Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"Ti-64"”.
-
MACHINABILITY COMPARISON BETWEEN TWO DIFFERENT GRADES OF TITANIUM ALLOYS UNDER DIVERSE TURNING AND COOLING CONDITIONS: Ti-6Al-4V and Ti-5Al-5V-5Mo-3Cr
… often presents a challenge. While useful assumptions can be drawn from materials of similar properties, there will always be unpredictable outcomes. Titanium alloys have been employed in the aerospace industry due to their high mechanical properties and good strength-to-weight ratio. Ti-64 …
-
Relationship between the ultrasonic grain noise and microstructure in two-phase microstructures
<p>The relationship between grain noise and microstructure in two-phase materials has been studied. The grain noise is one of important factors which controls the detectability of small flaws in advanced materials. The grain noise is dictated by various microstructures such as alloying elements, …
-
Microstructural sensitive model for plastic deformation of Ti-6Al-4V
… based model capable of describing the deformation response of additively manufactured Ti-64 and contribute to the current knowledge in cast wrought (C&W) technology under various deformation conditions. The new proposed model was used to predict deformation behaviour, irrespective of the …
-
Influence of specimen geometry on fatigue crack growth rates in cast and forged Ti- and Ni-based alloys
Assuming linear elastic fracture mechanicsl two cracks with the same stress intensity factor will grow with the same rate, regardless of the geometry of the body. However, at GKN Aerospace test results from fatigue crack growth testing of C(T) and Kb specimens made from castings have shown distinct …
-
Characterisation of the high strain rate deformation behaviour of α-β titanium alloys at near-transus temperature
… microstructural and mechanical characterisation of α-β titanium alloys exposed to a range of thermo-mechanical conditions, in particular under-going high rate deformation at elevated temperatures, representative of the Linear Friction Welding (LFW) manufacturing process. Three α-β titanium …
-
SELECTIVE LASER MELTING OF BORON NITRIDE NANOPLATELET-REINFORCED TITANIUM COMPOSITES
Selective laser melting (SLM) is limited by the lack of composite powders available for purchase. This thesis focused on additively manufactured boron nitride nanoplatelet-reinforced titanium composites that maintain the structural integrity of traditional titanium alloys while promoting an …
-
Modeling Fatigue Behavior of 3D Printed Titanium Alloys
… loading and unloading cycles lead to the formation of strain in the material which causes initiation of the crack formation this phenomenon is called fatigue. Fatigue properties are critical for structures subject to cyclic load; hence fatigue analysis is used to predict the life of the …
-
Enhancement of fatigue properties of additively manufactured titanium alloy by advanced laser processing
The demand for lightweight, high-strength and fatigue-resistant materials in aerospace, biomedical and structural engineering has elevated the prominence of titanium (Ti) alloys, especially those fabricated through additive manufacturing (AM). Despite the freedom and material efficiency offered by …
-
Microstructural analysis of TI-6Al-4V components made by electron beam additive manufacturing
Electron Beam Additive Manufacturing (EBAM) is a relatively new additive manufacturing (AM) technology that uses a high-energy electron beam to melt and fuse powders to build full-density parts in a layer by layer fashion. EBAM can fabricate metallic components, particularly, of complex shapes, in …
-
Linear friction welding of Ti-5.3Al-7.7V-0.5Si to Ti-6Al-4V: processing, characterisation and mechanical behaviour
In the development of jet engines, where the reduction of component weight is paramount for improvement in efficiency, the choice of materials and manufacturing processes is critical. Titanium alloys, known for their high specific strength and excellent fatigue resistance, are well-suited materials …
-
Synthesis and Characterization of Advanced Materials
In vivo bone tissue engineering is a highly complex process that involves the diffusion of osteoprogenitor cells throughout the scaffold, requiring that the scaffolds have interconnected pores of ~100 μm in diameter to allow for proper diffusion of oxygen and nutrients. For cell adhesion to occur, …
-
Towards local property assessment of advanced manufactured microstructures: a case study in linear friction welded titanium
… approaches to materials processing, have optimised the structure of additive products and refined the processes for complex joining technologies. However, in doing so they radically change the material structure, often introducing strong local heterogeneity either by design or by …
-
Three Dimensional Modeling of Ti-Al Alloys with Application to Attachment Fatigue
The increasing use of alpha/beta Ti-Al alloys in critical aircraft gas turbine engine and airframe applications necessitates the further development of physically-based constitutive models that account for their complex microdeformation mechanisms. Alpha/beta Ti-Al alloys are dual-phase in nature …
-
Structural Evaluation of Defects in Bolt Hole Threads
Threaded bolted joints are a critical fastening method in aerospace engineering, used to connect structural components under demanding mechanical and thermal conditions. In many of the assemblies manufactured at GKN Aerospace, bolts are installed directly into tapped holes machined into large, …
-
The role of oxygen and nitrogen in titanium alloys for aerospace applications
… oxygen embrittlement and high-temperature oxidation of titanium alloys. This has been accomplished by using Atom Probe Tomography (APT) and Electron Probe Microanalysis (EPMA) to quantify oxygen segregation on the micro and nanoscale, linking changes in composition, crystal orientation and …
-
Methodology for Parameter Determination for Simulation Software
… research aims to present a methodology for optimizing input datasets to increase the accuracy of mathematical models and accelerate their application to engineering problems. To accomplish this goal, this work focused on the application of mathematical models to metal additive manufacturing …
-
Hydrogen Embrittlement in Hexagonal Close Packed (HCP) Alloys with Microstructural Hydrogen Traps
… in hexagonal close packed (HCP) alloys, such as titanium and zirconium, is a life-limiting mechanical degradation phenomenon. Current literature attributes HE in these alloys to the formation and cleavage fracture of hydrides formed due to low hydrogen solubility at relevant temperature. This …
-
Investigation of the High-Speed Finish-Turning of Ti-5Al-5V-5Mo-3Cr Using Novel Mono/Bi-layered PVD-Coated WC Tools
The Ti-5Al-5V-5Mo-3Cr alloy is used in aerospace, biomedical, and military fields due to its outstanding thermomechanical properties. Nevertheless, its higher strength and toughness make it more challenging to machine compared to traditional Ti alloys like Ti-64. Despite increasing demand, there is …
-
Metallurgical and Mechanical Characterization of High Temperature Titanium Alloys Joined by Friction Stir Welding
In the world of joining, riveting and additive manufacturing, weight reduction, and omission of defects (at both macro and micro level) remain of paramount. Therefore, in the wake of ubiquitous fusion welding (FW) and widely accepted approach of riveting using Inconel bolts to resist corrosion at …
-
Multi-Physics Sensing and Real-time Quality Control in Metal Additive Manufacturing
Laser powder bed fusion is one of the most effective ways to achieve metal additive manufacturing. However, this method still suffers from deformation, delamination, dimensional error, and porosities. One of the most significant issues is poor printing accuracy, especially for small features such …
Page 1 of 2