Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"Thermocompression bonding"”.

  1. Low cost fabrication techniques for embedded resistors on flexible organics at millimeter wave frequencies

    … available foils to produce resistors using only thermocompression bonding and wet chemical etching. The second method utilizes electroless plating with a modified plasma treatment to promote adhesion to organic materials. This process uses only chemical baths to form the thin films. Several RF …

    gatech Repository record for Low cost fabrication techniques for embedded resistors on flexible organics at millimeter wave frequencies (opens in a new tab)

  2. Multilayer Micromachined RF MEMS Filters at Ka and L/S Band For On-Board Satellite Communication Systems

    … critical fabrication steps like wafer to wafer thermocompression bonding using gold (Au) and silver (Ag) as an intermediate layer and fabrication of Through Silicon Vias (TSV).

    trento Repository record for Multilayer Micromachined RF MEMS Filters at Ka and L/S Band For On-Board Satellite Communication Systems (opens in a new tab)

  3. Indium Thin Films in Multilayer Superconducting Quantum Circuits

    … The chapter further delves into indium bump bonding, an essential technique in multilayer circuit fabrication.In Chapter 3, we experimentally demonstrate a thermocompression bonding technology between on-chip indium thin films and apply it to capped superconducting devices. These devices can …

    waterloo Repository record for Indium Thin Films in Multilayer Superconducting Quantum Circuits (opens in a new tab)

  4. Low-cost polymer-based microfluidic systems

    … microchannel fabrication, microchannel sealing (bonding) and integration technologies. For microchannel fabrication, different low-cost methods such as laser ablation and deep-UV patterning will be introduced in this research. For microchannel sealing method, the thermocompression bonding …

    ubc Repository record for Low-cost polymer-based microfluidic systems (opens in a new tab) Download PDF for Low-cost polymer-based microfluidic systems (opens in a new tab)

  5. Inverse Hybrid Bonding with Metal Organic Framework as Infill for Heterogeneous Integration

    This thesis presents Inverse Hybrid Bonding (IHB) as a novel fine-pitch die-to-die (D2D)/die-to-wafer (D2W) bonding scheme for heterogeneous integration. IHB is a two-step process wherein (1) Direct copper bonding is used for I/O connections, and (2) ALD-CVD deposition of Metal Oxide Framework …

    gatech Repository record for Inverse Hybrid Bonding with Metal Organic Framework as Infill for Heterogeneous Integration (opens in a new tab)

  6. Characterization and Design of Liquid Crystal Polymer (LCP) Based Multilayer RF Components and Packages

    … LCP-based RF circuits. These processes include thermocompression bonding with tight temperature control (within a few degrees Celsius), precise multilayer alignment and patterning, and LCP laser processing with three different types of lasers. A proof-of-concept design that resulted from this …

    gatech Repository record for Characterization and Design of Liquid Crystal Polymer (LCP) Based Multilayer RF Components and Packages (opens in a new tab)

  7. Low-temperature solid-liquid interdiffusion bonding for heterogeneous integration

    … for the assembly process. Low-temperature bonding techniques are one of the key technologies to address this problem and fully realize the potential of heterogeneous integration. Among the numerous bonding methods, this dissertation explores the low-temperature bonding processes based on …

    aalto Repository record for Low-temperature solid-liquid interdiffusion bonding for heterogeneous integration (opens in a new tab)

  8. Chemically Sintered Cu Nanocrystal Thin Films and Multiscale Devices

    … solders for low-thermal-budget Cu–Cu direct bonding. Solid-state exchange with halide salts activates Cu NC interlayers before thermocompression bonding, regulating ligand removal, oxide suppression, and grain evolution. Iodide-treated Cu NC interlayers enable preliminary Cu–Cu bonding at 200 …

    penn Repository record for Chemically Sintered Cu Nanocrystal Thin Films and Multiscale Devices (opens in a new tab)

  9. Thermoplastic microfluidic technologies for portable and disposable bioanalytical and diagnostic platforms

    … microfluidic devices where channel formation and bonding are combined into a single step, resulting in fully enclosed microfluidic channels within 30 minutes. Chemical surface passivation by UV-ozone treatment is utilized in combination with orogenic swelling and thermocompression bonding to …

    maryland Repository record for Thermoplastic microfluidic technologies for portable and disposable bioanalytical and diagnostic platforms (opens in a new tab)

  10. The Mathematical Modelling of Electrical and Thermal Acceleration Factors in VLSI Conductors

    … layer suitable for wire or tape ultrasonic-thermocompression bonding, usually involving aluminium or gold, or soldering using lead-tin alloys. When a semiconductor device is fabricated, it goes through a number of processes at the end of which it is metallized, passivated, encapsulated, and …

    southwales Repository record for The Mathematical Modelling of Electrical and Thermal Acceleration Factors in VLSI Conductors (opens in a new tab) Download PDF for The Mathematical Modelling of Electrical and Thermal Acceleration Factors in VLSI Conductors (opens in a new tab)

  11. A Map to Reliable Chip-To-Package Cu-Pillar Interconnections With Sintered Nanoporous-Cu Caps

    … at the foundry level via the now mature hybrid bonding process, though its reliance on expensive chemical-mechanical planarization (CMP) processes and material incompatibilities preclude it from being used at the package level, where the levels of non-coplanarity and warpage that exist cannot be …

    gatech Repository record for A Map to Reliable Chip-To-Package Cu-Pillar Interconnections With Sintered Nanoporous-Cu Caps (opens in a new tab)

  12. Rapid fabrication methods and modular packaging of chip-based microreactors for harsh multiphase reactions

    … was developed to be packed either by compression bonding, using optimized sealing structures and PTFE as gasket layer or by thermocompression bonding of nickel or gold layers and thus encapsulating the microfluidic channel. Bonding was carried out with silicon and sapphire substrate, while the …

    freiburg-diss Repository record for Rapid fabrication methods and modular packaging of chip-based microreactors for harsh multiphase reactions (opens in a new tab)

  13. Modeling, design and demonstration of large 2.5D glass BGA packages for balanced chip-and-board-level reliability

    … demonstrated for mitigating warpage induced by thermocompression bonding on ultra-thin, low- and- high-CTE substrates at I/O pitches below 50µm. By selecting optimum thermal profiles for mitigating chip-level assembly warpage, board-level assembly is enabled at larger package sizes, and …

    gatech Repository record for Modeling, design and demonstration of large 2.5D glass BGA packages for balanced chip-and-board-level reliability (opens in a new tab)

  14. Reliable fine-pitch chip-to-substrate copper interconnections with high-through assembly and high power-handling

    … are proposed, based on design of nanoscale bonding interfaces for assembly throughput, and electrical, thermal and reliability performances. The first approach utilizes novel Au-based bimetallic thin-films applied on Cu bumps and pads to prevent oxidation and enhance bonding reactivity. This …

    gatech Repository record for Reliable fine-pitch chip-to-substrate copper interconnections with high-through assembly and high power-handling (opens in a new tab)

  15. Modeling, design and demonstration of ultra-short, fine-pitch solder-based interconnection systems with high-throughput assembly

    … brings a shift from conventional reflow to thermocompression bonding. Leading-edge TC-NCP (thermocompression with non-conductive paste) processes, first established by Amkor, have shown high promises for fine-pitch assembly at 40µm pitch and below. Through dynamic control of the temperature …

    gatech Repository record for Modeling, design and demonstration of ultra-short, fine-pitch solder-based interconnection systems with high-throughput assembly (opens in a new tab)

  16. Characterization of Manifold Microchannel Heat Sinks During Two-Phase Operation

    … into each side of four silicon wafers and then thermocompression bonding the wafers together. The resulting manifold is a compact, leak-free device that is used to deliver fluid to the array of heat sinks and recollect the outlet flow from the heat sinks. A sample manifold was diced, revealing a …

    purdue-thes Repository record for Characterization of Manifold Microchannel Heat Sinks During Two-Phase Operation (opens in a new tab)

  17. Nanowires for 3d silicon interconnection – low temperature compliant nanowire-polymer film for z-axis interconnect

    Semiconductor chip packaging has evolved from single chip packaging to 3D heterogeneous system integration using multichip stacking in a single module. One of the key challenges in 3D integration is the high density interconnects that need to be formed between the chips with through-silicon-vias …

    cork Repository record for Nanowires for 3d silicon interconnection – low temperature compliant nanowire-polymer film for z-axis interconnect (opens in a new tab)