Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 97 for “"TiB2"”.
-
Acid Leaching of SHS Produced MgO/TiB2
… the acid leaching of SHS produced MgO/TiB2 and a stoichiometric mixture of commercial MgO and TiB₂ powders. Leaching was conducted at 90° C, 60° C, and 30° C at pH levels of 4.0, 2.5, and 1.0 by introduction of concentrated aliquots of HNO₃. This method maintains a minimum pH target …
-
Nanostructuring of Cu-TiB2 induced by ion irradiation
… involving the precipitation of compounds. The Cu-TiB2 alloy system was selected and microstructural evolutions induced by 1.8 MeV Kr ion irradiation with varying fluence and wide range of temperatures were investigated. An additional objective was to identify the mode of formation of these …
-
SYNTHESIS AND MECHANICAL PROPERTIES OF IN-SITU AL-TIB2 COMPOSITE
Of the Al-base MMCs, Al-TiB2 composite has a promising potential for advanced applications. Being microstructurally superior, it can withstand relatively high temperature strength and fatigue. The exothermic formation of TiB2 in AI and the high thermal stability of TiB2 permit the suitability of …
-
Microstructure-Mechanical Properties Relations in Pressureless Sintered SiC-TiB2 Composite Ceramics
… toughness and flexural strength) of the SiC-TiB2 composite were studied. Pressureless sintering experiments were carried out on samples containing 0 to 50 vol % of TiB2 created by an in-situ reaction between TiO2 and C: 2TiO2 + B4C + 3C 2TiB2 + 4CO Al2O3 and Y2O3 were used as sintering …
-
Vysokoteplotně odolné kovo-keramické kompozity na bázi TiB2 pro řezné nástroje
… odolného kovo-keramického kompozitu na bázi TiB2. Pojivo tvrdé keramické fáze tvoří slitina NiW, která byla připravena mechanickým legováním v planetovém kulovém mlýnu. První část práce se zabývá optimalizací mísení obou složek v kulovém mlýnu. Zde byla navržena a ověřena metodika přípravy …
-
ANÁLISIS DE RECUBRIMIENTOS DE Ti REFORZADOS CON TiB2 MEDIANTE TÉCNICAS DE RECUBRIMIENTO LÁSER
… estudiado la formación de recubrimientos de Ti y TiB2 sobre sustrato de Ti mediante la técnica de Laser Cladding (recubrimiento láser) coaxial usando un láser de Tipo Nd YAG de 1 kW de tipo continuo, analizando los efectos que tienen sobre el recubrimiento, los porcentajes de aleación del material …
-
Ultrasound assisted low-temperature synthesis of TiB2 and Al3Ti particulates in molten aluminum
In situ formed TiB2 and Al3Ti are two typical representatives of ceramic and intermetallic reinforcements in the in situ particulate reinforced Al composites. TiB2 particulates can be synthesized in molten Al via the mixed-salts reaction by adding mixed K2TiF6 and KBF4 salts into the Al melt at …
-
Effect of Processing Parameters on Bond Strength and Effective Plasticity in Al2O3-TiB2 Composites
Alumina-titanium diboride (Al2O3-TiB2) composites have high temperature, wear, and impact resistance that could be useful in high performance applications. Determining the effect of processing parameters on relative bond strength and effective plasticity may contribute to optimization and …
-
Physikalische Chemie der Laser-Material-Wechselwirkung mit Ba-Al- Borosilikatglas, AlN, SiC, SiC-TiC-TiB2
… und eine Kompositverbindung aus SiC-TiC-TiB2) wurden untersucht. Die chemischen Veränderungen wurden mithilfe von Oberflächen-Analyseverfahren - wie XPS, Nanoindenter, ESR, µ-Raman, EDX, XRD - im Vergleich von unbehandelter und Laser-behandelter Stelle detektiert. Bei …
-
High-temperature interactions of molten Ti-Al, Ni-Al and Ni-B alloys with TiB2 ceramic
… Al und Ti-Al, Ni-Al und Ni-B Schmelzen mit der TiB2 Ultrahochtemperaturkeramik. Die über die Methode des liegenden Tropfens hergestellten Metall/Keramik Verbunde werden hauptsächlich mittels Rasterelektronenmikroskopie gekoppelt mit energiedispersiver Röntgenspektroskopie sowie Röntgenbeugung …
-
Processing-Structure-Property Relationships of Spark Plasma Sintered Boron Carbide and Titanium Diboride Ceramic Composites
… boron carbide (B4C) and B4C-titanium diboride (TiB2) ceramic composites. SPS allowed for consolidation of both B4C and B4C-TiB2 composites without sintering additives, residual phases, e.g., graphite, and excessive grain growth due to long sintering times. A selection of composite compositions …
-
Investigating Phenotypic Changes in Response to Drug Treatments in Epithelial Ovarian Cancer Using a Novel Si-TiB2 Micropatterned Substrate
… fabricated using photolithography to deposit TiB2 micropatterns onto a Si wafer to study the response of EOC to epigenetic and chemotherapeutic drugs. Previous work has validated that the Si-TiB2 substrate enables selective deposition of growth factors and self-assembly of cells onto the TiB2 …
-
Effect of titanium diboride particle size on al-alloy properties
… studies which investigate aluminium alloys and TiB2 additions focus on varying the quantities of material added to the alloy. This thesis attempts to address the lack of information regarding to what effect the particle size distribution of the TiB2 additions has on an A205 alloy. To do this the …
-
Influência da adição do inoculante TiB2 e da taxa de resfriamento na microestrutura e propriedades mecânicas da liga Zamac 5
… as propriedades mecânicas destas ligas usando TiB2. Este trabalho buscou determinar a influência da adição do inoculante TiB2, sobre a microestrutura e propriedades mecânicas da liga Zamac 5, vazada em um molde de ferro fundido, por gravidade. Também buscou avaliar o efeito da taxa de …
-
Processing and Characterization of Mg Matrix Composites Reinforced with TiC and TiB2 Phases using an In-situ Reactive Infiltration Technique
… composite reinforced with a network of TiC and TiB2 compounds via an in-situ reactive infiltration technique. In this process, the ceramic reinforcement phases, TiC and TiB2, were synthesized in-situ from the starting powders of Ti and B4C without any addition of a third metal powder such as Al. …
-
Development of an Advanced Composite Material Consisting of Iron Matrix Reinforced with Ultra High Temperature Ceramic Particulate (TiB2) with Optimum Properties
… samples with different volume fraction of TiB2 were fabricated and were subjected to different mechanical tests. The results indicated improving in mechanical properties of Fe-TiB2 composites by increasing the volume fraction of TiB2 up to 20 vol%. More TiB2 particles didn’t improve the …
-
SYNTHESIS, PROCESSING, AND CHARACTERIZATION OF TITANIUM CARBIDE AND TITANIUM DIBORIDE BASED MATERIALS FOR STRUCTURAL AND ELECTRONIC APPLICATION
… of titanium carbide (TiC) and titanium diboride (TiB2) based materials for structural and electronic application. A series of TiB2 and TiC-TiB2 powders was prepared through a novel carbon coated precursors method. Reaction process, phase evolution, and microstructures were analyzed and …
-
Synthesis And Characterization Of Max Ceramics (MAXCERs)
… significantly with the Ti3SiC2 matrix to form TiB2. Detailed tribological studies showed that Ti3SiC2-1wt%Ni (baseline) samples showed dual type tribological behavior where the friction coefficient (Õ© was low (~0.2) during stage 1, thereafter Õ increased sharply and transitioned into stage 2 …
Page 1 of 5