Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 256 for “"Time to Failure"”.
-
Time to Failure Prognosis of a Gas Turbine Engine Using Predictive Analytics
… of Things (IIoT), the focus has shifted onto optimal utilization of the equipment. Reduction in the installation costs of sensors helped companies to install them on their key equipment. The live data from the sensors can now be utilized to monitor the health of the machines. This thesis …
-
Determination of Multi-Mode Component Failure and Time-To-Failure with Machine Learning and Deep Learning
… learning and machine learning approach for both failure mode classification and time-to-failure prediction is proposed in this dissertation, with a focus on a multi-mode failure regime where the state of health of components can vary. To validate the potential performance of the proposed …
-
Incorporating Components’ Mean Time To Failure in the Design of a New Family of Reliable and Fault-Tolerant Multilevel Inverters
Renewable energy systems, particularly photovoltaic systems, increasingly use multilevel inverters due to their lower voltage stress on switches, reduced harmonic components at the output, and higher efficiency than traditional two-level converters. However, the high number of switching devices in …
-
Transcranial Direct Current Stimulation of the Dorsolateral Prefrontal Cortex Does Not Improve Handgrip Time-to-Failure or Alter Central or Peripheral Hemodynamics
Age-related deviations to the neuromuscular system negatively impact motor function and performance. Transcranial direct current stimulation (tDCS) has been linked to improvements in the neuromuscular system. The purpose of this study was to determine if tDCS delivered to the dorsolateral …
-
Modeling and simulation of electrical overstress failures in input/output protection devices of integrated circuits
It is proposed in this thesis that a measure to determine the electrical overstress (EOS) hardness of integrated circuits with respect to EOS/electrostatic discharge (ESD) can be measured in terms of the power vs. time-to-failure relationship (power profile) and the current vs. time-to-failure …
-
Reliability and availability analysis of three-state device systems.
… of three-state device systems with common-cause failures. The effect of common-cause failures on different systems is discussed. Different configurations are compared in order to obtain higher standby system reliability. Mathematical expressions are developed for the system reliability, the mean …
-
Assessing of performance of stormwater control measures under varying maintenance regimes
Stormwater control measures (SCMs) are being installed worldwide to curb urbanization impacts such as flooding, stream degradation, nutrient pollution, and contaminant loading in receiving water bodies. Regular inspection and maintenance are important to ensure long term effective performance of …
-
Life testing in controlled environmental conditions
… under environmental stresses with respect to the time of trouble free operation. Specifically, it is necessary to estimate the probability of failure prior to a given time. This is done by utilizing a distribution of time to failure which appears reasonable, and which is specified by the …
-
Common cause failure analysis of redundant systems.
… redundant systems (with common-cause failures) such as parallel, k-out-of-n and standby with identical and non-identical units. Formulas for steady state system availability, system reliability and system mean time to failure are developed. The variation of steady state system …
-
Stochastic analysis of robot-safety systems with common-cause failures
… types of robot-safety systems with common-cause failures. The system failure rates and the partially failed system repair rates are assumed constant, and the failed system repair time is assumed arbitrarily distributed. Markov and the supplementary variable methods were used to perform …
-
Random vibration response statistics for fatigue analysis of nonlinear structures
… methods are developed for determining fatigue time to failure for nonlinear structures when subjected to random loading. The change in the response, as structures progress from a linear regime to a large amplitude nonlinear regime, is studied in both the time and frequency domains. The analyses …
-
Fatigue Damage Accumulation Due to Complex Random Vibration Environments: Application to Single-Axis and Multi-Axis Vibration
… combination of experiments and modeling are used to address the vibration durability of structures subjected to different random vibration environments. Presented in this work are a set of experimental data comparing the rate of change of the first natural frequency and the measured time to …
-
The analysis of redundant reliability systems with common-cause failures.
… (or $n, m, k$) type redundant systems subject to a combination of common-cause failures and independent failures are presented. The global goal was to evaluate the impacts of the standby activation policy and the system repair times on such relevant system performance indices as the …
-
Tertiary Creep Damage Modeling Of A Transversely Isotropic Ni-based Superalloy
… technique for high temperature components due to drives in the gas turbine industry for increased combustion chamber exit pressures, temperature, and the use of anisotropic materials such as metal matrix composites and directionally-solidified (DS) Ni-base superalloys. Typically, isotropic …
-
The use of degredation measures in assessing reliability
<p>With today's high technology, traditional life tests for highly reliable products often result in few or even no failures. This makes it difficult to assess product reliability. For some products, degradation measures taken over time are useful for reliability assessment. By defining product …
-
Stochastic analysis of human-machine systems
This study presents a stochastic analysis of three-state device systems subjected to critical human errors and common-cause failures. The systems analysed incorporate elements of commonly used redundant configurations such as parallel, series, k-out-of-n and standby. For the systems that are …
-
Electrothermal Simulation and Temperature-Sensitive Reliability Diagnosis for CMOS VLSI Circuits
ILLIADS-T has been successfully applied to the electromigration (EM) reliability diagnosis and timing analysis. By considering both transistor and interconnect temperatures, the temperature-sensitive EM-induced mean time-to-failure and critical path timing are estimated and discussed.
-
Behaviour and reliability of wood tension members exposed to elevated temperatures
… this thesis. Reliability, a direct function of time to failure, is a measure of performance which falls naturally under a performance-based code. The objectives of this study focus on advancing our understanding of the structural behaviour of light-frame wood members subject to tension and …
Page 1 of 13