Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 17 of 17 for “"Three-dimensional numerical analysis"”.
-
Three Dimensional Numerical Analysis of Static Pipe Bursting
… may be damaged. Pipe bursting involves a complex three dimensional response of the ground surrounding the old pipe. A three dimensional numerical study has therefore been undertaken to explicitly simulate propagation of the burst head, and study the response of soil and adjacent pipelines in …
-
Three-dimensional numerical analysis of reflective cracks in airfield pavements
… raveling, and moisture infiltration. The analysis of reflective cracking involves all modes of fracturing i.e., Mode I (opening), Mode II (shearing), and Mode III (tearing) [61] and thus 3-D models are required. The need for true 3-D modeling of reflective cracking complicates the …
-
Three dimensional numerical analysis for flow prediction in positive displacement screw machines
… is estimated by assuming simplified one-dimensional flow through passages with dimensions that are invariant with temperature and pressure. As manufacturing accuracy increases, clearances can be reduced and compressors thereby made smaller and more efficient. However to obtain full …
-
Cyclic Analysis of Laterally Loaded Pile Foundations
A three-dimensional numerical analysis, based on the indirect boundary element method, is developed to model the cyclic behaviour of laterally loaded pile foundations embedded in cohesive soils. Phenomena observed in cyclic pile-load tests, such as gapping, backsliding and soil strength degradation …
-
Analysis of Gas Turbine Test Cell #1 Lemoore Naval Air Station, California
This thesis is a three-dimensional numerical analysis of Gas Turbine Test Cell #1 at Lemoore Naval Air Station, California. The Parabolic, Hyperbolic, or Elliptic Numerical Integration Code (PHOENICS) is used to determine the steady-state aerothermal characteristics within the test cell during the …
-
Parametric study of the aerothermodynamics of a jet engine test facility
A three-dimensional numerical analysis of the Jet Engine Hush House located at Naval Air Station Jacksonville, Florida was developed using the PHOENICS computer code. The PHOENICS code was used to determine the steady state aerothermal characteristics in the Hush House produced by a Navy F-4 …
-
Modelling Stress Relaxation in Bolt Loaded CT{Specimens
… analytically. The model is compared to numerical results using Ansys. The long term bolt load relaxation rate described by the model was similar to the three dimensional numerical analysis. It should be noted that a performed experimental bolt load relaxing experiment was performed, but …
-
Μέθοδος απλουστευμένης τριδιάστατης αριθμητικής ανάλυσης πασσάλων υπό συνδυασμένη φόρτιση
… development during the recent years, the use of three-dimensional non-linear analysis remains a procedure of high computational cost. It is therefore an area of increased scientific interest to propose a simplified method, capable to provide kinematic information for the surrounding soil and take …
-
A NUMERICAL STUDY OF FLUID TRANSPORT IN ATMOSPHERIC PRESSURE PLASMA JET REACTORS
This study presents a detailed, three-dimensional numerical analysis of a helium atmospheric pressure plasma jet (APPJ) operating under one-sided square-wave RF excitation. The research explores the fluid dynamics of the plasma jet as influenced by varying tube geometries, within a Reynolds number …
-
Experimental and numerical study of water single-phase pressure drop across an array of circular micro-pin-fins
… square micro-pin-fins, between roughly two to three times less. The present experimental results were also compared with the predictions of several friction factor correlations, all of which poorly estimated the experimental data. The experimental results were also compared to a …
-
Characterization and Analysis of Supersonic Flow Through De Laval Nozzles at Varied Design Conditions
A combined numerical and experimental investigation of supersonic planar nozzles under different design conditions has been conducted. Supersonic planar nozzles are common geometries observed in supersonic wind tunnels and aircraft or rocket engines. For the important role they play in wind tunnel …
-
Effect of Substrate on In-flight Particle Characteristics in Suspension Plasma Spraying
… in suspension plasma spraying. Through a three dimensional numerical analysis, this study is aimed at providing a better understanding of the effect of substrate position and curvature on in-flight particle temperature, velocity and trajectory. The high temperature and high velocity plasma …
-
Lateral Spreading Mechanics of Column-Supported Embankments
… mechanics. The research was performed using three-dimensional finite difference analyses. Limiting conditions for lateral spreading analysis were identified using case history records, and an undrained-dissipated approach was validated for the numerical analysis of limiting conditions (i.e., …
-
Análise numérica comparativa entre pontes integrais e convencionais de concreto armado sujeitas às ações indiretas de temperatura, retração e fluência
… springs with nonlinear behavior. In addition, a three-dimensional numerical analysis of three-span bridges was performed using a software based on Finite Element Method (FEM), analyzing 03 (three) different structural systems: (a) integral bridge; (b) integral abutment bridge and (c) conventional …
-
Πειραματική και υπολογιστική ανάλυση υβριδικών ηλιακών συλλεκτών για εφαρμογές ηλιακής ψύξης
… the same surface. Specifically, the aim is the numerical and experimental study of an asymmetric concentrated hybrid collector, the improvement of its performance for the region of Greece and the potential of its use in real-world applications. The first part of the dissertation presents …
-
Evaluating Behavior of Laterally Loaded Piles within MSE Walls under Static and Cyclic Loading
… head displacement equal to 20% its diameter. A three-dimensional numerical analysis using the commercial software FLAC 3D 5.01was conducted to evaluate the performance of mechanically-stabilized earth walls (MSE) with piles installed within the reinforced zone subjected to lateral loading. The …