Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 104 for “"Thrust force"”.
-
CONSTRAINED-MOTION DRILLING DYNAMOMETER FOR TORQUE AND THRUST FORCE MEASUREMENT
… of a low-cost, table-mounted drilling torque and thrust force dynamometer. A two degree of freedom design, based on constrained-motion flexure-based kinematics is implemented. The drilling torque and thrust force are inferred from displacement measurements using a novel dual-magnet Hall effect …
-
Direct thrust force control of a linear permanent magnet synchronous motor
This thesis is focused on the direct thrust force control (DTFC) of tubular surface-mount linear permanent magnet synchronous motors (PMSM). The linear PMSMs are typically characterized by a low value of stator inductance and a short pole-pitch. Consequently, linear PMSMs exhibit higher ripple in …
-
Data-Driven Modeling of Wind Turbine Structural Dynamics and Its Application to Wind Speed Estimation
… wind speed, an online model-based aerodynamic thrust force estimator is designed and implemented using Kalman filter and recursive least square algorithm. The estimated aerodynamic thrust force is used as an input to a neural network estimator to solve the inverse aerodynamic thrust force …
-
Vibration Assisted Drilling of Aluminum 6061-T6
… exit burr height, a model capable of predicting thrust force accurately is important because higher thrust force produces larger exit burr. Clearly there is a need to develop these models. </p> <p> This thesis presents the development of analytical models for predicting thrust force and exit burr …
-
Characterization and Control of a Saab Seaeye Thruster
… implement semi-autonomous control, precise thrust forces must be elicited from the thrusters. This work discusses a low-level thruster controller that can be used as part of a semi- autonomous guidance, navigation and control system for a ROV. A thruster dynamics model describing the thrust …
-
Experimental Study of Damage and Defect Detection during Drilling of CFRP Composites
… of structural components from carbon fiber reinforced plastic (CFRP) composites. Interrupting the drilling process to inspect or monitor these problems during operation increases the cost of production and is a great economic challenge for industries; therefore, there is a great need for on-line …
-
Computational analysis of the dynamic forces in drive train components of an offshore wind turbines
… attention to structural stability and endurance. Forces on drive train components, such as the bearing system, are not well understood. This work presents the development a model that calculates dynamical forces in drive train components of off-shore wind turbines. The model of a 5MW off-shore …
-
Προσομοίωση της μηχανουργικής κατεργασίας της διάτρησης βασισμένη σε σύστημα CAD-CAM
… pieces, in order to calculate every primitive thrust force component involved with high accuracy. The resultant thrust force produced, is verified by adequate amount of experiments using a number of different tools, speeds and feed rates. The final data derived, consist of a platform for …
-
High Force Density Linear Electromagnetic Actuators for Active Suspension
… electromagnetic actuators that directly generate thrust force are generally heavy and bulky due to low power density of the current state-of-art linear electromagnetic actuator technologies. This thesis is concerned with research, development and optimisation of high thrust force density linear …
-
Modeling and experimental investigations of drilling carbon fiber reinforced composites
… model is proposed to predict the critical thrust force at which delamination starts. The model takes into account the thermo-mechanical loads with considering a mixed-mode of fracture that takes place in the delamination area for unidirectional composites. The proposed model has been …
-
Machinability of polypropylene biocomposites reinforced with natural fibers and biocarbon particles
… affected by the processing method, the reinforcement, and the matrix used in the biocomposite. Therefore, it is necessary to understand the machining behavior of a particular biocomposite. It could thereby help to choose suitable cutting parameters to obtain the desired surface quality …
-
Force modeling in drilling with application to burr minimization
… One approach to minimizing burrs is to lower the thrust force in drilling through suitable modification of the drill geometry such as the use of a step drill. Although prior researchers have analyzed different drill geometries such as step drills and their effect on hole exit burr formation in the …
-
An Experimental Study on Interference Friction Welding Process
… heat and plastic deformation due to lateral force contributes to diffusion bond formed between the two workpieces in relative motion while in contact. There are several advantages that can be attributed to the friction welding processes including faster joining rates, lower heat affected …
-
Advanced modelling for the orthogonal cutting of unidirectional carbon fibre reinforced plastic composites
… cutting of unidirectional carbon fibre reinforced plastic (UD-CFRP) composites. In a meso-scale approach, a new cohesive model was developed to overcome the excessive deformations shown by the generally implemented zero thickness cohesive elements. The smoothed particle hydrodynamics (SPH) …
-
Analysis and Design of an In-line Pump as a Thruster for Swimming Robots
… arms that are well understood, mechanism of thrust generators is more complicated and their performance is unpredictable compared with DC motors. The purpose of this project is to design a thrust generator which is amenable to feedback control. When the feedback signal is the angular velocity …
-
An Improved Method of Cutting Forces Prediction for the Primary Cutting Edges of Twist Drills
… an improved theoretical method to predict thrust and torque of twist drills in high speed drilling. The three existing models and methods are thoroughly studied and evaluated. It has been observed that each method has its own advantages as well as drawbacks and some errors. A fundamental …
-
Numerical study of MEMS-Based vaporizing liquid microthruster for CubeSats
… of the performance of the vaporizing liquid microthruster (VLM) propulsion system of a CubeSat. The development in propulsion systems' miniaturization has generated a proliferation entailing both nano- and microsatellite designs. Consequently, the microelectromechanical systems (MEMS) technology …
-
An experimental and theoretical investigation of the reaming operation
… has revealed that there are three components of force and torque which are developed in a reaming operation. Thrust force and cutting torque which both are constant during a reaming operation are generated as the result of material removal by the chamfer of the reamer. The chamfer section of the …
-
Material characterization leading to predictive drilling tool for carbon fibre reinforced composite material using FEM
Utilizing carbon fiber reinforced polymers (CFRP) in design offers advantages including as mass reduction, increased stiffness, enhanced corrosion resistance, improved sound damping, and vibration absorption. The notable strength-to-weight ratio of CFRP has driven its adoption over traditional …
-
Hydrodynamics of Balistiform swimming in the Picasso Triggerfish, Rhinecanthus aculeatus
… the development of momentum enhancement, a fin-force multiplier that increases swimming efficiency. This study examines the kinematics and energetics of balistiform locomotion employing theoretical models of thrust, power, and efficiency. Thrust and power were calculated and compared with …
Page 1 of 6