Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Timing Belt"”.

  1. A Computational Iteration Method to Analyze Mechanics of Timing Belt Systems with Non-Circular Pulleys

    Timing belt systems, usually consisting of a toothed belt and multiple pulleys, are used in many mechanical devices, especially in the internal combustion engine to synchronize the rotation of the crankshafts and the camshafts. When the system operates, the belt teeth will be transmitted by the …

    vt Repository record for A Computational Iteration Method to Analyze Mechanics of Timing Belt Systems with Non-Circular Pulleys (opens in a new tab)

  2. Improved lumped-parameter model for acoustic monitoring of tension in a timing belt used in automated material handling systems

    … industry and many rely on the operation of timing belt drives, which require that the belt be tensioned properly in order to function correctly. A series of experiments was carried out in which the frequency spectrum of acoustic radiation caused by transverse vibrations of a timing belt was …

    texas Repository record for Improved lumped-parameter model for acoustic monitoring of tension in a timing belt used in automated material handling systems (opens in a new tab)

  3. Novel Self-Actuated Long Travel Linear Actuator

    … through the interaction of a double-sided timing belt and a custom slotted linear rack. These provide the force transfer elements of the actuator and represent the primary novelty of the design. As such the double-sided timing belt-based self-powered linear actuator (DSTB-SPLA) is designed …

    alabama Repository record for Novel Self-Actuated Long Travel Linear Actuator (opens in a new tab)

  4. Synthesis and Design of a Bimodal Rotary Series Elastic Actuator

    … rpm. The measured efficiency was 0.797 due to a timing belt speed reduction that was then speed reduced with a harmonic gearhead. The clutch was a drum brake actuated with a pantograph linkage and ACME lead screw. This configuration produced 11 Nm of holding torque experimentally but was …

    vt Repository record for Synthesis and Design of a Bimodal Rotary Series Elastic Actuator (opens in a new tab)

  5. Design, fabrication, and testing of a hybrid vacuum-electric actuated robotic arm

    … and connecting a DC motor in parallel using a timing belt. Joint 2, the shoulder joint, had to produce the largest torque. This was accomplished by applying optimization methods to design a variable-radius pulley. The prototype arm utilized laser-cut acrylic and 3D printed components to keep …

    mcmaster Repository record for Design, fabrication, and testing of a hybrid vacuum-electric actuated robotic arm (opens in a new tab)

  6. Småvaruhiss anpassad för hemmet

    … on the lifting plate which is driven by a timing belt system within the frame. The mechanical stop is attached to the frame and should protect the motor mounted in the garage floor. The communication system consists of a keypad in the garage and a wireless remote control in the kitchen. …

    chalmers Repository record for Småvaruhiss anpassad för hemmet (opens in a new tab)

  7. Validation of a virtual prototyping method using computed torque and ILC as controllers on a parallel robot

    … the rotor and pulleys, and the stiffness of the timing belt. For the sake of simplicity, our dynamic model was not intended to take all these factors into account. Therefore, the fact that the simulation results closely match those of the practical experiment serves to validate this new method of …

    ets-quebec Download PDF for Validation of a virtual prototyping method using computed torque and ILC as controllers on a parallel robot (opens in a new tab)

  8. The Design, Construction, Simulation and Testing of a Novel Prototype Two-Stroke Opposed-Piston Engine

    … issue, as well as remedial modification to the timing system to prevent timing belt failure. Following this, sustained running under a load whilst using the cylinder pressure transducer could provide vital information over how well the design works under different conditions.

    east-anglia Download PDF for The Design, Construction, Simulation and Testing of a Novel Prototype Two-Stroke Opposed-Piston Engine (opens in a new tab)

  9. Design and Testing of a Novel Adhesion and Locomotion Method for Wall Climbing Vehicles

    The objective of this project was to design, construct and test a wall climbing vehicle which uses a novel vacuum tread system for both adhesion and locomotion. The design and manufacturing of this proof of concept vehicle is detailed with particular emphasis on the design decisions that proved …

    calpoly Repository record for Design and Testing of a Novel Adhesion and Locomotion Method for Wall Climbing Vehicles (opens in a new tab)

  10. Simulation und Analyse ringgespannter Zahnriemengetriebe

    Die Arbeit befasst sich mit der Simulation von Zweiwellen-Zahnriemengetrieben und deren Vorspannmethoden, insbesondere mit der relativ neuen Methode Spannring (ROLL-RING®). Das Ziel der vorliegenden Arbeit ist es, ein analytisches Simulationsmodell zu entwickeln, mit dem grundlegende Erkenntnisse …

    qucosa-diss

  11. Elektronicky řízená dělící hlava

    Přehled konstrukčních možností. Návrh konstrukčního řešení. Návrh hardwaru. Návrh softwaru. Výpočty převodů.

    brno-tech Repository record for Elektronicky řízená dělící hlava (opens in a new tab)

  12. Zvedák dopravníku s paletou

    Tato diplomová práce se zabývá návrhem zvedáku dopravníku s paletou dle zadaných parametrů. Práce obsahuje funkční, rozměrové a pevnostní výpočty, kontrolu nejvíce namáhané součásti pomocí metody konečných prvků. Součástí práce je i posouzení požadavků na údržbu a provoz stroje. K práci je …

    brno-tech Repository record for Zvedák dopravníku s paletou (opens in a new tab)

  13. Konstrukční návrh standu pro zkoušení jednoválcového motoru

    Diplomová práce se zabývá konstrukčním návrhem stanoviště pro zkoušení jednoválcového přeplňovaného motoru. První část práce teoreticky pojednává o principech a možnostech měření výkonových parametrů spalovacích motorů. Dále je rozebrána problematika zabývající se měřením jednoválcových pohonných …

    brno-tech Repository record for Konstrukční návrh standu pro zkoušení jednoválcového motoru (opens in a new tab)

  14. Řemenové pohony ventilového rozvodu

    Tato bakalářská práce se zabývá řemenovými pohony rozvodových mechanismů, zhodnocením jejich výhod a nevýhod. V první části pojednává o pohonu rozvodů obecně, stručný popis různých způsobů pohonu a porovnání jejich vlastností, vhodnosti použití. V další části rozebírá konkrétní pohon ozubenými …

    brno-tech Repository record for Řemenové pohony ventilového rozvodu (opens in a new tab)

  15. Návrh jednotné koncepce teleskopů manipulátorů přepravek pro zakladače typu Navette a SMC

    Cílem této diplomové práce je jednotný konstrukční návrh teleskopů pro automatizované zakladače typu SMC a Navette. Práce se skládá z technické a výkresové dokumentace. První část technické dokumentace je zaměřena na kritickou rešerši využívaných konstrukčních řešení ve světě. Ve druhé části …

    brno-tech Repository record for Návrh jednotné koncepce teleskopů manipulátorů přepravek pro zakladače typu Navette a SMC (opens in a new tab)

  16. Návrh systému pohonu elevátoru skladovacího systému LogiMat

    Tato diplomová práce se zabývá návrhem nového pohonu skladovacího systému Logimat. Zaměřena je na návrh nového pohonu pro zatížení až 1200 kg a rychlost a přizpůsobení rámu elevátoru novému pohonu. V první části je provedena rešerše vhodných typů pohonů. Dále následuje konstrukční řešení a …

    brno-tech Repository record for Návrh systému pohonu elevátoru skladovacího systému LogiMat (opens in a new tab)

  17. Návrh stroje pro odizolování plochých kabelů

    Tato diplomová práce se zabývá především návrhem koncepce jednoúčelového stroje pro odizolování plochých kabelů. Navržené řešení musí splňovat požadavky na kvalitu odizolování. Součástí práce je technicko – ekonomické zhodnocení voleného řešení a také analýza rizik.

    brno-tech Repository record for Návrh stroje pro odizolování plochých kabelů (opens in a new tab)

  18. Rotační manipulátor pro ruční svařování bubnů zakladače EXYZ

    Cílem této diplomové práce je návrh rotačního svařovacího manipulátoru pro ruční svařování lanových bubnů zakladače EXYZ. Zařízení je navrhováno za účelem zvýšení kvality prováděných svarů, které byly doposud zhotovovány při statickém uložení svarku bubnu. První část práce je věnována kritické …

    brno-tech Repository record for Rotační manipulátor pro ruční svařování bubnů zakladače EXYZ (opens in a new tab)

  19. Návrh koncepce zakladače SMC se symetricky umístěným hnacím členem

    V diplomové práci je prezentováno konstrukční řešení zakladače SMC (Schäfer Miniload Crane), jehož hnací člen bude umístěn symetricky vůči blokům vodících kladek, tj. v ose kolejnice. Koncepce zakladače SMC se symetricky umístěným hnacím členem by měla zamezit nadměrnému opotřebování vodících …

    brno-tech Repository record for Návrh koncepce zakladače SMC se symetricky umístěným hnacím členem (opens in a new tab)

Page 1 of 2