Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 51 for “"Thermal testing"”.

  1. Flexural and thermal testing of composite prestressed sandwich panels

    … of sandwich panels subjected to flexural and thermal loads. More specifically, to determine how various parameters affect the amount of composite action exhibited by sandwich panels. Full-scale prestressed concrete sandwich panels were used to examine the bond between the concrete wythes and …

    iastate Repository record for Flexural and thermal testing of composite prestressed sandwich panels (opens in a new tab)

  2. A thermal testing facility for the Aeronautics Department at USNPS

    An engineering study was conducted of a testing facility for the Aeronautics Department at USNPS designed to test for thermal effects on aircraft Structures. Types of equipment and testing methods are described. A recommended facility employing radiant quartz tube lamps as a heat source and …

    nps Repository record for A thermal testing facility for the Aeronautics Department at USNPS (opens in a new tab)

  3. Investigation of protective mechanisms of organic coatings by thermal testing and electrochemical techniques

    <p>This work investigated the protection of mechanism of organic coatings on steel exposed to 3% sodium chloride solution at 50°C, coupled with the use of electrochemical impedance spectroscopy (EIS) to monitor progress of corrosion and degradation of coating. Unlike Walter, EIS measurement was …

    oxford Repository record for Investigation of protective mechanisms of organic coatings by thermal testing and electrochemical techniques (opens in a new tab)

  4. Design and Validation of an LED-Based Solar Simulator for Solar Cell and Thermal Testing

    … students to evaluate solar cell and thermal coating performance, and offers further research opportunities. The requirements of ASTM E927-19 for solar simulators intended for photovoltaic cell testing were used primarily, supplemented by information from ASTM E491-73 for solar …

    calpoly Repository record for Design and Validation of an LED-Based Solar Simulator for Solar Cell and Thermal Testing (opens in a new tab)

  5. Modeling of thermal conductivity and pressure drop, and thermal/mechanical testing of carbon foam-based materials

    … into three parts: (1) modeling of overall thermal conductivity, (2) modeling of pressure drop, and (3) mechanical and thermal testing of the light-weight, high-thermal conductivity carbon foam and carbon foambased composites that were recently developed at the Oak Ridge National Laboratory. …

    ut-knoxville Repository record for Modeling of thermal conductivity and pressure drop, and thermal/mechanical testing of carbon foam-based materials (opens in a new tab)

  6. Desenvolvimento de um biocompósito polimérico reforçado com lã canina

    … and 2.8 cm in diameter and 3.9 cm in height for thermal testing. The crushed fibers (reinforcement) were mixed with polyester resin in proportions of 2%, 4% and 8%. The samples were evaluated according to the current standards for flexure, water absorption, SEM and thermal testing. The …

    brazil-ufrn Repository record for Desenvolvimento de um biocompósito polimérico reforçado com lã canina (opens in a new tab)

  7. IN SITU STEM STUDY OF METAL OXIDES NANOWIRES FOR NANOELECTRONICS AND ENERGY STORAGE SYSTEMS

    … tilt liquid nitrogen-cooling holder was used for thermal testing and scanning tunneling microscopy (STM) stage holder was used to perform electrical testing on individual nanowires.

    mtu Repository record for IN SITU STEM STUDY OF METAL OXIDES NANOWIRES FOR NANOELECTRONICS AND ENERGY STORAGE SYSTEMS (opens in a new tab)

  8. The compressive behavior of glass fiber reinforced composites subjected to local thermal lodging

    … been conducted to determine the effects of local thermal loading on the compressive behavior of glass fiber composites. The primary factors considered were the intensity of thermal loading and the applied compressive load. The material specimens tested were laminate plates composed of Micarta 010 …

    nps Repository record for The compressive behavior of glass fiber reinforced composites subjected to local thermal lodging (opens in a new tab)

  9. Active Thermal Management of Electronic Devices Using Fractal Extended Surfaces

    In the present work, the active thermal management of electronic devices using fractal extended surfaces is experimentally investigated. The thermal performance of extended surfaces inspired by the first four fractal iterations of the Sierpinski carpet fractal pattern in a forced convection …

    gsu Repository record for Active Thermal Management of Electronic Devices Using Fractal Extended Surfaces (opens in a new tab)

  10. PARTICLE IMAGE VELOCIMETRY METHODOLOGY FOR CALCULATING THE ADVECTIVE LOSSES AT THE SOLAR TOWER FOR THE GEN 3 CONCENTRATED SOLAR POWER SYSTEM

    … National Laboratory (SNL) at the National Solar Thermal Testing Facilities (NSTTF) is one of the latest concentrated energy harvesting systems for Concentrated Solar Power (CSP). The FPR system at the NSTTF uses solid particles as both the heat transfer fluid and storage media. This FPR operates …

    unm Repository record for PARTICLE IMAGE VELOCIMETRY METHODOLOGY FOR CALCULATING THE ADVECTIVE LOSSES AT THE SOLAR TOWER FOR THE GEN 3 CONCENTRATED SOLAR POWER SYSTEM (opens in a new tab)

  11. Multi-Layer Aperiodic Dielectric Stack Structures for High Performance Electromagnetic Spectral Shaping from mm-Wave to mid-IR Frequencies

    … second focused on the design, fabrication, and thermal testing of a 7-layer aperiodic thermal emitter consisting of alternating layers of silicon and silicon dioxide and backed by a metallic ground plane. An emittance of 0.7 and Q-factor of 113 is achieved at 70°C. Superior performance of …

    carleton Repository record for Multi-Layer Aperiodic Dielectric Stack Structures for High Performance Electromagnetic Spectral Shaping from mm-Wave to mid-IR Frequencies (opens in a new tab)

  12. CONCEPT OF OPERATIONS AND FUNCTIONAL TESTING OF TERAHERTZ IMAGING CAMERA 2.1

    … objectives; and to design and conduct functional testing of the TIC 2.1 payload. Methods include analytical modeling of orbital geometry and sensor performance, development of reference tables to optimize image overlap and swath length, and laboratory-based environmental and functional testing of …

    nps Repository record for CONCEPT OF OPERATIONS AND FUNCTIONAL TESTING OF TERAHERTZ IMAGING CAMERA 2.1 (opens in a new tab)

  13. Development of a pouch format thermal dummy cell to aid lithium-ion battery thermal management system development

    … faster charging, and tighter packaging, battery thermal management systems (BTMSs) are required to have higher efficiency, better uniformity, lighter weight, and lower volume penalty. LiB cell testing poses safety concerns associated with chemical reactions, high voltage exposure, and thermal …

    hawaii Repository record for Development of a pouch format thermal dummy cell to aid lithium-ion battery thermal management system development (opens in a new tab)

  14. Developing Simulation to Improve G3P3 Efficiencies

    … falling particle receiver. At the National Solar Thermal Testing Facility (NSTTF), particles absorb and store solar energy for later power generation. A major source of efficiency loss is wind-driven particle escape through the receiver aperture. This thesis develops computational fluid dynamics …

    unm Repository record for Developing Simulation to Improve G3P3 Efficiencies (opens in a new tab)

  15. Experimental investigation of the performance of a fully cooled gas turbine vane with and without mainstream flow and experimental analysis supporting the redesign of a wind tunnel test section

    … vane. Overall effectiveness was measured using a thermally scaled matched Biot number vane with an impingement plate providing the internal cooling. This is the first study focused on investigating the effect of removing the mainstream flow and comparing the contour and laterally-averaged …

    texas Repository record for Experimental investigation of the performance of a fully cooled gas turbine vane with and without mainstream flow and experimental analysis supporting the redesign of a wind tunnel test section (opens in a new tab)

  16. High Temperature Heat Flux Measurement: Sensor Design, Calibration, and Applications

    … of a high temperature heat flux sensor for thermal systems research and testing. The High Temperature Heat Flux Sensor (HTHFS) was designed to survive in the harsh thermal environments typically encountered in hypersonic flight, combustion and propulsion research, and large-scale fire …

    vt Repository record for High Temperature Heat Flux Measurement: Sensor Design, Calibration, and Applications (opens in a new tab)

  17. Incorporação de resíduos industriais para produção massa cerâmica

    … , particle size analysis , differential thermal analysis , thermogravimetry , dilatometry and subjected to four different thermal cycles that they were : 855 °C and 955 °C at a rate heating 10 °C / min and a plateau 30 minutes to obtain structural products and other ceramic thermal cycle …

    brazil-ufrn Repository record for Incorporação de resíduos industriais para produção massa cerâmica (opens in a new tab)

  18. Thermal analysis and testing of a spaceborne passive cooler

    This thesis describes the thermal design and thermal testing of the development model radiative cooler for the Composite Infra-Red Spectrometer (CIRS) due for launch on the Cassini spacecraft in 1997. The radiative cooler is used to cool the instrument's Focal Plane Assembly (FPA) to approximately …

    oxford Repository record for Thermal analysis and testing of a spaceborne passive cooler (opens in a new tab)

  19. Towards Understanding an Imperfect Built Environment: A Methodology for In-Situ Characterization of Building Envelope Thermal Performance

    … modeling to non-intrusively characterize the thermal properties of a building's envelope to inform energy modeling, facade design, and project appraisal. This thesis presents a literature survey of the state-of-the-art in in-situ thermal testing, a thermal characterization methodology to …

    gatech Repository record for Towards Understanding an Imperfect Built Environment: A Methodology for In-Situ Characterization of Building Envelope Thermal Performance (opens in a new tab)

Page 1 of 3