Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Thrust Measurement"”.

  1. Thrust measurement of a split-path, valveless pulse detonation engine

    … with such obstacles lower system specific thrust (Isp) and reduce overall system performance. Although fundamental PDE research has been ongoing at NPS for seven years, no dedicated attempt has been made to accurately measure the experimental performance. Fuel-based Isp is a function of the …

    nps Repository record for Thrust measurement of a split-path, valveless pulse detonation engine (opens in a new tab)

  2. The Design, Fabrication, and Calibration of a Micro-Newton Thrust Measurement Stand

    Miniature electric thrusters have been in development for decades for use in space applications such as satellite station keeping and propulsion. The development of these miniature thrusters has created a need to test and measure a number of parameters, including the amount of thrust (force) …

    boise Repository record for The Design, Fabrication, and Calibration of a Micro-Newton Thrust Measurement Stand (opens in a new tab)

  3. Testing of a Magnetically Levitated Rocket Thrust Measurement System Demonstrator for NASA

    Existing thrust measurement systems (TMSs) at NASA Stennis Space Center use strain gauges and flux plates to measure forces produced by a test article. Alignment and calibration can take two weeks or more every time a piece of hardware or test article is changed. Cross axis loading is also …

    vt Repository record for Testing of a Magnetically Levitated Rocket Thrust Measurement System Demonstrator for NASA (opens in a new tab)

  4. Thrust load determination for the high pressure turbo unit of the pebble bed micro model

    … instead of custom-built turbo units. A premature thrust bearing failure occurred on the High Pressure Turbo Unit (HPTU) of the PBMM during a test. Due to the closed Brayton cycle operation of the PBMM, it might have been possible to exert larger thrust loads on the thrust bearing of the HPTU than …

    nwu-za Repository record for Thrust load determination for the high pressure turbo unit of the pebble bed micro model (opens in a new tab)

  5. Method and Simulation of On-Orbit Sub-microthrust Evaluation

    … and imaging missions, finer micro- to sub-micro- thrusters have become an area of high interest. As thrusters are developed and ground-tested, it is necessary to evaluate their thrust performance on-orbit. On-orbit measurements offer actual thrust performance in mission conditions, free from …

    calpoly Repository record for Method and Simulation of On-Orbit Sub-microthrust Evaluation (opens in a new tab)

  6. DESIGN, DEVELOPMENT, AND TESTING OF AN INVERTED PENDULUM THRUST STAND FOR LOW POWER HALL-EFFECT THRUSTERS

    … and testing of a null-type inverted pendulum thrust stand intended to measure the thrust of a low-power Hall-effect thruster. The calibration system and control algorithm are described along with the atmosphere testing conducted prior to testing in vacuum. This thrust stand was tested in …

    mtu Repository record for DESIGN, DEVELOPMENT, AND TESTING OF AN INVERTED PENDULUM THRUST STAND FOR LOW POWER HALL-EFFECT THRUSTERS (opens in a new tab)

  7. Effect of Nozzle Pressure Ratio on Thrust and Flow Behavior in a Supersonic De Laval Nozzle

    … an ideally expanded condition yields optimal thrust, practical propulsion systems rarely operate at this design point due to variations in altitude and engine operating conditions. As a result, nozzles frequently operate in off-design conditions. In overexpanded regime, where the exit pressure …

    embry-riddle Repository record for Effect of Nozzle Pressure Ratio on Thrust and Flow Behavior in a Supersonic De Laval Nozzle (opens in a new tab)

  8. Design and Evaluation of a Propulsion System for Small, Compact, Low-Speed Maneuvering Underwater Vehicles

    … system is demonstrated and assessed via direct thrust measurement experiments and by use of an initial proof-of-concept test vehicle. Experiments are performed to enable the evaluation and modelling of the thrust output of the mechanism as well as the speed capability of a vehicle employing the …

    denver Repository record for Design and Evaluation of a Propulsion System for Small, Compact, Low-Speed Maneuvering Underwater Vehicles (opens in a new tab)

  9. Advanced Techniques for Hall Thruster Research and Development

    Hall thrusters are the most common form of electric propulsion on spacecraft currently in Earth orbit, they offer excellent efficiency, high thrust to power, and have relatively simple power processing units. They have seen significant development since their first commercial flight in 1972, …

    washington Repository record for Advanced Techniques for Hall Thruster Research and Development (opens in a new tab)

  10. Measurement of the thrust generated by a hollow cathode with noble gases

    … are therefore necessary. In particular, the thrust generated by a HC has actually been measured only in one instance, with a device quite different from the one investigated in this thesis. A thrust measurement system has therefore been developed, in order to evaluate for what discharge …

    soton Download PDF for Measurement of the thrust generated by a hollow cathode with noble gases (opens in a new tab)

  11. Modelling and design optimisation of a hollow cathode thruster

    … trend in spacecraft is to have two separate thrusters systems performing different tasks, a main electric propulsion system operating on xenon and a chemical system, usually bipropellants or cold gas. The development of a low power electric propulsion system <br/>operating on xenon to replace …

    soton Download PDF for Modelling and design optimisation of a hollow cathode thruster (opens in a new tab)

  12. Analysis of Helicopter Downwash/Frigate Airwake Interaction Using Statistically Designed Experiments

    … model and traverse mounted powered rotor with thrust measurement. Particle Image Velocimetry (PIV) velocity surveys were used with rotor thrust coefficient measurements at locations of identified interaction to help understand the underlying flow physics. Initially, PIV surveys of the frigate …

    odu Repository record for Analysis of Helicopter Downwash/Frigate Airwake Interaction Using Statistically Designed Experiments (opens in a new tab)

  13. Performance and plume characterization of a laboratory krypton Hall thruster

    Hall thruster research has been in progress at the CSU Electric Propulsion and Plasma Engineering (CEPPE) lab for the past decade, however, a full performance and plasma plume characterization has not been conducted with the laboratory Hall thruster available, which recently was modified to be …

    colostate Repository record for Performance and plume characterization of a laboratory krypton Hall thruster (opens in a new tab)

  14. A Multi-Point Measurement Technique for the Enhancement of Force Measurement with Active Magnetic Bearings (AMB)

    … as support bearings and as load sensing measurement tools. Previous work in the area of AMB force measurement has relied upon basic magnetic equations requiring knowledge of coil currents and air gap lengths. Some researchers have utilized magnetic flux probes to eliminate the need for …

    vt Repository record for A Multi-Point Measurement Technique for the Enhancement of Force Measurement with Active Magnetic Bearings (AMB) (opens in a new tab)

  15. Phase Transform Time Delay Estimation to Counteract Spectral Haystacking Effects in Jet Exhaust Flow Measurements

    … to estimate the traversal time of the signal. Thrust measurement is possible with enough time delay estimates across different portions of the exhaust. This preliminary study did not take the full array of data necessary to measure thrust, but did validate key aspects of the measurement …

    vt Repository record for Phase Transform Time Delay Estimation to Counteract Spectral Haystacking Effects in Jet Exhaust Flow Measurements (opens in a new tab)

  16. An investigation of high speed, thin steel rotor, annular, double sided, linear induction motors

    … In addition, inverters, dynamometers, flux measurement apparatus, speed measurement, thrust measurement and friction measurement apparatus were designed and constructed. The effects on performance of slot harmonics, winding connections, the end effect and the edge effect were measured. …

    ubc Repository record for An investigation of high speed, thin steel rotor, annular, double sided, linear induction motors (opens in a new tab) Download PDF for An investigation of high speed, thin steel rotor, annular, double sided, linear induction motors (opens in a new tab)

  17. Létající robot pro geofyzikální účely

    Tato práce se zabývá výběrem vhodné konfigurace bezpilotního prostředku se svislým startem a přistáním a možností visu. Proto se soustředí na zmapování převážně vrtulníkových koncepcí, zejména těch které se u takovýchto bezpilotních prostředků používají nebo se pro toto použití jeví jako vhodné. …

    brno-tech Repository record for Létající robot pro geofyzikální účely (opens in a new tab)

  18. On Liquid Rotating Detonation Rocket Engines Characterization and Performance

    … with liquid RP-2 and O2 as the reactants where thrust measurements and back-end imaging analysis of the wavespeeds provide insight into the operation and sustenance of the combustion phenomenon occurring inside the engine.

    ucf Repository record for On Liquid Rotating Detonation Rocket Engines Characterization and Performance (opens in a new tab)