thermal Cycling on Carbon Fiber Reinforced Glass Epoxy Laminates (opens in a new tab)

  9. Characteristics of thermally-induced transverse cracks in graphite-epoxy composite laminates

    The characteristics of thermally-induced transverse cracks in T300/5208 graphite-epoxy cross-ply and quasi-isotropic laminates were investigated both experimentally and analytically. The formation of transverse cracks and the subsequent crack spacing present during cooldown to -250°F (116K) and …

    vt Repository record for Characteristics of thermally-induced transverse cracks in graphite-epoxy composite laminates (opens in a new tab)

  10. Geomaterials subjected to repetitive loading: implications on energy systems

    … of these systems is that they impose numerous cycles of effective stress, temperature, and humidity on the surrounding geomaterials. This thesis quantifies future energy consumption based on realizable scenarios and explores the behavior of geomaterials subjected to mechanical and thermal …

    gatech Repository record for Geomaterials subjected to repetitive loading: implications on energy systems (opens in a new tab)

  11. Thermal Energy Storage Using Phase Change Materials and their Composites

    Commercial thermal energy storage (TES) systems require consistent thermal performance over their operational lifespan. However, thermal cycling of phase change materials (PCMs) in TES composites results in volume changes that disrupt thermal contacts among the fillers, such as expanded graphite …

    tamu Repository record for Thermal Energy Storage Using Phase Change Materials and their Composites (opens in a new tab)

  12. Análise da produção de scaffolds porosos por impressão 3D

    … maintained good rheological properties after the thermal cycles. The PLA was mixed with the expanding agent azodicarbonamide (AZDN) in a twin-screw extruder, and plasticized in a singlescrew extruder, obtaining PLA filaments with inert AZDN, for subsequent printing of porous scaffolds, in …

    brazil-ufrn Repository record for Análise da produção de scaffolds porosos por impressão 3D (opens in a new tab)

  13. External oil pipeline corrosion of near-fusion heat-affected zones simulated from high-strength steels

    … (HAZs). The HAZs were simulated by Gleeble© thermal cycles by which specific thermal conditions during pipeline welding are applied. They were applied on the high-strength steels API-X100 and API-X80. The thermal cycles were set to simulate the HAZs that are in direct adjacency to the fusion …

    ubc Repository record for External oil pipeline corrosion of near-fusion heat-affected zones simulated from high-strength steels (opens in a new tab) Download PDF for External oil pipeline corrosion of near-fusion heat-affected zones simulated from high-strength steels (opens in a new tab)

  14. Investigation of PS-PVD and EB-PVD Thermal Barrier Coatings Over Lifetime Using Synchrotron X-ray Diffraction

    … methods of cooling and material protection. Thermal barrier coatings (TBCs) achieve this through a ceramic coating applied to a substrate material (nickel-based superalloy). Electron-beam physical vapor deposition (EB-PVD) is the industry standard coating used on jet engines. By tailoring the …

    ucf Repository record for Investigation of PS-PVD and EB-PVD Thermal Barrier Coatings Over Lifetime Using Synchrotron X-ray Diffraction (opens in a new tab)

  15. Comportamento redox de transportadores de oxigênio do sistema Fe2O3/ZrO2 em ciclos térmicos para possível aplicação em CLC

    … and application in oxidation-reduction thermal cycles. The preparation of oxygen carriers was done using the incipient wetness impregnation method, with samples varying from 20%, 35% to 50%mol Fe, followed by high energy ball milling for zirconia stabilization. In some samples, almost …

    brazil-ufrn Repository record for Comportamento redox de transportadores de oxigênio do sistema Fe2O3/ZrO2 em ciclos térmicos para possível aplicação em CLC (opens in a new tab)

  16. Effects of thermal loads on Texas steel bridges

    The effects of thermal loads on steel bridges are not well understood. Although thermal effects are discussed in the AASHTO specifications, the appropriateness of the recommended thermal gradients is questionable. Thermal effects on the bridges can impact the design of the steel superstructure, the …

    texas Repository record for Effects of thermal loads on Texas steel bridges (opens in a new tab)

  17. Influence of microstructure on the shape memory properties of two Ti-lean, Ni-Ti-Pt high temperature shape memory alloys

    … (2) the relatively stable properties during thermal cycling of Pt-containing Nitinol (NiTi), and (3) the high work outputs of Ni-Ti-Pt alloys relative to other HTSMAs. Platinum containing samples of NiTi were thermally processed to explore the utility of Ti-lean precipitates for matrix …

    colo-mines Repository record for Influence of microstructure on the shape memory properties of two Ti-lean, Ni-Ti-Pt high temperature shape memory alloys (opens in a new tab)

Page 1 of 11