Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Ti-based alloys"”.
-
Design, microstructure and mechanical properties of new Ti-based alloys
… molecular orbital method three new series of TixFe- yTa, Ti-Fe-xNb and Ti-Nb-xFe alloys are designed for the first time. The alloys are then produced by cold crucible levitation technique. The influence of Ta, Fe and Nb contents on the phase transformation, β phase stability and …
-
Microstructure and mechanical properties of new composite structured Ti-based alloys
The demanding structural applications (e.g. aerospace, biomedical, etc.) require new materials with improved mechanical performance. The novel Ti-based dendrite + nano-/ultrafine-structured (Ti-based DNUS) composites exhibit an advantageous combination of high compressive strength (2000 – 2500 MPa) …
-
An Initial Study of Binary and Ternary Ti-based Alloys Manufactured Using Laser Engineered Net Shaping (LENSTM)
In this study an initial assessment of the composition – microstructure – property relationships in binary and ternary Ti – based systems are made possible using LENSTM technology. Laser Engineering Net Shaping (LENSTM), a rapid prototyping, directed laser deposition methodology of additive …
-
Theory-guided bottom-up design of low-rigidity Ti-based alloys (ab initio and molecular dynamics simulations)
This thesis investigates the structural, electronic and mechanical properties of Ti-basedalloys aiming in understanding the electronic origin of low-rigidity materials suitable asmetallic implants. This necessity is originated from the currently used Ti-6Al-4Vmetallic implants that consist of …
-
Thermophysical and Thermochemical Property Measurement and Prediction of Liquid Metal Titanium Alloys with Applications in Additive Manufacturing
… property data for liquid metals and alloys are important for simulation of laser-based 3D printing processes. To understand and better control such additive manufacturing processes, knowledge of density, viscosity, and surface tension of liquid metals and alloys versus composition and …
-
Mechanically Driven Reconstruction of Materials at Sliding Interfaces to Control Wear
… having efficient jet engines and internal combustion engines necessitates utilizing lightweight alloys such as Al, Ti, and Mg-based alloys. Because of their remarkable strength/weight ratio, these alloys have received a lot of attention. Nonetheless, they have very poor tribological behavior, …
-
Welding Parameters, Distortion and Mechanical Properties of AA7075 Lap Joints in SSFSW
Friction Stir Welding (FSW), first invented by The Welding Institute of UK (TWI) in 1991, is a solid state welding process which was initially applied to welding Aluminum Alloy. FSW has wide application in industrial sectors. Stationary shoulder friction stir welding (SSFSW) was first developed to …
-
High Temperature Sliding Wear Behavior and Mechanisms of Cold-Sprayed Ti and Ti-TiC Composites
Ti and Ti-based alloys are used in many aerospace and automotive components due to their high strength-to-weight ratio and corrosion resistance. However, room and elevated temperature wear resistance remain an issue, thus requiring some form of secondary hard phase, e.g., refractory carbides and …
-
Computational Analysis and Screening of Nitrogen Conversion Reactions over Metal Oxide Surfaces
… materials for nitrogen conversion applications, such as decentralized ammonia production and nutrient recovery. Since ammonia from nitrogen fixation is primarily produced through the Haber-Bosch process, we explore catalyst design for less energy-intensive and lower carbon footprint …
-
Wear, Friction and High Shear Strain Deformation of Metallic Glasses
… metallic glasses (BMGs) namely Zr41.2Cu12.5Ni10Ti13.8Be22.5 (LM 1), Zr57Cu15.4Ni12.6Al10Nb5 (LM 106), Ni60Pd20P17B3 (Ni-BMG), and Pt57.5Cu14.7Ni5.3P22.5 (Pt-BMG) were compared. Shear band formation on the edges of the scratch groove with spallation was found to be the primary failure mechanism …
-
Synthesis and Characterization of Calcium Phosphate Powders for Biomedical Applications by Plasma Spray Coating
… mainly focus on the synthesis and characterization of calcium phosphate powders for plasma spray coating. The preparation of high temperature phase stabilized βTCP and HA/βTCP powders for plasma spray coating applications has been the topic of investigation. Nowadays plasma sprayed coatings are …
-
Fabrication of Metal/Oxide Nanostructures by Anodization Processes for Biosensor, Drug Delivery and Supercapacitor Applications
This dissertation proposed to initiate the research into the fabrication of metal/oxide nanostructures by anodization process for biosensor, drug delivery and supercapacitor applications by producing different nanostructures which lead to the potential for various applications. This study focuses …
-
In Situ Alloying of Titanium via Laser Powder Bed Fusion
Laser powder bed fusion is a leading additive manufacturing technique capable of producing complex, customised titanium components. However, its broader adoption is constrained by limited commercial alloy options, the high cost of pre-alloyed powders, and pronounced anisotropy arising from coarse …
-
Investigation of the mechanical properties and phase stability of Ti-transition metal alloys using first-principle calculations
The ternary Ti-X-B (X=Mo/V/Fe/Nb) alloy system has three distinct material classes depending on the fraction of monoboride phase in the Ti-matrix, which makes them useful for broad applications such as aerospace and biomedical fields. Based on the design principle of searching for Ti-monoboride …
-
Structural properties, deformation behavior and thermal stability of martensitic Ti-Nb alloys
Ti-Nb alloys are characterized by a diverse metallurgy which allows obtaining a wide palette of microstructural configurations and physical properties via careful selection of chemical composition, heat treatment and mechanical processing routes. The present work aims to expand the current state of …
-
Pinless Friction Stir Spot Welding of Ti-6Al-4V Alloy for Aerospace Application
<p>Friction Stir Spot Welding (FSSW) is a newly developed solid-state joining technique with considerable merits over conventional spot-welding techniques, such as relatively simple procedure and excellent welding properties. It has been successfully implemented for the joining of light-weight …
-
TOWARDS THE PHOTOCATALYTIC PRODUCTION OF SOLAR FUELS - NANOSTRUCTURED TITANIUM DIOXIDE FOR PHOTOCATALYSIS & PHOTO-ELECTROCHEMISTRY
… given during the last decades to find new alternative photocatalytic materials, titanium dioxide (TiO2) still represents the most widely employed semiconductor for photocatalytic applications, being photoactive, cheap, easily available, non-toxic, inert and, most of all, chemically stable. …
-
Critical stresses for twinning, slip and transformation in shape memory alloys: modeling and experiments
There are four important parameters-(i) transformation stress (ii) twinning stress (iii) austenite slip stress and (iv) martensite slip stress that govern shape memory and superelastic behavior in shape memory alloys (SMAs). However, it is a tremendous experimental effort to determine these …
-
Microstructural and nanomechanical characterisation of Ni-Ti(-Cu) shape memory alloy thin films for tribology
Protective and functional coatings have been undergoing development for decades and further improvement to their mechanical and tribological properties are more and more challenging. Nowadays most research is aimed at improving the tribological behaviour of hard and functional coatings through the …
-
Selective laser melting of high-performance titanium alloys: process, microstructure and properties
Selective laser melting (SLM) of titanium (Ti) alloys has increasingly been used in aerospace and automotive applications. However, current studies have been mainly focused on SLM of α and α+β Ti alloys, especially the widely commercialized Ti-6Al-4V. These alloys possess a relatively low hardness, …
Page 1 of 2