Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 142 for “"Thermal cycle"”.

  1. Thermal Cycle Effects on Laminated Composite Plates Containing Voids

    … of voids on the micro-crack formation, under thermal cycles and environmental conditions, were investigated and analyzed. Thermal cycle experiments were performed using liquid nitrogen and oven followed by microscopic observation of the polished cross-section of the 900 layered plies. Cracks …

    concordia Download PDF for Thermal Cycle Effects on Laminated Composite Plates Containing Voids (opens in a new tab)

  2. Effects of the weld thermal cycle on the microstructure of alloy 690.

    … alloy 690 in both mill annealed (MA) and special thermally treated (STT) condition has shown a high degree of resistance to degradation in simulated PWR primary side environments and other test media.Limited research has previously been undertaken to investigate the effects of welding on alloy …

    sheffield-hallam Download PDF for Effects of the weld thermal cycle on the microstructure of alloy 690. (opens in a new tab)

  3. Investigation of Heterogeneity of FSW Inconel 718 Coupled with Welding Thermal Cycle

    … of the property, microstructure evolution and thermal history of FSW Inconel 718's, the strain, strain rate and thermal cycles need to be determined. In order to estimate the strain field of a deformed body, a displacement function needs to be determined. A 3D deformation model was developed to …

    byu Repository record for Investigation of Heterogeneity of FSW Inconel 718 Coupled with Welding Thermal Cycle (opens in a new tab) Download PDF for Investigation of Heterogeneity of FSW Inconel 718 Coupled with Welding Thermal Cycle (opens in a new tab)

  4. Effects of a combined supercritical extraction/thermal cycle on binder removal cycle time, yield, residual carbon, and defect formation in multilayer ceramic capacitors

    In this work, a combined cycle consisting of a supercritical extraction cycle (SCE) followed by a thermal cycle (TC), was used to remove binder from green multilayer ceramic capacitors. The dielectric was barium titanate and the binder consisted of poly(vinyl butyral) plasticized with phthalates. …

    missouri Repository record for Effects of a combined supercritical extraction/thermal cycle on binder removal cycle time, yield, residual carbon, and defect formation in multilayer ceramic capacitors (opens in a new tab)

  5. Characterization of microstructure and mechanical behaviour of heat affected zones in robotic arc welding of AA6061-T6

    … heat treatment. The variation of the welding thermal cycle across the HAZ produces different mechanical properties in subzones of the HAZ. The purpose of this investigation is to investigate the variation of the microstructure and mechanical behaviour in the HAZ subzones and correlate these …

    ets-quebec Download PDF for Characterization of microstructure and mechanical behaviour of heat affected zones in robotic arc welding of AA6061-T6 (opens in a new tab)

  6. Βελτιστοποίηση διεργασιών μορφοποίησης θερμοπλαστικών σύνθετων υλικών

    … relies on the consideration of the processes thermal cycle as essential for both the quality and cost of the produced part. It involves a quality sensitivity analysis based on experimental data, which relates the values of the thermal cycle parameters to predefined quality characteristics …

    greece Repository record for Βελτιστοποίηση διεργασιών μορφοποίησης θερμοπλαστικών σύνθετων υλικών (opens in a new tab)

  7. Active Brazing of Single Crystal Al2O3 to Kovar Alloy with AgCuZr Filler Metal

    … to select five quench points in the prescribed thermal cycle ramp. Each quenched sample underwent postmortem microscopy and spectroscopy analysis, making it possible to track microstructure evolution across the thermal cycle. In situ monitoring provided new insight into the reactions that occur …

    unm Repository record for Active Brazing of Single Crystal Al2O3 to Kovar Alloy with AgCuZr Filler Metal (opens in a new tab)

  8. The Effects of Weld Thermal Cycles on Additively Manufactured 316L Stainless Steel

    … strength temperature (NST) test with a physical thermal mechanical simulator, Gleeble. In this study, the print orientations (Zdirection and XY-direction) and the laser patterns (stripe and checker board) are studied. In NST test, the orientation showed a statistical significance in NST: …

    calpoly Repository record for The Effects of Weld Thermal Cycles on Additively Manufactured 316L Stainless Steel (opens in a new tab)

  9. Stress Intensity Solutions of Thermally Induced Cracks in a Combustor Liner Hot Spot Using Finite Element Analysis

    Thermally cycling a thin plate of nickel-based superalloy with an intense in-plane thermal gradient, or hot spot, produces thermally induced crack growth not represented by classic thermo-mechanical fatigue (TMF). With the max hot spot temperature at 1093 C (2000 F) of a 1.5 mm thick, 82.55 mm …

    gatech Repository record for Stress Intensity Solutions of Thermally Induced Cracks in a Combustor Liner Hot Spot Using Finite Element Analysis (opens in a new tab)

  10. An efficient heat engine for ocean thermal energy conversion

    Carbon-dioxide-absorptive ocean thermal energy conversion (OTEC) holds the promise to provide 2-3 orders of magnitude more energy than current world consumption from fossil fuels, nuclear, hydroelectric, and all other alternative energy sources combined. However, the ten-fold capital costs of ocean …

    umkc Repository record for An efficient heat engine for ocean thermal energy conversion (opens in a new tab)

  11. Reliability Analysis of Dual-Purpose (Power and Water) Production Station, Volume I

    … reliability engineering analysis techniques to a thermal dual-purpose (power&water) production station. The thermal cycle of the station is a fossil fueled steam boiler, condensing-extraction steam turbine, a generator, and a multi-stage flash evaporator.

    glasgow Download PDF for Reliability Analysis of Dual-Purpose (Power and Water) Production Station, Volume I (opens in a new tab)

  12. Air-sea interactions and water mass structure of the East China Sea and Yellow Sea

    … of the ECS, YS and CB undergoes a seasonal thermal cycle with maximum values of temperature during summer and maximum mixed layer depths during winter. Only the surface waters of TWC and KC exhibit a seasonal thermal cycle. Two patterns exist in the surface salinity and Yangtze River …

    nps Repository record for Air-sea interactions and water mass structure of the East China Sea and Yellow Sea (opens in a new tab)

  13. Effects of Thermo-mechanical Loading From In-situ Studies of EB-PVD Thermal Barrier Coatings

    … effects on the strain evolution within an EB-PVD thermal barrier coating (TBC) is presented in this work using in-situ characterization. Synchrotron X-ray diffraction at sector 1-ID at the Argonne National Laboratory provided both qualitative and quantitative in-situ data on the strain evolution …

    ucf Repository record for Effects of Thermo-mechanical Loading From In-situ Studies of EB-PVD Thermal Barrier Coatings (opens in a new tab)

  14. Processing and Shape-Setting of Shape Memory Alloys for Small Satellite Antennas

    … curvature. After shape-setting, the wire was thermally cycled multiple times. The results showed that the SE NiTi 508 wire was able to retain its deployment shape successfully after each thermal cycle. Furthermore, a NiTiCu plate was sandwiched between two steel sheets which were shaped into …

    unt Repository record for Processing and Shape-Setting of Shape Memory Alloys for Small Satellite Antennas (opens in a new tab)

  15. Pavojingų atliekų utilizavimo metodų kūrimas ir tyrimas /

    … waste incineration, hazardous waste down the thermal value of the thermal cycle test losses, the heating oils consumption figures through the pilot incineration plant start-up periods. The paper provides general information about the hazardous waste classification, treatment methods, the …

    vilnius Repository record for Pavojingų atliekų utilizavimo metodų kūrimas ir tyrimas / (opens in a new tab)

  16. Transient thermal stress analysis of composite structures including continuously varying properties

    Calculations of transient thermal stress levels were made for composite coatings of hollow cylinders. Stress analysis was done during a thermal cycle of successive heating and cooling periods. Various coating configurations were investigated. The results showed the effect of changes in coating …

    nps Repository record for Transient thermal stress analysis of composite structures including continuously varying properties (opens in a new tab)

  17. Microstructure-property development in linear friction welding of nickel-based superalloys

    … microhardness development; influence of rapid thermal cycle on the precipitate dissolution of IN718 and IN713LC; formation mechanisms of alumina inclusions (Al-oxides) on the weld interface. The present work aims to investigate these issues.

    birmingham Download PDF for Microstructure-property development in linear friction welding of nickel-based superalloys (opens in a new tab)

  18. The effects of thermal cycling on residual stresses in thick- walled stainless steel pipe

    The effects of thermal cycling on residual stresses are studied in thick-walled 316L stainless steel pipe. A relatively small AT of 280°F is considered. The residual stresses are measured by an x-ray diffraction technique. The initial stress state of the pipe wall shows periodic and random …

    vt Repository record for The effects of thermal cycling on residual stresses in thick- walled stainless steel pipe (opens in a new tab)

Page 1 of 8