Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 4569 for “"Thrust"”.
-
The Saltville thrust: investigation of a regional thrust fault in a foreland fold and thrust belt
… are not well understood. The Saltville thrust, a major overthrust in the southern Appalachians, was investigated with respect to deformation mechanics. Thrust termination occurs in the overturned, northwest facing Sinking Creek anticline, at the juncture between the southern and central …
-
Design of Missed Thrust Resilient Trajectories Using Expected Thrust Fraction
Low-thrust propulsion methods, and the order of magnitude reduction in required fuel, is an enabling technology for deep-space exploration. Unfortunately, spacecraft with low-thrust levels require long-duration thrusting arcs, making them susceptible to missed thrust events. This investigation …
-
Vectored thrust control.
Supersonic two-dimensional flow from a nozzle with the exit plane inclined to the central axis of the nozzle will be turned if the exit pressure of the nozzle is not matched to the external pressure. The direction and magnitude of the flow deflection angle and the resulting deflection force is a …
-
Thrust vectoring on an UCAV airplane (thrust vectoring engine model): advanced control system.
… tor, Alenia Aermacchi has been studying a thrust vectored version of that airplane. For this reason, in 2010, Alenia Aermacchi offered a three years PhD funding to the Depart- ment of Aerospace Engineering of Politecnico di Torino. In particular a vane based thrust vectoring system had to …
-
Modeling and flight testing of differential thrust and thrust vectoring on a small UAV
… to the aircraft during nominal, differential thrust, and thrust vectored flight configurations, and verify this modeling through simulation and flight testing experiments. This thesis outlines the modeling process, simulator development, design, and implementation of a propulsion assisted …
-
The Influence of Mechanical Stratigraphy on Thrust-Ramp Nucleation and Propagation of Thrust Faults
Our current understanding of thrust fault kinematics predicts that thrust faults nucleate on low angle, weak surfaces before they propagate upward and forms a higher angle ramp. While this classic kinematic and geometric model serves well in some settings, it does not fully consider the …
-
Design of low-thrust missions to asteroids with analysis of the missed-thrust problem
… and an initial mass in LEO of 289 Mg. For low-thrust sample return missions to the main belt asteroid Kleopatra, Mars and Earth are useful gravity assist bodies, with payload masses of 950-1150 kg possible using a 20 kW solar electric propulsion system. A mission to the Jupiter Trojan asteroids …
-
Minimum-fuel low-thrust Lunar trajectories for a range of initial thrust-to-weight ratios
… Lunar trajectories with a variety of initial thrust-to-weight ratios. All of the trajectories will begin in a 315 km circular low-Earth orbit and will terminate in a 100 km circular low-Lunar orbit. The entire study assumes two-dimensional planar motion of the spacecraft and does not take into …
-
Neotectonics Study Along The Frontal Thrust System Of The Fold-Thrust Belt Of Northwest Himalayas, Pakistan
… tectonic deformation of the Himalayan Frontal Thrust System. The first study focuses on the westernmost segment of the Himalayan frontal thrust in the Manzai Ranges. The geologic landscape shows active tectonic features, i.e., stream deflection, wind, and water gaps associated with geologic …
-
The kanarra fold-thrust system -- The leading edge of the sevier fold-thrust belt, southwest Utah
“The Jurassic to Eocene Sevier fold-thrust belt is the subject of continued scientific curiosity in tectonics, stratigraphy, and industry. Understanding its development in southwest Utah is hindered in part due to the multiple origins proposed for the Kanarra anticline, a major leading edge …
-
Columns under combined bending and thrust
… of beam-columns stressed into plastic range by thrusts and equal end moments producing single curvature bending. Actual deflection curves are plotted for 8x8 WF 31 lb/ft section acted upon by moments and thrusts of different magnitudes. These are used for construction of the end moment vs. end …
-
Finite element modeling of thrust faulting
Finite Element modeling of thrust faulting shows that the faults will propagate upward at very low angles from the leading edge of a regional horizontal decollement surface located at various depths in a homogeneous block of crustal material. The angles are consistent with Mode II crack propagation …
-
Analysis of low-thrust interplanetary missions
… ephemerides is required. In case of high-thrust mission, the well-known pork-chop plots are effective tools to design interplanetary missions, providing a graphical overview of the relationship between the fundamental parameters of the mission design: the launch date, the duration and the …
-
Low-Thrust Assisted Angles-Only Navigation
… spacecraft is experiencing a small continuous thrust such as would be provided by a low-thrust propulsion system. In previous work range observability was shown with impulsive maneuvers. This thesis will expand this work to low-thrust spacecraft and will show how range can be observed under …
-
Low-thrust control of orbital elements
… elements of a spacecraft using continuous low-thrust systems. The method involves the use of a general performance index, which is designed to minimize the difference between the instantaneous orbital elements of a spacecraft and some desired set of orbital elements. Due to the generality of …
Page 1 of 229