Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 165 for “"Thermal Spray"”.
-
A peel adhesion test for thermal spray coatings
In order for the thermal spray industry to progress, informative and reliable coating evaluation techniques are needed. The measurement of adhesion is an important problem and existing tests have severe limitations. A peel adhesion test has been adapted to thermal spray coatings from the adhesives …
-
Thermal Spray Coating Characterization via Higher Dimensional Surfaces
Thermal spray coatings are microscale coatings used to improve the surface properties of surfaces they are applied to. Statistical quantification can improve understanding of a thermal coating's microstructure; however, doing so in an automatic and autonomous manner from image data is non-trivial. …
-
Thermal spray cladding optimization for steel drill pipe
Thermal spraying is commonly used to apply a hard and wear resistant coating to the outside of drill pipe. These coatings, however, are susceptible to impact damage and brittle fracture. A fundamental understanding is needed for the relationship among wire composition, spray parameters, and …
-
Splat-substrate interactions in high velocity thermal spray coatings
Thermal spray coatings applied with high velocity techniques produce dense, industrial quality coatings with strong adhesion and minimal decomposition. This thesis reports on investigations of splat-substrate interactions for both solid and molten splats. Specifically, individual particles were …
-
Fabrication of Thermal Management Devices using Thermal Spray Technology
Thermal spray coating processes have been employed to create a composite finned heat sink and a flat vapor chamber featuring structured porous coating wicks, for thermal management application. Three composite heat sinks in the shape of a disk, a cylinder, and a cylinder with vertically projecting …
-
Repair/strengthening of steel angles using thermal spray metallizing
… many studies have been conducted on the use of thermal spray metallizing coatings on metallic substrates. This technique is widely used for corrosion and wearing protection. In this research program, the effectiveness of the thermal spray metallizing technique was examined as a means of …
-
Microstructural analysis of thermal spray coatings by electron microscopy
Plasma and High Velocity Oxy-Fuel (HVOF) spraying are two of the most common thermal spray processes. In both methods, heated particles are sprayed through a flame (either plasma or oxygen fuelled), before being projected at high velocity towards a substrate. Upon impact they flatten, forming …
-
Erosion-Corrosion of Cr3C2-NiCr High Velocity Thermal Spray Coatings
… mechanisms of erosion-corrosion of Cr3C2-NiCr thermal spray coatings under high temperature, high erodent velocity, turbine conditions. Erosion-corrosion is a generalised wear phenomenon where the combined effect of each degradation mechanism generates more extensive mass loss than the sum of …
-
Novel aluminium alloys for thermal spray applications to steel substrates.
… in the form of coatings deposited using thermal spraying, hot dipping and cladding. This research has investigated the performance of arc sprayed Al-5wt%Zn-(0.02-0.05wt%)ln and Al-3wt%Ti-0.15wt%C coatings to protect steel structures from corrosion and wear.The accelerated and …
-
Rare Earth Oxide Coating with Controlled Chemistry Using Thermal Spray
… its subsequent consolidation, specially using thermal spray. This dissertation aims to develop a scientific understanding towards the development of pure and doped ceria- based coating for a variety of technological applications, from SOFC applications to corrosion resistant coating. …
-
The Relationship between Microstructure and Fracture Toughness of Thermal Spray Coatings
In this work, two coatings, HVOF-sprayed Cr3C2-NiCr and plasma-sprayed HfO2-Si, were characterized and tested via micro and macroscale test methods. Comparison of two Cr3C2-NiCr coatings revealed the role of carbide dissolution in promoting the formation of brittle nanocrystalline and amorphous …
-
Development of multiphase and multiscale mathematical models for thermal spray process
High velocity oxyfuel (HVOF) thermal spraying is one of the most significant developments in the thermal spray industry since the development of the original plasma spray technique. The first investigation deals with the combustion and discrete particle models within the general purpose commercial …
-
Thermal spray of a drug delivery system onto femoral orthopaedic implant
… in chemical composition to bone. Plasma spraying has been commonly used to apply hydroxyapatite coatings onto metallic implants for use in orthopaedic surgeries. The addition of HA coatings was successful in improving the performance of titanium implants. However, this type of implant has …
-
Thermal Spray Coating Development of Inert Anode for Aluminum Electrolysis Process
… The main objective of this work is to develop a thermal spray coating of (Co,Ni)O on the Cu-Ni-Fe anodes to slow down the attack of the electrolyte and allow the formation of NiFe2O4 surface scale to occur. In this thesis, a novel approach in the preparation of thick, dense, homogenous and single …
-
Numerical Modeling of Suspension and Particle Transport in Thermal Spray Processes
… enhanced catalytic behavior, and superior thermal insulation. Suspension thermal sprays have been shown to be viable techniques in generating this kind of coatings. In these techniques, suspension which is a combination of a base liquid and fine solid particles is injected into a …
-
High velocity oxy-fuel (HVOF) thermal spray deposition of functionally graded coatings
… modification of a HVOF (High Velocity Oxy-Fuel) thermal spray process to produce functionally graded thick coatings. In order to deposit thick coatings, certain problems have to be overcome. More specifically these problems include minimizing residual stresses, which cause shape distortion in …
-
Splat-substrate interactions of Thermal Spray nickel-based coatings on alumina substrates
Atmospheric plasma arc spray deposition (APS) is a commonly used method of thermal spraying. Deposition typically occurs at high temperatures, generated by the plasma arc, which is necessary to spray materials with high melting points. Such processes are typically used to prepare protective surface …
-
SPH simulation of YSZ and stainless-steel droplet impact for thermal spray process
… refinishing or rebuilding the damaged surfaces. Thermal spray is one of the popular coating technologies. The thermal spray process involves the heated coating materials (e.g., ceramics, metal alloys, and metallic) being propelled onto the substrate as molten or semi-molten droplets to form a …
-
Particle-based approach to model fuel droplet impact and thermal spray coating processes
… interactions encompassing two disciplines: fuel spray dynamics and thermal spray coating. The first part is about the consecutive drop-wall interactions at different impingement frequencies at a wide range of wall temperatures and ambient pressure conditions. The second part is centered around …
-
Thermofluid Simulation of Thermal Spray Processes: Aeroacoustic Modeling and Graph Neural Network Acceleration
Thermal spray processes involve complex interactions among compressible jet expansion, shock-cell structure, turbulent mixing, aeroacoustic emission, and in-flight particle transport, all of which influence process stability and coating quality. This thesis addresses these challenges through two …
Page 1 of 9