Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Ti2O3"”.

  1. Effect of titanium pick-up on mould flux viscosity in continuous casting of titanium-stabilised stainless steel

    … of the fluxes with the absorption of Ti02, Ti2O3 and Ti3O5 in the range of 2 to 10 wt%, for temperatures from 1400°C to 1200°C. The effect of Ti02 and Ti2O3 has been tested with the mould flux of the austenitic steel at a basicity of 1.2 to match the basicity which arises during casting. For …

    pretoria Repository record for Effect of titanium pick-up on mould flux viscosity in continuous casting of titanium-stabilised stainless steel (opens in a new tab)

  2. Imperfections within Ti₂O₃ and TiO₂ phases in the titanium-oxygen system

    “The hexagonal-rhombohedral Ti2O3 phase in the Ti-O system extends from 32.5 to 34.5% oxygen b.w., with the exact composition of Ti2O3 nearly in the middle of the phase. Seven samples of different composition within that phase were made, and the lattice constants (a and c) and the density of each …

    must-thes Repository record for Imperfections within Ti₂O₃ and TiO₂ phases in the titanium-oxygen system (opens in a new tab)

  3. Morphological analysis and post processing of platinum-titanium nanoparticles

    … oxidised with mostly in TiO2 and small amount of Ti2O3. The Pt core consist of pure Pt as well as a layer of oxide Pt. Thermally heating the nanoparticles to 600 oC resulted in reduction of Pt core to fully metallic Pt state and also increased the Ti2O3 to TiO2 ratio of the Ti shell. The reduction …

    birmingham Download PDF for Morphological analysis and post processing of platinum-titanium nanoparticles (opens in a new tab)

  4. Chlorination of Titanium Oxycarbide and Oxycarbonitride

    … rutile, Ti(O,C) or Ti(O,C,N), metallic iron and Ti2O3 were chlorinated. The rate and extent of chlorination of titanium increased with increasing carbon to TiO2 ratio. Chlorination of Ti2O3 was slow relative to Ti(O,C) or Ti(O,C,N) and iron; chlorination of impurity oxides such as MgO, SiO2 and …

    unsw Repository record for Chlorination of Titanium Oxycarbide and Oxycarbonitride (opens in a new tab)

  5. Ion Impact Chemistry in the System Ti-O

    … under ion impact and its identification as Ti2O3 and suggest a technique for producing lower oxides of transition metal oxides that have a semiconductor to metal transition of technological interest.</p>

    mcmaster Repository record for Ion Impact Chemistry in the System Ti-O (opens in a new tab)

  6. Exploring temporal dynamics of TiOx-based memristors for optimised robustness in neuromorphic computing

    … a mixed-phase material consisting of TiO2 and Ti2O3. By altering the oxygen flow rate, the relative ratio of TiO2 and Ti2O3 in the deposited thin film for memristors can be modified. These TiO2-rich and TiO2-deficient phases were investigated using X-ray photoelectron spectroscopy (XPS) …

    soton Repository record for Exploring temporal dynamics of TiOx-based memristors for optimised robustness in neuromorphic computing (opens in a new tab) Download PDF for Exploring temporal dynamics of TiOx-based memristors for optimised robustness in neuromorphic computing (opens in a new tab)

  7. Sub-Stoichiometric Titania as a Viable Support for Pt Electrodes

    … the synthesis, characterization, and use of Ti2O3 and Ti3O5 supports as a stable support for Pt-based electrocatalyst use in several prominent fuel cell reactions.

    gatech Repository record for Sub-Stoichiometric Titania as a Viable Support for Pt Electrodes (opens in a new tab)

  8. LEED and STM studies of rutile (1x1) and (1x2) TiO2(110).

    … Three proposed (1x2) added row models, Ti2O, Ti2O3 and Ti3O6, are compared to the observed adsorption behaviors. Ti2O added row model is found consistent with such adsorption behaviors and models of TMAA adsorptions are proposed.

    baylor Repository record for LEED and STM studies of rutile (1x1) and (1x2) TiO2(110). (opens in a new tab)

  9. Epitaxial oxide thin films

    … chapters. Comparative analysis between Nb2O3 and Ti2O3 constitutes pivotal sections.</p> <p>Triangles and pinwheels are common structures in 2D materials. Nb and Ti oxides can form independently-standing triangles, and Nb/Ti/V oxides can generate both free and embedded pinwheel monolayers. A …

    oxford Repository record for Epitaxial oxide thin films (opens in a new tab)

  10. Carbothermal synthesis of titanium oxycarbide

    … sequence: TiO2 → Ti5O9 → Ti4O7 → Ti3O5 → Ti2O3 → (TiO-TiC) solid solution. • Carbothermal reduction of ilmenite concentrates proceeded in two main stages. In the first stage pseudorutile and ilmenite were reduced to metallic iron and titania. Second stage involved the reduction of titania …

    unsw Repository record for Carbothermal synthesis of titanium oxycarbide (opens in a new tab)

  11. Characterization and Evaluation of Submicron Femtosecond Laser-Induced Periodic Surface Structures on Titanium to Improve Osseointegration of Dental and Orthopaedic Implants

    … that the unique electronic structures of Ti2O3 and TiO2, which resulted in hydrophilic and hydrophobic hydration structures, respectively, played a crucial role in the observed wettability transition. This study demonstrates the prospect of using femtosecond laser-induced periodic surface …

    ottawa-retro Repository record for Characterization and Evaluation of Submicron Femtosecond Laser-Induced Periodic Surface Structures on Titanium to Improve Osseointegration of Dental and Orthopaedic Implants (opens in a new tab)

  12. Processing of Electroceramic Materials for Advanced Applications

    … Tři směsi práškových prekurzorů (Eu2O3 s Ti2O3 nebo TiO2 – rutil či anatas) byly homogenizovány mletím v planetovém mlýnu a formovány izostatickým tlakem 300 MPa. Vzniklé keramické polotovary diskového tvaru byly slinovány konvenčními metodami v redukčních atmosférách (Ar + 7 % H2 nebo …

    brno-tech Repository record for Processing of Electroceramic Materials for Advanced Applications (opens in a new tab)

  13. A study of the dissolution of titanium-oxygen-nitrogen alloys in hydrofluoric acid

    … from ammonia produced in the dissolution and Ti2O3 known to be present in the metal. The dissolution process is believed to be controlled by the diffusion of the corrosive elements through these films. As the amount of nitrogen in the sample is increased the diffusion process becomes more …

    must-thes Repository record for A study of the dissolution of titanium-oxygen-nitrogen alloys in hydrofluoric acid (opens in a new tab)

  14. Surfaces and Epitaxial Films of Corundum-Structured Mixed Metal Oxides.

    … In this work, solid solutions of V2O3 and Ti2O3 are studied. VTiO3, has been synthesized in a corundum – like structure by epitaxial growth on an isostructural α-Al2O3 substrate. Section I offers a review of corundum like transition metal oxides and their surface properties and motivations …

    usf Repository record for Surfaces and Epitaxial Films of Corundum-Structured Mixed Metal Oxides. (opens in a new tab)

  15. Sulphide Stress Cracking in X80 Pipeline Steel Welds

    … ferrite corresponds to an ideal stoichiometry of Ti2O3. Next, SSC tests are performed in accordance with NACE MR0175/ISO 15156 (using a test solution) based on the (3 and 4 points bending method) on this material with varying intragranular ferrite volume fraction. These results confirm that weld …

    waterloo Repository record for Sulphide Stress Cracking in X80 Pipeline Steel Welds (opens in a new tab)