Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Thomson Effect"”.

  1. The Joule-Thomson effect in air

    Thesis (M.A.)--University of Kansas, Physics, 1928.

    ku Repository record for The Joule-Thomson effect in air (opens in a new tab)

  2. Analytical Models for Flowing-Fluid Temperature Distribution in Single-Phase Oil Reservoirs Accounting for Joule-Thomson Effect

    … In a high- pressure drawdown environment, Joule-Thomson (J-T) phenomenon plays an important role in fluid temperature alteration in the reservoir. In this study, we developed a robust analytical model to estimate the flowing-fluid-temperature distribution in the reservoir accounting for J-T …

    tamu Repository record for Analytical Models for Flowing-Fluid Temperature Distribution in Single-Phase Oil Reservoirs Accounting for Joule-Thomson Effect (opens in a new tab)

  3. The Conglomerate Test As A Magnetic Means Of Placing A Temperature Minimum On The Diatremes At OKA Canada

    … budget modelling taking into account the Joule-Thomson effect, addition of relatively cold xenoliths, the heat of crystallization of magma, and the original heat of the magma. A maximum of 2.4 x 1019 calories (including 10km^3 of1200°C magma and an endothermic Joule-Thomson effect) and minimum …

    temple Repository record for The Conglomerate Test As A Magnetic Means Of Placing A Temperature Minimum On The Diatremes At OKA Canada (opens in a new tab)

  4. Steady state and transient analysis of thermoelectric devices using finite element method

    … devices must be optimized based on all known effects that occur in the thermoelectric devices. The various effects that occur in a thermoelectric device are Seebeck effect, Peltier effect, Joule effect and Thomson effect. Most of the time, the design of thermoelectric generators and sensors is …

    rit Repository record for Steady state and transient analysis of thermoelectric devices using finite element method (opens in a new tab)

  5. Thermofluidic Characterization of Carbon Dioxide Near Critical Conditions at Microscale

    … dynamics, thermalization mode shift, Joule Thomson effect and pressure drop evaluation. It was found that extremely low superheat temperatures are required for boiling inception near the critical conditions (i.e., T=31.4 °C, and P=7.37 MPa), and boiling heat transfer correlations were …

    ucf Repository record for Thermofluidic Characterization of Carbon Dioxide Near Critical Conditions at Microscale (opens in a new tab)

  6. Impact of solid-liquid interfacial thermodynamics on the phase change memory RESET process

    … (PCM) devices is constructed in which theGibbs-Thomson effect, representing local equilibrium at the solid-liquid interface, is included as an interfacial condition for the electro-thermal model of the PCM device. A comparison is made between the Gibbs-Thomson model and a commonly used model in …

    washington Repository record for Impact of solid-liquid interfacial thermodynamics on the phase change memory RESET process (opens in a new tab)

  7. Preparation of Thermoelectric Nanocrystals for Energy Applications

    … problems. There are three thermoelectric effects: the Seebeck effect (temperature to current), Peltier effect (current to temperature), and Thomson effect (conductor heating/cooling). However the efficiency of thermoelectric materials has been rather low for practical applications, …

    iastate Repository record for Preparation of Thermoelectric Nanocrystals for Energy Applications (opens in a new tab)

  8. Hydrogen energy storage in porous geological formations

    … dimensions, on induced hydraulic and thermal effects and on geophysical monitoring techniques. For this end, a coupling approach for the scientific open source simulator OpenGeoSys and the proprietary reservoir simulator ECLIPSE is developed. The coupled simulator combines the …

    cau-kiel Repository record for Hydrogen energy storage in porous geological formations (opens in a new tab)

  9. Nanoscale thermal transport for biological and physical applications

    … able to travel through it. In this thesis, the effects of surface stress on the lattice thermal conductivity are presented for a silicon nanowire. Based on a continuum approach, a phonon dispersion relation is derived for a nanowire that is under surface stress and the phonon relaxation time is …

    vt Repository record for Nanoscale thermal transport for biological and physical applications (opens in a new tab)

  10. Phase-field Modeling of Phase Change Phenomena

    … In particular, we explain how the Gibbs-Thomson effect and the kinetic effect are recovered. Thirdly, we couple the Allen-Chan and heat transfer equations in a way that the whole system has the energy decay property. We also propose a convex-splitting-based numerical scheme that satisfies …

    vt Repository record for Phase-field Modeling of Phase Change Phenomena (opens in a new tab)

  11. Fundamental understanding of the growth, doping and characterization of aligned zno nanowires

    … carbo-thermal reduction of ZnO powders, and the effects of growth parameters on the properties of ZnO NW arrays were studied by scanning and transmission electron microscopy, X-ray diffraction, photoluminescence and Raman spectroscopy. Based on the phonon mode selection rules in wurtzite ZnO, …

    alabama Repository record for Fundamental understanding of the growth, doping and characterization of aligned zno nanowires (opens in a new tab)

  12. Nanobrazing of Inconel 718 and Ti-6Al-4V

    … use of melting point depressants via the Gibbs-Thomson effect. Until the studies discussed in this dissertation, nanomaterials as the sole brazing material are seldom investigated. In this dissertation, we discuss nanomaterial brazing (nanobrazing) material performance when joining Inconel 718 …

    utk-theses Repository record for Nanobrazing of Inconel 718 and Ti-6Al-4V (opens in a new tab)

  13. Experimental and computational investigations of binary solidification

    … by the diffusion of solute and the Gibbs-Thomson effect. Solutal diffusion, is accurately treated, diffusing differently through liquid than through solid. The interface curvature is approximated using a template method, into which crystalline anisotropy has also been introduced. Several …

    arizona-thes Repository record for Experimental and computational investigations of binary solidification (opens in a new tab)

  14. Theoretical study of Joule-Thomson coefficient

    Includes bibliographical references.

    colo-mines Repository record for Theoretical study of Joule-Thomson coefficient (opens in a new tab)

  15. Multiphysical simulation of CO₂ enhanced oil recovery in unconventional reservoirs: from fundamental physics to simulator development

    … a novel transport model for the gas slippage effect of multicomponent gases in unconventional reservoirs. The model is essentially a second-order slippage boundary condition, based on kinetic theory of gases. The model has been validated with respect to both physical experimental data and …

    colo-mines Repository record for Multiphysical simulation of CO₂ enhanced oil recovery in unconventional reservoirs: from fundamental physics to simulator development (opens in a new tab)

  16. Thermoelectric Energy Harvesting for Sensor Powering

    … of the model. This model can quantize the effects of the Thomson effect, contact thermal and electrical resistance, and heat leakage, on the performance of a thermoelectric generator. The heat sink can be another issue for the design of high-performance TEG. An innovative heat sink design …

    vt Repository record for Thermoelectric Energy Harvesting for Sensor Powering (opens in a new tab)

  17. Comprehensive Modeling of Novel Thermal Systems: Investigation of Cascaded Thermoelectrics and Bio-Inspired Thermal Protection Systems Performance

    Thermal systems involve multiple components assembled to store or transfer heat for power, cooling, or insulation purpose, and this research focuses on modeling the performance of two novel thermal systems that are capable of functioning in environments subjected to high heat fluxes. The first …

    vt Repository record for Comprehensive Modeling of Novel Thermal Systems: Investigation of Cascaded Thermoelectrics and Bio-Inspired Thermal Protection Systems Performance (opens in a new tab)

Page 1 of 2