Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 59 for “"Timoshenko beam theory"”.
-
Impact Response Based on Timoshenko Beam Theory
… impact against a flexible column. Based on Timoshenko beam theory, an analytical solution method using mode superposition for the coupled spring-pole or column-pole system is presented. Any physical set of boundary conditions can be accommodated for the pole and the column. For all cases …
-
Lateral-Mode Vibration of Microcantilever-Based Sensors in Viscous Fluids Using Timoshenko Beam Theory
… incorporating both viscous fluid effects and "Timoshenko beam" effects (shear deformation and rotatory inertia). Analytical solutions for the frequency response are obtained and verified by reduction to known special cases. Beam response is examined for two harmonic load types that simulate …
-
ΔΥΝΑΜΙΚΗ ΤΩΝ ΡΗΓΜΑΤΩΜΕΝΩΝ ΔΟΚΩΝ ΣΤΟ ΝΕΡΟ
… FLOW WERE COMPUTED. THIS WAS ACCOMPLISHED WITH TIMOSHENKO BEAM THEORY, ANALYTICALLY AND WITH ONE DIMENSION FINITE ELEMENTS, BY INTRODUCING THE CRACK EFFECT WITH LOCAL COMPLIANCE COEFFICIENTS. ALSO WAS ACCOMPLISHED, BY THEORY OF ELASTICITY WITH PLAIN STRESS QUADRILATERAL FINITE ELEMENTS, BY …
-
An Efficient Reduced Order Modeling Method for Analyzing Composite Beams Under Aeroelastic Loading
… An example of this might be a box-beam made up of 4 laminates, all of which are quasi-isotropic. This results in neglecting more complex designs that might yield a more effective solution, but require a greater analysis effort. The present work aims to show that the incorporation of …
-
Elasticity-based vibrations of hollow anisotropic beams and an evaluation of the shape factor for hollow anisotropic sections
… and natural frequencies of hollow anisotropic beams free from end restraints using full three-dimensional elasticity solutions and common one-dimensional beam theory approximations. Calculations of the natural frequencies are made for a number of hollow beam dimensions using the one-dimensional …
-
Analytical Study on Adhesively Bonded Joints Using Peeling Test and Symmetric Composite Models Based on Bernoulli-Euler and Timoshenko Beam Theories for Elastic and Viscoelastic Materials
… In most analytical studies, the Bernoulli-Euler beam theory is employed to describe the behaviour of adherends. In the current work, three analytical models are developed for adhesively bonded joints using the Timoshenko beam theory for elastic material and a Bernoulli-Euler beam model for …
-
Nondestructive Damage Detection in General Beams
… extent, and the severity of damage in general beams. By general beams, we mean beyond Euler-Bernoulli beams (i.e. slender beams) to deep beams and stubby beams whose response may be based on the Timoshenko beam theory, and the Theory of Elasticity. After presenting the governing equations of …
-
The use of maximum rate of dissipation criterion to model beams with internal dissipation
… for the frequency equation of composite beams undergoing forced vibration with damping. The governing differential equations of motion of the composite beam are derived analytically for bending and shear deformation. The basic equations of Timoshenko beam theory and assumption of maximum …
-
Analytical and experimental studies of beam waveguide absorbers for structural damping
… a broad frequency range using light weight beam waveguide absorbers. Viscoelastic and constrained layer beam waveguide absorbers were studied both theoretically and experimentally. Impedances of the waveguide absorbers at the attachment point were predicted using both Bernoulli-Euler and …
-
Dynamic characteristics of a hyperboloid shell of revolution with application to flexible couplings
… Method. the Fiinite Element Method is applied to Timoshenko Beam Theory, and Galerkin's Assumed Mode Shape Method is applied to the Kirchoff-Love theory of thin shells. Both methods are applied to a fixed-free and fixed-fixed HSR. A parametric study is done to study the effect of the geometric …
-
Nonlinear behaviour and design of steel built-up columns under axial and transverse loading
… at investigating the behaviour of laced built-up beam-columns with arbitrary boundary conditions and providing practical guidance for their design. To that effect, a combined experimental, numerical and analytical approach is adopted. Initially, the design and execution of a series of experimental …
-
Modeling of multiple layered piezoelectric actuators in active structural control
… equations of motion of a simply supported beam are derived using Timoshenko beam theory. This approach accounts for shear deformation and allows the actuator-applied moments to be directly incorporated into the equations of motion without further approximation. The model is cast in state …
-
Transient flexural wave propagation in beams with discontinuities of cross section
… to determine the transient response of finite beams with discontinuities of cross section subiected to eccentric longitudinal impact. Experiments were performed on several stepped beams with increased and reduced cross section and with various end conditions. The analysis was based on the …
-
Study of stereocilia mechanics with applications to biomimetic sensor design
In this project, we developed an active beam sensor modeled after the auditory stereocilia. The active beam sensor consists of a cantilever beam with a lead zirconate titanate (PZT) piezoelectric bimorph actuator mounted at its fixed end. The active sensor is used to measure base and acoustic …
-
Vibration and stability analysis of a damped free-free Timoshenko beam under the influence of a directionally controlled end thrust
… In modelling the flexible missile as a free-free beam, most of the researchers have used the Bemoulli-Euler beam theory. As we may know, this theory ignores the rotary inertia and shear deformation effects, which is not always justified. In fact, the shear deformation effect adds more deflection …
-
Stiffness-Driven Design and Interface Debonding Study of FRP Sandwich Structures for Bridges
… expressions which allow them to be designed by Timoshenko beam theory. The key factors for the expressions were identified and a design procedure was recommended in this study as well. Finally, this study investigated the application of tilted sandwich debond (TSD) tests to the interface …
-
Development of a fast and cost-effective asphalt mixture fatigue test system
… on cylindrical asphalt specimens in three-point beam mode (herein referred to as three-point bending cylinder (3PBC) geometry). Timoshenko beam theory along with the viscoelastic continuum damage (VECD) theory was implemented to model the mechanical response of the specimens. An excellent …
-
Finite element dynamic analysis of rotating tapered three dimensional Timoshenko beams
… for the three dimensional rotating tapered Timoshenko beam using a Lagrangian formulation in conjunction with the finite element technique. These equations include the effects of Coriolis forces, shear deformation and rotary inertia, hub radius, taper ratios and pre-cone and setting angle. A …
-
Large Deflection Effects on the ERR and Mode Partitioning of the Single and Double Cantilever Beam Sandwich Debond Configurations
… debonds for the Single and Double Cantilever Beam Sandwich Composite testing configurations, which are loaded with an applied shear force and/or bending moment. Studies on this topic have been done by employing geometrically linear theories (either Euler-Bernoulli or Timoshenko beam theory). …
-
Unconventional finite element method for nonlinear analysis of beams and plates
In this thesis, mixed finite element models of beams and plates bending are developed to include other variables (i.e., the membrane forces and shear forces) in addition to the bending moments and vertical deflection, and to see the effect of it on the nonlinear analysis. Models were developed …
Page 1 of 3