Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Throwing power"”.
-
The Throwing Power in Chromium Plating
… cause, and methods on improvement of this poor throwing power will be treated.
-
Throwing Power of a Chromium Plating Bath Containing Hydrofluoric Acid Instead of Sulfphuric Acid
… to give the results of an investigation for the throwing power of such a solution.
-
Current Efficiency of Various Chromium Plating Baths
… be overcome in chromium plating, such as, Poor throwing power. Formation of trivalent chromium. Evolution of hydrogen at the cathode. It has been found that current efficiency is low, resulting in low throwing power, uneven plating and waste of electric energy. In this thesis it will be …
-
Effect of pulsed current on the electrodeposition of chromium and copper
… and a theory proposed for the ability to improve throwing power by the joint use of organic additives and pulsed reverse current. During the course of the research, several improvements were made to the pulse plating unit.Chromium. A study was made of the effect of square wave pulsed current on …
-
Use of ultrasonic agitation in iron group alloy electrodepositions
… employed had a fixed frequency of 13 KHz but the power output from each transducer was variable up to a maximum of 350 watts. The effects of air and ultrasonic agitation on hardness, ductility, tensile strength, composition, structure, surface topography, limiting current density, cathode current …
-
The Effect of Sodium Fluoride on the Bright Plating Range of Chromium
… as the extent of the bright plating range, the throwing power, and other factors, are concerned. Many substitutes for sulphuric acid have been tried as addition agents, with varying degrees of success. To show that sodium fluoride can be used as an addition agent, and that it increases the …
-
A Chromium Plating Bath Containing Sodium Benzenesulfonate Instead of Sulfuric Acid
… investigation and experimentation as far as the throwing power, plating range, and efficiency is concerned. Many addition agents have been tried with different degrees of success. The purpose of this investigation is to improve on the above factors and show that bright deposits can be obtained …
-
Synthesis and characterization of atmospheric pressure chemically vapor deposited aluminum
… process can offer excellent step coverage and throwing power. Corrosion testing revealed that APCVD Al coatings exhibit excellent corrosion resistance. With such correlations, this study offers an environmentally benign alternative to cadmium plating, as well as promises to provide high …
-
ΗΛΕΚΤΡΟΛΥΤΙΚΗ ΒΑΦΗ ΤΟΥ ΑΛΟΥΜΙΝΙΟΥ ΜΕΣΑ ΑΠΟ ΔΙΑΛΥΜΑΤΑ ΘΕΙΙΚΟΥ ΔΙΣΘΕΝΟΥΣ ΚΑΣΣΙΤΕΡΟΥ (ΒΕΛΤΙΩΣΗ ΤΗΣ ΜΕΘΟΔΟΥ ΚΑΙ ΔΙΕΥΡΥΝΣΗ ΤΩΝ ΧΡΩΜΑΤΙΣΜΩΝ)
… ΜΕΝ Η ΒΕΛΤΙΩΣΗ ΤΗΣ ΣΚΕΔΑΣΤΙΚΗΣ ΙΚΑΝΟΤΗΤΑΣ (THROWING POWER) ΚΑΙ ΤΗΣ ΑΝΤΟΧΗΣ ΣΤΗΝ ΟΞΕΙΔΩΣΗ ΤΩΝ ΔΙΑΛΥΜΑΤΩΝ ΠΟΥ ΧΡΗΣΙΜΟΠΟΙΟΥΝΤΑΙ ΚΑΤΑ ΤΗΝ ΗΛΕΚΤΡΟΛΥΤΙΚΗ ΒΑΦΗ ΤΟΥ ΑΛΟΥΜΙΝΙΟΥ, ΑΦΟΥ ΠΡΟΗΓΟΥΜΕΝΩΣ ΠΡΟΗΓΗΘΕΙ ΑΝΟΔΙΚΗ ΟΞΕΙΔΩΣΗ ΤΟΥ ΔΕΙΓΜΑΤΟΣ, ΑΦΕΤΕΡΟΥ ΔΕ Η ΔΙΕΥΡΥΝΣΗ ΤΩΝ ΧΡΩΜΑΤΙΣΜΩΝ. ΟΣΟΝ ΑΦΟΡΑ ΤΟ ΠΡΩΤΟ …
-
Electrochemical Properties of Zn-Based Coatings on Direct Press Hardened Steels
… an electron receptor and limits the macroscale throwing power of Γ-Fe3Zn10.
-
Electrodeposition of copper using additive-containing low metal ion concentration electrolytes for EnFACE applications
… such as grain structure, mechanical strength and throwing power. Therefore, in order to use EnFACE for fabrication of industrially useful products, the effect of additives on the electrochemical behaviour and deposit properties of this process needs to be assessed. In addition, the influence of …
-
Electrodeposition of corrosion resistant zinc alloy coatings
… with increase in current density. The throwing power of the Zn-Ni solution deteriorated as Ni metal bath concentration increased. The Co content of deposits also increased with increase in Co bath concentration and temperature, and decreased with increase in current density. However, …
-
An exploratory investigation of the possibility for electrodepositing aluminum from miscellaneous organic system
… but they indicated that this bath has poor throwing power and it is extremely sensitive to a change in current density. The second series of experiments consisted of solubility tests with aluminum stearate in various organic solvents, and conductivity tests with the system aluminum …
-
Μελέτη της ηλεκτρολυτικής επεξεργασίας του αλουμινίου σε διαλύματα θεϊκού νικελίου με σκοπό τον χρωματισμό και την προστασία του από τη δ...: βελτίωση της μεθόδου με τη χρήση Ν-ετεροκυκλικών ενώσεων και διερεύνηση του μηχανισμού δράσης τους
ΤΑ ΠΙΠΕΡΙΔΙΝΟΚΑΡΒΟΝΙΚΑ ΟΞΕΑ,ΤΑ ΠΥΡΙΔΙΝΟΚΑΡΒΟΝΙΚΑ ΟΞΕΑ ΚΑΘΩΣ ΚΑΙ Η L-ΠΡΟΛΙΝΗ,Η L-ΗΔΡΟΞΥΠΡΟΛΙΝΗ ΚΑΙ ΤΟ L-ΑΖΕΤΙΔΙΝΟ-2-ΚΑΡΒΟΝΙΚΟ ΟΞΥ ΧΡΗΣΙΜΟΠΟΙΗΘΗΚΑΝ ΣΑΝ ΠΡΟΣΘΕΤΑ ΣΤΗΝ ΗΛΕΚΤΡΟΛΥΤΙΚΗ ΒΑΦΗ ΤΟΥ ΑΝΟΔΙΩΜΕΝΟΥ ΑΛΟΥΜΙΝΙΟΥ ΣΕ ΔΙΑΛΥΜΑΤΑ ΘΕΙΙΚΟΥ ΝΙΚΕΛΙΟΥ-ΒΟΡΙΚΟΥ ΟΞΕΟΣ, ΜΕΛΕΤΗΘΗΚΕ Η ΕΠΙΔΡΑΣΗ ΤΟΥΣ ΣΤΗ ΣΚΕΔΑΣΤΙΚΗ …