Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Three-Phase Voltage Source Inverter"”.

  1. Fault detection design for three-phase voltage source inverter in power train applications

    … detection methods tailored specifically for three-phase inverters, critical components within the propulsion systems of Electric Vehicles (EVs) and drive systems in general. A notable focal point of this study involves the application of advanced signal processing techniques to adeptly …

    uoit Repository record for Fault detection design for three-phase voltage source inverter in power train applications (opens in a new tab)

  2. Direct torque control of a three-phase voltage source inverter-fed induction machine

    … various techniques to control the torque of a voltage source inverter-fed induction motor. The three methods investigated here are voltage by frequency, known as scalar control, field-oriented control with and without space vector modulation, and direct torque control. Although all three …

    nps Repository record for Direct torque control of a three-phase voltage source inverter-fed induction machine (opens in a new tab)

  3. Three-Phase Voltage Source Inverter with Very High Efficiency Based on SiC Devices

    This dissertation aims at designing a three-phase voltage source inverter based on the SiC devices and mainly the SiC-MOSFET. The designed inverter offers a possibility to drive the power inverter with a very high efficiency, which can reach up to 99% for 16 kW rated power. The design is dedicated …

    qucosa-diss

  4. Design Approach for a Three-Phase Voltage Source Inverter with Low Harmonic Distortion for a Wide Range of Operating Conditions

    DC-AC power electronic converters, or inverters, are frequently used in AC motor drives, in AC grid interfaces of renewable energy sources and energy storage units and to supply AC power to loads in stand-alone systems. They are usually of the Voltage Source Inverter (VSI) type and are expected to …

    concordia Download PDF for Design Approach for a Three-Phase Voltage Source Inverter with Low Harmonic Distortion for a Wide Range of Operating Conditions (opens in a new tab)

  5. High Power Density and Overcurrent Protection Challenges in the Design of a Three-Phase Voltage Source Inverter for Motor Drive Applications

    The voltage source inverter (VSI) is certainly the most popular topology used in dc to ac power conversion. Virtually every commercial electric motor is driven by a VSI. There is a need for smaller and more efficient drives in high performance applications that is dictating unprecedented power …

    vt Repository record for High Power Density and Overcurrent Protection Challenges in the Design of a Three-Phase Voltage Source Inverter for Motor Drive Applications (opens in a new tab)

  6. Modified Space Vector Modulation for a Zero-Voltage Transition Three-Phase to DC Bi-directional Converter

    … space vector modulation algorithm for a zero-voltage transition three-phase voltage source inverter/boost rectifier is presented. The converter is intended for high performance medium power applications requiring bi-directional power flow. The proposed modified space vector modulation allows …

    vt Repository record for Modified Space Vector Modulation for a Zero-Voltage Transition Three-Phase to DC Bi-directional Converter (opens in a new tab)

  7. Synthetic space vector modulation

    … systems, the need exists for simple, reliable three-phase voltage source inverter (VSI) powered induction machines. Until recently, VSIs utilized a pulse width modulation (PWM) scheme controlling the frequency and amplitude of each phase. A novel and simple hardware centered VSI controller was …

    nps Repository record for Synthetic space vector modulation (opens in a new tab)

  8. Development of a power electronics for a flywheel energy storage system

    … brushless DC motor/generator, the operation of three-phase voltage source inverter/rectifier can be simplified to that of a bi-directional DC-DC converter, allowing the use of mostly analog control. Second, there is a problem associated with the existing six-step brushless DC motor/generator …

    vt Repository record for Development of a power electronics for a flywheel energy storage system (opens in a new tab)

  9. On Methodology for Verification, Validation and Uncertainty Quantification in Power Electronic Converters Modeling

    … The accuracy of the switching model of a three-phase Voltage Source Inverter (VSI) is quantitatively assessed following the proposed procedure. Accordingly, this thesis describes the hardware design and development of the switching model of the three-phase VSI.

    vt Repository record for On Methodology for Verification, Validation and Uncertainty Quantification in Power Electronic Converters Modeling (opens in a new tab)

  10. Single-Stage Three-Phase Buck-Boost DC/AC Converter Design, Analysis, and Validation

    Three-phase DC/AC power converters enable several applications including photovoltaic systems, electric traction inverters, uninterruptible power supplies, and utility systems. The classical three-phase voltage source inverter (VSI) topology only operates in voltage step-down or buck mode of …

    portland-state Repository record for Single-Stage Three-Phase Buck-Boost DC/AC Converter Design, Analysis, and Validation (opens in a new tab)

  11. SHIPBOARD VOLTAGE SOURCE INVERTER CONTROL SYSTEM TO MEET MIL-STD-1399-300 LIMITS FOR PULSED POWER LOADS

    … explores a novel controller design for a three-phase voltage source inverter (VSI) that limits the transients on a microgrid while simultaneously correcting the grid power factor to unity. Specifically, transients produced by pulsed power loads as specified in MIL-STD-1399 section 300 are …

    nps Repository record for SHIPBOARD VOLTAGE SOURCE INVERTER CONTROL SYSTEM TO MEET MIL-STD-1399-300 LIMITS FOR PULSED POWER LOADS (opens in a new tab)

  12. Power losses and thermal modeling of a voltage source inverter

    … presents thermal and power loss models of a three phase IGBT voltage source inverter used in the design of the 625KW fuel cell and reformer demonstration which is a top priority for the Office of Naval Research. The ability to generate thermal simulations of systems and to accurately predict …

    nps Repository record for Power losses and thermal modeling of a voltage source inverter (opens in a new tab)

  13. A Distributed Digital Control Architecture for Power Electronics Systems

    … digital controller partitions the controller in three levels of control authority. The power stage controller, designated as hardware manager, is responsible for low-level hardware oriented tasks; the high level controller, designated as applications manager, performs higher-level …

    vt Repository record for A Distributed Digital Control Architecture for Power Electronics Systems (opens in a new tab)

  14. Fault Tolerant Sensorless Permanent Magnet Synchronous Motor Drives

    … focused on developing highly redundant, multiphase fault-tolerant solutions able to assure a very high fault tolerance level. However, many other applications would benefit from the availability of solutions ensuring an acceptable level of fault tolerance. The present work shows that, if …

    catania Repository record for Fault Tolerant Sensorless Permanent Magnet Synchronous Motor Drives (opens in a new tab)

  15. Analysis and design of matrix converters for adjustable speed drives and distributed power sources

    … of some practical issues such as common mode voltage effects, high susceptibility to input power disturbances and low voltage transfer ratio. This dissertation proposes several new matrix converter topologies together with control strategies to provide a solution about the above issues. In …

    tamu Repository record for Analysis and design of matrix converters for adjustable speed drives and distributed power sources (opens in a new tab)

  16. A Low-Inductance SiC Bare-Die Half-Bridge Power Module for Traction Inverter Applications

    Conventional traction inverters employ packaged power devices such as the TO-247, which introduce wire-bond lead inductance, high junction-to-case thermal resistance, and a large package footprint that constrains PCB layout and increases commutation-loop inductance. These limitations result in …

    maryland Repository record for A Low-Inductance SiC Bare-Die Half-Bridge Power Module for Traction Inverter Applications (opens in a new tab)

  17. Hybrid PWM Update Method for Time Delay Compensation in Current Control Loop

    … cycle range. Without the Td one to cause linear phase shifts that limit the control bandwidth and affect closed-loop stability, a very high quality digital current control can be achieved, such as a high closed current loop bandwidth, strong robustness against disturbances, ability to reach a …

    vt Repository record for Hybrid PWM Update Method for Time Delay Compensation in Current Control Loop (opens in a new tab)

  18. Theoretical analysis and reduction techniques of DC capacitor ripples and requirements in inverters

    … for many conventional topologies, such as three-phase voltage source inverter (VSI), H-bridge VSI and etc. Minimization of the dc capacitor is an essential step towards developing and manufacturing compact low-cost inverter systems for high temperature operation, long life and high …

    msu Repository record for Theoretical analysis and reduction techniques of DC capacitor ripples and requirements in inverters (opens in a new tab)

  19. Electric-thermal modelling of power electronics components

    … thermal interaction has been studied for the three applications which include a boost converter, a three-phase voltage source inverter and an IPT based dual interleaved bidirectional boost converter. The variation of temperature due to thermal coupling has been found significant in all these …

    greenwich Download PDF for Electric-thermal modelling of power electronics components (opens in a new tab)

  20. Development of fast multi-system simulation models for permanent magnet synchronous motor and generator drive systems

    … validation of alternative simulation models for voltage source inverter fed permanent magnet synchronous machine drive systems which can rapidly and accurately analyse and evaluate the performance of PM machine drives and associated control system designs. Traditionally simulations have been …

    glasgow Download PDF for Development of fast multi-system simulation models for permanent magnet synchronous motor and generator drive systems (opens in a new tab)

Page 1 of 2