Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Three-dimensional Flow Effects"”.
-
Aerodynamic Evaluation of Intermediate Compressor Ducts with Integrated Heat Exchangers
… of such ducts is influenced by complex flow phenomena, including diffuser flow separation, swirl, three-dimensional flow structures, adverse pressure gradients and strong curvature. This thesis investigates the aerodynamic performance of two ICD geometries with integrated heat exchangers …
-
Semi-Empirical Modeling of Two-Dimensional and Three-Dimensional Dynamic Stall
… this thesis, not only counts for the well-known, three-dimensional flow effects on the stalled loads but also captures the secondary vortex-shedding phenomenon that has been seen in experiments. The fundamental physics that modify dynamic-stall behavior and that have been extended from …
-
Development of an Analysis and Design Optimization Framework for Marine Propellers
… lifting-surface corrections to account for the three-dimensional flow effects has been developed. The prediction of the correction factors is achieved using Artificial Neural Networks and Support Vector Regression. This approach results in increased approximation accuracy compared to existing …
-
Coupling RELAP5-3D and Fluent to analyze a Very High Temperature Reactor (VHTR) outlet plenum
… the two codes in this manner, the important three-dimensional flow effects in the outlet plenum are well modeled without having to model the entire reactor with a computationally expensive code such as Fluent. The two codes were successfully coupled. The values of pressure, mass flow rate and …
-
Using contoured endwalls to achieve proper scaling for a gas turbine vane model using a low speed testing facility
… and more accurately measured data. However, flow in engine scale turbines reaches well into the compressible gas range while low speed facilities run in the incompressible fluid range, and engines have three dimensional flow effects due to having contoured endwall while traditional cascade …
-
Experimental investigation of the characteristics of self-excited flow oscillations in vaneless radial diffusers
Self-excited flow oscillations in vaneless radial diffusers have been investigated experimentally to determine the effects of Reynolds number and diffuser geometry on the spatial and temporal characteristics of the phenomena. The ranges of Reynolds number, diffuser width to inlet diameter ratio and …
-
Flow-induced vibration of elastically supported rectangular cylinders
… degree incidence in a nearly turbulence-free flow field. The models were elastically suspended in the wind tunnel and constrained to a single degree of freedom, vertical motion transverse to the wind flow direction.;Five tests were conducted for every aspect ratio, each with a different system …
-
A NUMERICAL AND EXPERIMENTAL STUDY OF UNSTEADY LOADING OF HIGH SOLIDITY VERTICAL AXIS WIND TURBINES
… vertical axis wind turbines (VAWTs). Two-dimensional, unsteady Reynolds averaged Navier-Stokes simulations of a small scale, high solidity, H-type Darrieus vertical axis wind turbine revealed the dominant effect of dynamic stall on the power production and vibration excitation of the …
-
Hydrodynamic design of multi-rotor tidal array
… the design process and to reveal detailed flow physics. The blade loading distributions in the mid-span region from the design model shows good agreement with the those from the blade-resolved model. Discrepancies are observed in the blade root and tip regions, primarily due to the three- …
-
Flow-Interactive Control of a Flexible Wing Using Aerodynamic Distributed Bleed Actuation
… 3-D flexible wing model and the embedding cross flow were explored in wind tunnel investigations for effecting tunable structural and aeroelastic characteristics by exploiting regulation of the aerodynamic loads that are effected by fluidic actuation. The aerodynamic loads are regulated using …
-
Modeling and validation of a subscale aerobatic aircraft configuration in spin
… regime of single engine aircraft is presented. A three-pronged approach is taken that involves the following components: flight testing, the development of a new analytical model for calculating the forces on a stalled spinning wing, and validation of that model through wind tunnel tests. …
-
Analysis of three-dimensional dynamic stall
… models; one a rectangular wing of aspect ratio three and the other with the same overall dimensions but with 60o swept tips. However, as most research to date has focused on nominally two-dimensional data, the results are referenced to measurements made on a nominally two-dimensional NACA 0015 …