Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 47 for “"Thermo-mechanical model"”.

  1. Solder Joint Reliability: A Unified Thermo-Mechanical Model Approach

    … in harsh operating environments replete with thermo-mechanical stresses. Fatigue behavior of the solder joints has been previously studied under the separate domains of microstructure evolution and non-linear plastic deformations. The proposed study captures the underlying physics of failure …

    ndsu Repository record for Solder Joint Reliability: A Unified Thermo-Mechanical Model Approach (opens in a new tab)

  2. Thermo-mechanical model of steel shell behavior in continuous slab casting

    … slabs. In order to understand the thermal and mechanical behavior of the shell, a two-dimensional transient stepwise-coupled finite-element model has been developed. The model simulates a transverse section of the slab as it moves down through the mold and below and incorporates the effects of …

    uiuc Repository record for Thermo-mechanical model of steel shell behavior in continuous slab casting (opens in a new tab)

  3. Efficient Thermo-Mechanical Model for Solidification Processes and Its Applications in Steel Continuous Casting

    The model is then improved to add coupling of heat flow and stress generation that are increment-wise coupled through the size of the interfacial gap. Coupled results are first verified with a solidifying slice, and then quantitatively against the CON2D 2D model of billet casting by fully employing …

    uiuc Repository record for Efficient Thermo-Mechanical Model for Solidification Processes and Its Applications in Steel Continuous Casting (opens in a new tab)

  4. Thermal mechanical analysis of interfacial behavior in aluminum alloy wheel casting process

    … interfacial behavior, a 2D-axisymmetric coupled thermo-mechanical model has been developed in the commercial finite element package, ABAQUS. The model was capable of predicting the thermal history, deformation and the variation of the air gap and pressure along the wheel/die interface. The …

    ubc Repository record for Thermal mechanical analysis of interfacial behavior in aluminum alloy wheel casting process (opens in a new tab) Download PDF for Thermal mechanical analysis of interfacial behavior in aluminum alloy wheel casting process (opens in a new tab)

  5. Solid oxide fuel cell reliability and performance modeling and fabrication by spray pyrolysis

    … evaluate the durability of SOFCs, a mathematical thermo-mechanical model was developed to provide the distribution of thermal stresses during thermal cycling, and predict the lifetime of a cell. In addition, an ultrasonic spray pyrolysis prototype fabrication setup, which has the ability to tailor …

    iastate Repository record for Solid oxide fuel cell reliability and performance modeling and fabrication by spray pyrolysis (opens in a new tab)

  6. Effects of plate subduction on the earth's deep water cycles

    … timing of slab fluid is studied using a chemo-thermo-mechanical model. By coupling this model to a parameterized mantle convection model the global implications of plate subduction on the geochemical water cycle of the Earth's mantle are explored.

    cau-kiel Repository record for Effects of plate subduction on the earth's deep water cycles (opens in a new tab)

  7. Shrinkage and ejection forces in injection moulded products

    … performed using the C-Mold v. 99.7 and a thermo-mechanical model originally developed at the Università di Salerno and modified within this research to suit specific aspects of the geometries being studied. This thermo-mechanical model gives a satisfactory description of the shrinkage and …

    minho-thes Repository record for Shrinkage and ejection forces in injection moulded products (opens in a new tab)

  8. An Investigation of Phase Change Material (PCM)-Based Ocean Thermal Energy Harvesting

    … from the temperature gradient in the ocean thermocline. Its basic idea is to utilize the temperature variation along the ocean water depth to cyclically freeze and melt a specific kind of PCM. The volume expansion, which happens in the melting process, is used to do useful work (e.g., drive …

    vt Repository record for An Investigation of Phase Change Material (PCM)-Based Ocean Thermal Energy Harvesting (opens in a new tab)

  9. The role of frictional heating in the development of catastrophic landslides

    In this work, a new thermo-mechanical model is developed by improving on an existing one, applicable to large deep seated landslides and rockslides consisting of a coherent mass sliding on a thin clayey layer. The considered time window is that of catastrophic acceleration, starting at incipient …

    soton Download PDF for The role of frictional heating in the development of catastrophic landslides (opens in a new tab)

  10. RFSSW Behavior Prediction Using a Numerical Model

    A two-dimensional axisymmetric thermo-mechanical model of the Refill Friction Stir Spot Welding (RFSSW) process was developed and validated with experimental data. Welding temperatures, tool forces, and material flow including defect formation, were accurately predicted by the model. Qualified …

    byu Repository record for RFSSW Behavior Prediction Using a Numerical Model (opens in a new tab) Download PDF for RFSSW Behavior Prediction Using a Numerical Model (opens in a new tab)

  11. Investigating the Controls of Ice-Wedge Initiation and Growth using XFEM

    … periglacial landforms known as ice-wedges. A 2-D thermo-mechanical model with XFEM is employed in ABAQUS to investigate the effect of environmental controls on the cracking process. Seventeen combinations of soil type and temperature-time series are used in three case studies addressing model …

    carleton Repository record for Investigating the Controls of Ice-Wedge Initiation and Growth using XFEM (opens in a new tab)

  12. Thermo- Mechanical Modeling of the Volvo Varestraint Test with the Aid of Finite Element Method

    … this master thesis was to design and validate a thermo-mechanical model (TMM), by using finite element analysis and evaluate the physics why the cracks propagate. The material of interest is a solution heat treated Ni-based superalloy named Haynes® 282®. The thesis is divided into two parts, Part …

    chalmers Repository record for Thermo- Mechanical Modeling of the Volvo Varestraint Test with the Aid of Finite Element Method (opens in a new tab)

  13. Additive manufacturing of nickel based superalloys for aerospace applications

    … MPa, but could not be eliminated. A simple 3D thermo-mechanical model was developed to understand the residual stress distribution, which agreed closely with the experimental measurements.

    birmingham Download PDF for Additive manufacturing of nickel based superalloys for aerospace applications (opens in a new tab)

  14. Finite element models for the thermo-chemo-mechanical analysis of concrete structures regarding ageing and damage

    This study will address the thermo-chemo-mechanical behaviour of concrete considering ageing and damage. To this end, mathematical models will be developed and worked out through the Finite Element Method. The analysis will be composed of two models, namely: thermo-chemical and thermo-mechanical. …

    brazil-uerj Repository record for Finite element models for the thermo-chemo-mechanical analysis of concrete structures regarding ageing and damage (opens in a new tab)

  15. Investigation of the thermoelastic effect on the satellite panels identified by an industrial problem of de-pointing

    … the prediction of coupling effects between the mechanical deformation and the thermal loading, which would guarantee high accuracy of the thermo-elastic model. The finite element approach as well as experimental tests were both unable to simulate the deformation effect within the honeycomb core, …

    strathclyde Repository record for Investigation of the thermoelastic effect on the satellite panels identified by an industrial problem of de-pointing (opens in a new tab)

  16. Design and Characterization of Scanning Probe Microscopy Platform with Active Electro-Thermal Microcantilever for Multifunctional Applications

    … uses a newly designed and fabricated electro-thermo-mechanical (ETM) cantilever with a microgripper at its distal end designed for automated pickup and release of tool tips. This unique platform will help address the critical issues of throughput, repeatability, scalability, and limited …

    unr Repository record for Design and Characterization of Scanning Probe Microscopy Platform with Active Electro-Thermal Microcantilever for Multifunctional Applications (opens in a new tab)

  17. A Coupled Thermo-mechanical Theory of Strain Gradient Plasticity for Small and Finite Deformations

    In this work, a thermodynamically consistent coupled thermo-mechanical gradient enhanced continuum plasticity theory is developed for small and finite deformations. The proposed model is conceptually based on the dislocations interaction mechanisms and thermal activation energy. The thermodynamic …

    lsu-thes Repository record for A Coupled Thermo-mechanical Theory of Strain Gradient Plasticity for Small and Finite Deformations (opens in a new tab)

  18. MEMS micro-bridge actuator for potential application in optical switching

    … using low voltage drive. Buckled shape model, design method for bi-stability and thermo-mechanical model are developed and employed in the design of the micro-bridge. These models are compared with Finite Element (FE) based ANSYS simulation and measurements from the fabricated …

    unsw Repository record for MEMS micro-bridge actuator for potential application in optical switching (opens in a new tab)

  19. Analytical modeling of shear localization in machining processes and its effects on the tool-chip interface

    … processes. This thesis proposes a new analytical thermo-mechanical model for shear localization by assuming an extended primary deformation zone and complete localization of plastic deformation inside shear bands after their formations. Unlike the classical cutting mechanics, the extended primary …

    ubc Repository record for Analytical modeling of shear localization in machining processes and its effects on the tool-chip interface (opens in a new tab) Download PDF for Analytical modeling of shear localization in machining processes and its effects on the tool-chip interface (opens in a new tab)

  20. Thermo-visco-elastic modelling of photovoltaic laminates: Advanced shear-lag theory and model order reduction techniques

    During lamination, residual thermo-mechanical stresses are induced in the encapsulated solar cells composing photovoltaic (PV) modules. Depending on the material and geometrical configuration of the layers of the laminate, this residual stress field can be beneficial since it may lead to a …

    poli-torino Repository record for Thermo-visco-elastic modelling of photovoltaic laminates: Advanced shear-lag theory and model order reduction techniques (opens in a new tab)

Page 1 of 3