Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 183 for “"Thermomechanical Processing"”.
-
Thermomechanical processing for optimized bar steels
Includes bibliographical references (pages 79-82).
-
Thermomechanical processing of M-50 steel.
Thermomechanical processing of AISI M-50 bearing steel was accomplished by an initial austenitize and quench followed by reheating and warm-rolling to a true strain of 2.0. Warm-rolling was successfully conducted at 650, 700, or 750°C. The effect of austenitizing temperature on grain size and …
-
Thermomechanical Processing Of Mg-Li-Al Ultralight Alloys
… and a dual phase Mg-14Li-Al (wt%) are first thermomechanically processed through hot compression tests. Then microstructure, post thermomechanical properties, and hot compression stress-strain curves are studied. The main objective is to correlate the microstructure with the small scale …
-
Thermomechanical processing of aluminum alloy 2090 for superplasticity
The effect of processing variables on the microstructural development and superplasticity of aluminum alloy 2090, a high strength Aluminum-Copper-Lithium-Zirconium alloy of reduced density in comparison to other A1-based materials, was investigated. Following previous research, warm rolling was …
-
THERMOMECHANICAL PROCESSING OF MICROALLOYED STEELS: EXPERIMENTS AND MODELLING
… and precipitation constitute the fundamentals of thermomechanical controlled processing (TMCP) of microalloyed steels. In-depth understanding of these phenomena is indeed needed. In this work, the individual components and some of the potential mutual interactions have been investigated …
-
Microstructural response of aluminum-magnesium alloys to thermomechanical processing.
… 15% to 19% magnesium were exposed to various processing schemes, and the resulting microstructures were examined. Isothermal forging resulted in some refinement depending on the temperature, strain and strain rate. However, all samples isothermally forged exhibited microstructures having …
-
Microstructure development of complex phase steels during thermomechanical processing
… candidates to improve steel properties through thermomechanical controlled processing (TMP). This thesis focuses on investigating different TMP schedules in a CP steel composition to evaluate the microstructure evolution and mechanical properties. The potential of the alloying elements has been …
-
Thermomechanical Processing of Structural Steels with Dilute Niobium Additions
… wt%) on austenite microstructure evolution along thermomechanical processing, in terms of austenite recrystallisation and grain growth, were investigated using steels with three carbon content levels. At the homogenisation temperature of 1250°C, all dilute Nb additions were dissolved in low carbon …
-
Thermomechanical processing of 34CrNiMo6 steel for Large Scale Forging
This work simulated the thermo-mechanical processing of large-scale forging product made of 34CrNiMo6 steel to evaluate the effect of different processing condition parameters and cooling rates on the variation of microstructure and the final mechanical properties. Through this investigation we …
-
Microstructural development of duplex stainless steels during thermomechanical processing
… resistance due to their duplex microstructure. Thermomechanical processing (TMP) is as one of the most common manufacturing methods of such steel, concerning its hot ductility and precipitation behaviour. The microstructural development during serval different TMP procedures was investigated in …
-
Thermomechanical processing of microalloyed bar steels for induction hardened components
Thermomechanical processing (TMP) of microalloyed steels has been shown to produce refined microstructures by austenite grain boundary pinning and elevation of the austenite no-recrystallization temperature. This project investigated the effects of chemical composition (specifically, Al, V, and …
-
Thermomechanical processing of ferrite-martensite steels for power plant applications
… nickel and manganese additions on critical processing temperatures and transformation behavior. Specifically, this research aims to investigate the influence of austenite being deformed either above the recrystallization-limit temperature T95% or below the recrystallization-stop temperature …
-
Strain-induced precipitation during the thermomechanical processing of AA6111 alloy
… the effect of inter-pass time during thermomechanical processing of AA61111 on flow behaviour and microstructure evolution has been investigated. This was achieved using plane strain compression testing undertaken on the Sheffield Thermomechanical Compression (TMC) facility, using the …
-
Thermomechanical processing of bulk metallic glasses to enhance mechanical properties
… can also be modified after glass formation via thermomechanical processing. Modifications of glass structures towards lower-energy states are called structural relaxation. In the opposite direction to relaxation, rejuvenation brings BMGs into higher energy states that are further away from …
-
Thermomechanical processing of blended elemental powder Ti-6Al-4V alloy
… preforms and then subjecting these preforms to thermomechanical processing (TMP) in an attempt to both improve the relative density and refine the microstructure. The powders used were direct reduction titanium powder and elemental aluminium and vanadium powders.
-
Thermomechanical Processing of Tungsten and Its Alloys for Fusion Energy Applications
… by tailoring tungsten’s microstructure through thermomechanical processing and alloying strategies. Finite element simulations and systematic experiments demonstrated that edge chamfering significantly improved rollability by reducing stress concentrations. The effects of hot rolling (~1250 °C), …
-
Thermomechanical processing of aluminum alloy 2519 for grain refinement and superplasticity
Thermomechanical processing (TMP) methods developed for Al-MG and Al-Mg-Li alloys have been modified and applied to the commercial 2519 Al-Cu alloy. The TMP included initial overaging and was designed to facilitate particle-stimulated nucleation (PSN) of recrystallization during controlled …
-
Grain size control in AA5083: thermomechanical processing and particle stimulated nucelation
… the as-cast condition was subjected to various thermomechanical processes intended to refine the grain size. Particle stimulated nucleation (PSN) theory was employed to develop the thermomechanical processes. These processes all involved initial homogenization and hot working. Subsequent …
Page 1 of 10