Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Thermo-optic coefficient"”.

  1. Determination of thermo-optic coefficient for B2O3 and GeO2 co-doped optical silica fiber

    … understand the influence of B2O3 and GeO2 on the thermo-optic coefficient (TOC) of silica optical fiber. This is important since understanding the contributions to the TOC by these constituents can provide insight into the way to lower the positive-valued TOC of SiO2, which is a potential method …

    uiuc Repository record for Determination of thermo-optic coefficient for B2O3 and GeO2 co-doped optical silica fiber (opens in a new tab)

  2. Photothermal Lensing in Mid-Infrared Materials

    … is crucial when designing and building optical systems. An ideal test method would probe both the thermal and optical properties simultaneously for materials under large optical loads where detrimental thermal effects emerge. An interesting class of materials are those used for infrared …

    ucf Repository record for Photothermal Lensing in Mid-Infrared Materials (opens in a new tab)

  3. Designing Optical Properties in Infrared Glass

    … (ChGs) are well-known for their attractive optical properties, such as high refractive index and transparency in across infrared wavelengths. ChGs also possess the ability to compositionally tune properties such as the refractive index, the thermo-optic coefficient, and other non-optical …

    clemson Repository record for Designing Optical Properties in Infrared Glass (opens in a new tab)

  4. The Materials Science and Engineering of Advanced YB-Doped Glasses and Fibers for High-Power Lasers

    … to influence the glass’ photoelastic and thermo-optic coefficient, was performed in order to understand and realize significant decreases in Brillouin and thermal-Rayleigh scattering, which instigate parasitic stimulated Brillouin scattering (SBS) and transverse mode instabilities (TMI) in …

    clemson Repository record for The Materials Science and Engineering of Advanced YB-Doped Glasses and Fibers for High-Power Lasers (opens in a new tab)

  5. Novel Thermal Controller for Active Stabilization of Microring Modulators

    … high thermal sensitivity caused by their high thermo-optic coefficient. Control systems that actively stabilize MRM have demonstrated the ability to compensate for thermal fluctuations, but none have addressed all system requirements for large-scale commercial applications. This work presents a …

    concordia Download PDF for Novel Thermal Controller for Active Stabilization of Microring Modulators (opens in a new tab)

  6. Thermo-optic phase shifters for integrated photonics at low temperatures

    … conflicts with another essential building block, optical phase-shifters, used for routing single photons in the circuits that introduce local temperature shifts of several hundred degrees Kelvin.<br/><br/>This thesis studies the viability of the operation of thermo-optic phase shifters in …

    bristol Repository record for Thermo-optic phase shifters for integrated photonics at low temperatures (opens in a new tab) Download PDF for Thermo-optic phase shifters for integrated photonics at low temperatures (opens in a new tab)

  7. Simultaneous measurement of strain and temperature using liquid core optical fiber sensors

    … core fiber sensor is comprised of a hollow core optical fiber filled with a liquid of a known index of refraction which is slightly higher than that of the silica tube which acts as the cladding. The refractive index fluid is chosen such that the variation of its refractive index with strain and …

    vt Repository record for Simultaneous measurement of strain and temperature using liquid core optical fiber sensors (opens in a new tab)

  8. SIMULTANEOUS SENSING OF PRESSURE AND TEMPERATURE USING A SELF-TEMPERATURE-COMPENSATED FABRY–PÉROT MEMS MECHANISM

    … and a solid block that is then coupled with two optical fibers contained in a unique and simple protective stainless-steel housing. The solid block uses the thermo-optical properties of silicon for temperature measurements, while the deflection of the membrane is used for pressure sensing. An …

    waterloo Repository record for SIMULTANEOUS SENSING OF PRESSURE AND TEMPERATURE USING A SELF-TEMPERATURE-COMPENSATED FABRY–PÉROT MEMS MECHANISM (opens in a new tab)

  9. Thermo-optic Characterization of tellurium oxide thin films for nonlinear and quantum photonic applications

    … TeO2-based devices for quantum applications, the thermo-optic coefficient (TOC) of TeO2 is an important metric. This coefficient has not been extensively investigated in thin films. This value is essential to understand the operation of microring resonators (MRRs), a proposed structure to generate …

    mcmaster Repository record for Thermo-optic Characterization of tellurium oxide thin films for nonlinear and quantum photonic applications (opens in a new tab)

  10. 3D Printing for Optical Fibre Applications

    … polycarbonate. The first microstructured polymer optical fibre was then fabricated from the 3D-printed solid-core polycarbonate preform. This was the first fibre drawn from a 3D-printed preform to show single-mode operation (at a wavelength of 870 and 1550 nm). Moreover, the fibre displayed the …

    aston Download PDF for 3D Printing for Optical Fibre Applications (opens in a new tab)

  11. Fabrication of Alkaline-Earth Fluoride Ceramics for High-Power Lasers via Fusion Casting and Hot Forging

    … and nonlinear refractive indices, negative thermo-optic coefficient, high thermal conductivity, low intrinsic optical loss over a broadband spectrum and ability to incorporate rare-earth ions with low quantum defects are just a few of their attractive properties. Traditionally grown from the …

    ucf Repository record for Fabrication of Alkaline-Earth Fluoride Ceramics for High-Power Lasers via Fusion Casting and Hot Forging (opens in a new tab)

  12. Laser-induced crystallization mechanisms in chalcogenide glass materials for advanced optical functionality

    … candidates for gradient refractive index (GRIN) optics. These multi-phase, composite materials also exhibit improved physical properties as compared to the parent base glass resulting from the formation of a secondary crystalline phase(s). Nanocrystal phase formation in a multi-component …

    ucf Repository record for Laser-induced crystallization mechanisms in chalcogenide glass materials for advanced optical functionality (opens in a new tab)

  13. Whispering Gallery Mode Microresonators for Lasing and Single Nanoparticle Detection

    … including sensing, lasing, nonlinear optics, and so forth. However, temperature fluctuations as one of the most common environmental noises disturb the cavity resonances and thus degrade the device stability and sensitivity. We introduce a wetting technique to coat the silica resonator …

    wustl Repository record for Whispering Gallery Mode Microresonators for Lasing and Single Nanoparticle Detection (opens in a new tab)

  14. Wavelength stabilization of segmented microring in silicon on insulator for multi-level pulse amplitude modulation

    Within modern silicon-photonics-based optical communication systems, silicon microring modulators emerge as promising components, offering remarkable advantages in density, energy efficiency, and wavelength-division multiplexing operation. Segmenting these microring modulators and driving each …

    ubc Repository record for Wavelength stabilization of segmented microring in silicon on insulator for multi-level pulse amplitude modulation (opens in a new tab) Download PDF for Wavelength stabilization of segmented microring in silicon on insulator for multi-level pulse amplitude modulation (opens in a new tab)

  15. The design and application of polymeric materials in a novel light modulated accelerometer.

    … the development of the accelerometer the stress-optic and thermo-optic coefficients have been determined for a range of polymeric materials.The stress optic coefficient was determined for polycarbonate, polymethyl methacrylate, polvinyl chloride and araldite epoxy resin using a circular …

    sheffield-hallam Download PDF for The design and application of polymeric materials in a novel light modulated accelerometer. (opens in a new tab)

  16. Ολοκληρωμένοι οπτικοί δρομολογητές για οπτικά δίκτυα διασύνδεσης υπολογιστικών συστημάτων

    … PhD thesis was the design and the study of an optical router-on-chip architecture for efficient high-throughput and low-power data packet routing. The development of such a router was based on the merge of three different technologies into the same silicon-on-insulator (SOI) platform, simply by …

    greece Repository record for Ολοκληρωμένοι οπτικοί δρομολογητές για οπτικά δίκτυα διασύνδεσης υπολογιστικών συστημάτων (opens in a new tab)

  17. INVESTIGATION OF THERMO-OPTIC EFFECTS IN SILICON MICRORING RESONATORS FOR SENSING AND INTERROGATION

    … performance and reducing the volume and cost of optical sensing systems. Among many integrated photonic structures, silicon microring resonators have received much attention for both sensing and interrogation. Particularly, the high quality-factor of the microring resonators and the large …

    maryland Repository record for INVESTIGATION OF THERMO-OPTIC EFFECTS IN SILICON MICRORING RESONATORS FOR SENSING AND INTERROGATION (opens in a new tab)

  18. Molten Core Fabrication of Intrinsically Low Nonlinearity Glass Optical Fibers

    Optical nonlinearities limit scaling to higher output powers in modern fiber-based laser systems. Paramount amongst these parasitic phenomena are stimulated Brillouin scattering (SBS), stimulated Raman scattering (SRS), and nonlinear refractive index (n2)-related wave-mixing phenomena (e.g., …

    clemson Repository record for Molten Core Fabrication of Intrinsically Low Nonlinearity Glass Optical Fibers (opens in a new tab)

  19. Ανάλυση, σχεδίαση και χαρακτηρισμός ολοκληρωμένων φωτονικών διατάξεων υβριδικής τεχνολογίας αγωγού - διηλεκτρικού - πυριτίου

    … maturity, deep understanding and diverseoptical properties of silicon and secondly from the extreme subwavelength confinement and naturalmetal/dielectric neighboring provided by plasmonic structures. The targeted breakthrough is designingintegrated components for optical communications …

    greece Repository record for Ανάλυση, σχεδίαση και χαρακτηρισμός ολοκληρωμένων φωτονικών διατάξεων υβριδικής τεχνολογίας αγωγού - διηλεκτρικού - πυριτίου (opens in a new tab)

  20. Applying Fibre Bragg Grating Fabry-Perot Resonators for Filtering and Sensing Applications

    Fibre optic Fabry-Perot cavities stand on the shoulders of two formidable domains of physics: optical fibres [1] and precision interferometry [2–6]. These compact devices harmoniously combine the robustness of fibre with the high measurement sensitivity of interferometry [7]. Fibre cavities are …

    adelaide Repository record for Applying Fibre Bragg Grating Fabry-Perot Resonators for Filtering and Sensing Applications (opens in a new tab)

Page 1 of 2