Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 53 for “"Time Temperature Superposition Principle"”.

  1. Long-term creep modeling of wood using time temperature superposition principle

    … were developed from short-term data using the time temperature superposition principle (TTSP) for kiln-dried southern pine loaded in compression parallel-to-grain and exposed to constant environmental conditions (~70°F, ~9%EMC). Short-term accelerated creep (17 hour) and recovery (35 hour) data …

    vt Repository record for Long-term creep modeling of wood using time temperature superposition principle (opens in a new tab)

  2. Development of tension and compression creep models for wood using the time-temperature superposition principle

    … for wood in tension and compression using the Time-Temperature Superposition Principle (TTSP). The principle states that the long-term response of a polymer at lower temperature is equivalent to the short-term response at a higher temperature. Accelerated creep tests were conducted in tension …

    vt Repository record for Development of tension and compression creep models for wood using the time-temperature superposition principle (opens in a new tab)

  3. The nonlinear viscoelastic behavior of adhesives and chopped fiber composites

    … procedures of Schapery in conjunction with the time-temperature superposition principle to obtain a time-stress-temperature surface to define failure.

    vt Repository record for The nonlinear viscoelastic behavior of adhesives and chopped fiber composites (opens in a new tab)

  4. Compression creep of a pultruded E-glass/polyester composite at elevated service temperatures

    … composite under sustained loads at elevated temperatures in the range of those that might be seen in service. This investigation involved compression creep tests of material coupons performed at a constant stress level of 33% of ultimate strength and three temperatures levels; 23.3°C (74°F), …

    gatech Repository record for Compression creep of a pultruded E-glass/polyester composite at elevated service temperatures (opens in a new tab)

  5. The Effect of Viscoelasticity on the Life Expectancy of Light Composite Aircraft

    … characterization of the epoxy matrix using the time-temperature superposition principle. The results were then applied to the spar to determine its long term response using the Classical Lamination Theory applied to complex geometries. Failure was determined based on the Tsai-Hill and maximum …

    carleton Repository record for The Effect of Viscoelasticity on the Life Expectancy of Light Composite Aircraft (opens in a new tab)

  6. Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates

    Adhesively bonded structures exhibit time dependent behavior when subjected to constant load (creep). In this investigation, long-term creep behavior of adhesively bonded aluminum and carbon fiber composite beams under flexural loading was investigated. Three point bending test was selected because …

    wayne-thes Repository record for Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates (opens in a new tab)

  7. Understanding the effect of nanofillers on the properties of polypropylene and glass fiber/polypropylene multiscale composites

    … between the tensile modulus, glass transition temperature and the amount of constrained phase, as assessed through tensile and DMA analyses, revealed the presence of a secondary reinforcing mechanisms, which, concurrently to the primary stiffening effect of the high modulus filler, contributes …

    trento Repository record for Understanding the effect of nanofillers on the properties of polypropylene and glass fiber/polypropylene multiscale composites (opens in a new tab)

  8. Rheological characterization of fumed silica lubricating greases

    … usually influenced by the changes in environment temperature, studying the effects of temperature on the rheological properties of grease are important. In this study, different rheological measurements and visualization techniques, previously developed to study a wide range of materials, have …

    ubc Repository record for Rheological characterization of fumed silica lubricating greases (opens in a new tab) Download PDF for Rheological characterization of fumed silica lubricating greases (opens in a new tab)

  9. Viscoelastic characterization of angle ply advanced composites

    Time dependent properties of angle ply laminated Boron/Epoxy and Graphite/Epoxy fiber controlled composites were investigated. The main objective of this study was to develop a technique to establish interconversion of different test results using appropriate viscoelastic theory to formulate an …

    vt Repository record for Viscoelastic characterization of angle ply advanced composites (opens in a new tab)

  10. The effect of chain extender on the molecular weight and hydrolytic degradation of poly(lactic acid)

    … Effects of the Cex content and the residence time on the molecular weight were reviewed using melt blending and compression molding. A response surface methodology was applied to design the experiments and estimate the optimal conditions for obtaining the maximum weight average and number …

    msu Repository record for The effect of chain extender on the molecular weight and hydrolytic degradation of poly(lactic acid) (opens in a new tab)

  11. Analysis and Modeling of the Mechanical Durability of Proton Exchange Membranes Using Pressure-Loaded Blister Tests

    … of Gore-Select® series 57 over a range of times, temperatures, and loading histories. Ramped pressure tests are used with a linear viscoelastic analog to Hencky's classical solution for a pressurized circular membrane to estimate biaxial burst strength values. Biaxial strength master curves …

    vt Repository record for Analysis and Modeling of the Mechanical Durability of Proton Exchange Membranes Using Pressure-Loaded Blister Tests (opens in a new tab)

  12. Design of Cold-In-Place Recycling using Superpave gyratory compactor

    … master curves were developed for by using time-temperature superposition principle. Furthermore, the rutting resistance of all the CIR mixtures were also evaluated in term of the flow number.

    unr Repository record for Design of Cold-In-Place Recycling using Superpave gyratory compactor (opens in a new tab)

  13. The time-temperature behavior of graphite epoxy laminates

    An in-depth study on the time-temperature behavior of epoxy based continuous and elastic fiber reinforced composite materials and the feasibility of using the time-temperature analogy as an accelerated characterization method to predict the long-term behavior are presented. This is a two-pronged …

    vt Repository record for The time-temperature behavior of graphite epoxy laminates (opens in a new tab)

  14. Modeling the High Strain Rate Tensile Response and Shear Failure of Thermoplastic Composites

    … from 10^-4/s to 10^-1/s and shifted using the time-Temperature Superposition Principle (tTSP) to strain rates of 10^-4/s to 10^6/s. Other fiber properties are obtained from the same tests, but are assumed to be deterministic. Matrix properties are also assumed to be deterministic and are …

    vt Repository record for Modeling the High Strain Rate Tensile Response and Shear Failure of Thermoplastic Composites (opens in a new tab)

  15. Network-level Pavement Evaluation Utilizing Traffic Speed Deflectometer

    … survey works. This study proposed an effective temperature correction method to achieve the speed and temperature correction of TSD deflections simultaneously based on the time-temperature superposition principle. To match the existing FWD-based pavement structure number (SN) records, an …

    utk-theses Repository record for Network-level Pavement Evaluation Utilizing Traffic Speed Deflectometer (opens in a new tab)

  16. Influence of Nonlinear Multiaxial Matrix Viscoelasticity on Piezoresistivity of Carbon Nanotube Polymer Composites

    … However, the polymer matrix introduces time- and temperature-dependency into the mechanical behavior, known as viscoelasticity, and thus affects the relationship between deformation and electrical conductivity over time. Although piezoresistivity and polymer viscoelasticity have been …

    ucf Repository record for Influence of Nonlinear Multiaxial Matrix Viscoelasticity on Piezoresistivity of Carbon Nanotube Polymer Composites (opens in a new tab)

  17. The Rheology Of Unfilled And Carbon Black Loaded Elastomers

    … over a range of amplitudes, frequencies, and temperatures. Both materials are found to remain within the linear viscoelastic region for temperatures greater than about -10°c, to obey the time-temperature superposition principle, and to have identical shift factors. Dynamic moduli over a …

    plymouth Repository record for The Rheology Of Unfilled And Carbon Black Loaded Elastomers (opens in a new tab)

  18. Durability of GFRP Composites under Harsh Environments: Effect of pH and Temperature

    … data from naturally aged samples. Following the time-temperature superposition principle, the mechanical response in the field in a span of time of 75 to 100 years can be extrapolated to obtain the long-term degradation curves and strength reduction factors for design purposes.;In this work, a …

    wvu Repository record for Durability of GFRP Composites under Harsh Environments: Effect of pH and Temperature (opens in a new tab)

  19. Thermoviscoelastic characterization and predictions of Kevlar/epoxy composite laminates

    … ([0]₈, [10]₈, and [90]₁₆) lamina specimens. The Time-Temperature-Superposition-Principle (TTSP) was used successfully to accelerate the characterization process. A nonlinear constitutive model was developed to describe the stress dependent viscoelastic response for each of the material …

    vt Repository record for Thermoviscoelastic characterization and predictions of Kevlar/epoxy composite laminates (opens in a new tab)

  20. Thermo-mechanical properties of cross-linked epoxy based systems: A molecular simulation study

    … CNTs cause a depression in the glass transition temperature (Tg) of nearly ~ 66 K in the nanocomposite compared to the neat polymer, and an enhanced compressibility in the interphase region. As a repercussion of this higher compressibility, the filler-induced reinforcement is negatively affected; …

    ttu Repository record for Thermo-mechanical properties of cross-linked epoxy based systems: A molecular simulation study (opens in a new tab)

Page 1 of 3