Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 134 for “"Time-temperature superposition"”.
-
Aplikace principu "time-temperature superposition" při studiu reologických vlastností polymerních materiálů
Tato bakalářská práce se zabývá studiem principu „time-temperature superposition“ a jeho možnou aplikovatelností na hydrogely. Na základě literární rešerše byl jako vhodný materiál pro optimalizaci tohoto principu vybrán včelí med z důvodu své jednoduché viskoelastické povahy (newtonovská …
-
Long-term creep modeling of wood using time temperature superposition principle
… were developed from short-term data using the time temperature superposition principle (TTSP) for kiln-dried southern pine loaded in compression parallel-to-grain and exposed to constant environmental conditions (~70°F, ~9%EMC). Short-term accelerated creep (17 hour) and recovery (35 hour) data …
-
Tuning Polymer Glass Formation Behavior and Understanding Time-temperature Superposition Breakdown with Oligomeric Additives
… proposed to explain and define glass transition temperatures. More specifically, both the origins of the glass transition and underlying classification of glass as a state of matter remain unresolved. Time-temperature superposition (TTS) is one of the most widely used techniques to characterize …
-
Development of tension and compression creep models for wood using the time-temperature superposition principle
… for wood in tension and compression using the Time-Temperature Superposition Principle (TTSP). The principle states that the long-term response of a polymer at lower temperature is equivalent to the short-term response at a higher temperature. Accelerated creep tests were conducted in tension …
-
Viscoelastic characterization of angle ply advanced composites
Time dependent properties of angle ply laminated Boron/Epoxy and Graphite/Epoxy fiber controlled composites were investigated. The main objective of this study was to develop a technique to establish interconversion of different test results using appropriate viscoelastic theory to formulate an …
-
The nonlinear viscoelastic behavior of adhesives and chopped fiber composites
… procedures of Schapery in conjunction with the time-temperature superposition principle to obtain a time-stress-temperature surface to define failure.
-
Component terminal dynamics in weakly and strongly interacting blends.
… melts. Their anomalous behavior, such as time-temperature superposition failure, broadening of calorimetric glass transition, etc., makes these systems very intriguing and challenges our understanding of miscible blend dynamics. In this work we investigated temperature and composition …
-
Ultrasonic and Viscoelastic Studies on Liquids at Different Pressures
… The measurements were made over a range of temperatures andpressures in the frequency range 5 to 78 MHz.Density, steady flow viscosity, real part and imaginary partof the shear impedance were measured on five liquids. Four of theliquids obeyed the Time-Temperature Superposition principle and …
-
The effect of temperature and strain rate on the tensile properties of some new textile yarns
… with particular reference to the effect of temperature and rate of strain application on the stress-strain behaviour. The work has been split into two parts covering different types of material. In part 1, an Instron tensile tester was used to investigate the effect of strain rate and …
-
Evaluation of Fracture Principles in Asphalt Concrete Utilizing the SC(B) Geometry
… different parameters such as thickness, testing temperatures, and loading rates. Thus, the purpose of this research was first to evaluate fracture energy by performing a ruggedness test based on ASTM E1169. Then, to apply fracture mechanics concepts to evaluate three specimen thicknesses (25, 50, …
-
The Dissolution of Regenerated Cellulose Multifilament Bundles in Ionic Liquid of 1- ethyl-3-methyl- imidazolium acetate [C2mim]+ [OAc]-
… acetate [C2mim]+ [OAc]- for different times and temperatures. This allowed both the speed of the dissolution to be determined at different temperatures as well as the dissolution activation energy Ea from time-temperature superposition. The different nature of the multifilament bundles …
-
Compression creep of a pultruded E-glass/polyester composite at elevated service temperatures
… composite under sustained loads at elevated temperatures in the range of those that might be seen in service. This investigation involved compression creep tests of material coupons performed at a constant stress level of 33% of ultimate strength and three temperatures levels; 23.3°C (74°F), …
-
The accelerated characterization of viscoelastic composite materials
… the accelerated characterization techniques of Time Temperature Superposition and Time Temperature Stress Superposition are treated in detail. An experimental procedure for applying the latter to composites is given along with results obtained on a particular T300/934 graphite/epoxy. The …
-
Characterization of UHMWPE Laminates for High Strain Rate Applications
… of polymers, the properties of UHMWPE are time-dependent. It is desired by research sponsors to know the properties of the material at high strain rates, in order to simulate the use of these materials in computer models. Properties believed to be significant which are investigated in this …
-
Time, temperature and frequency viscoelastic behavior of commercial polymers
… on characterizing the effects of physical aging, temperature, and frequency. The procedure for finding the shift rate, mu, is based on Struik's protocol. Time-temperature superposition (TTSP) of short-term data, at different temperatures, was done. Effective Time Theory (ETT) is used to find the …
-
The Effect of Viscoelasticity on the Life Expectancy of Light Composite Aircraft
… characterization of the epoxy matrix using the time-temperature superposition principle. The results were then applied to the spar to determine its long term response using the Classical Lamination Theory applied to complex geometries. Failure was determined based on the Tsai-Hill and maximum …
-
Aging model for commercial polymers
… of sewer pipes. The analysis uses the effective-time theory and time-temperature superposition (TTSP) methods proposed by Struik, as well as variations of these methods, as proposed by Chai and McCrum, Guerdoux et al. and others. The creep data generated by this study show that the time-dependent …
-
Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates
Adhesively bonded structures exhibit time dependent behavior when subjected to constant load (creep). In this investigation, long-term creep behavior of adhesively bonded aluminum and carbon fiber composite beams under flexural loading was investigated. Three point bending test was selected because …
-
Prediction of long-term creep behavior of epoxy adhesives for structural applications
… property of polymeric materials changes over time, especially when they are subjected to long-term loading scenarios. To predict the time-dependent viscoelastic behaviors of epoxy-based adhesive materials, it is imperative that reliable accelerated tests be developed to determine their …
-
Effects of Long-Term Creep on the Integrity of Modern Wood Structures
… yellow-poplar, and Parallam™ samples at temperatures ranging between 20 and 80° C and at 6, 9 and 12% moisture content. The principle of time-temperature superposition was applied to form a master curve that extended for a maximum of 2 years. The horizontal shift factors followed an …
Page 1 of 7