Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"Tip size"”.
-
Determinants of Tipping Behavior: Evidence from US Restaurants
This study aims to analyze people’s tipping behavior to assess the factors that determine both the likelihood of leaving a tip and tip size in US restaurants. A total 2,334 away from home eating events are considered in this study based on the nationally representative National Household Food …
-
THE EFFECTS OF REGULATORY FOCUS & GUIDELINE ON TIPPING BEHAVIOR
… (RF) orientations (promotion or prevention) on tipping behavior and negative WOM intention (NWI) in service failures. Three studies measuring chronic (Study 1) or manipulating (Studies 2 & 3) RF orientations present different effects on tip size and NWI. Study 1 shows that there is a negative …
-
Measuring The Nanomechanics Of Nanoconfined Water Layers
… AFM measurements, we measured the effects of the tip size on the stiffness and damping of a nanoconfined model liquid tetrakis-2-ethyhexoxysilane (TEHOS) by using a number of tips of different sizes. We found that the stiffness and damping coefficient of the liquid increase linearly with the …
-
An Investigation of Testing Parameters on the Frictional Properties of Patterned Core-shell Nanostructures
… μN, and 500 μN) and diamond counterface indenter tip radii (1 μm, 5 μm, and 20 μm) were selected for the testing of Al/diamond-like-carbon (DLC) and Al/amorphous silicon (a-Si) CSNTSs. The measured friction values of the CSNTSs were then compared to a matching Al/DLC film and Al/a-Si film, …
-
Tipping: A Reward for Quality of Service? An Internal Review
Tips or gratuities in the service industry are often viewed as a mechanism by which a guest exchanges a voluntary sum of money for quality of service. If this assumption is valid, consumers should leave larger tips to elicit better service and provide smaller tips to show dissatisfaction when worse …
-
Lasting pain in dairy calves
… it examined how hot-iron application time and tip size affect wound characteristics and healing. Larger tips produced larger wounds with longer healing times, while longer application times resulted in deeper and larger wounds but did not affect healing duration. I conclude that the memory test …
-
High-Precision Micropipette Thermal Sensor for Measurement of Thermal Conductivity of Carbon Nanotubes Thin Film
… using the developed sensor. Various micrometer-sized sensors, which range from 2 µm to 30 µm, were produced and tested. The capability of the sensor in measuring thermal fluctuation at micro level with an estimated resolution of ±0.002oC is demonstrated. The sensitivity of sensors was recorded …
-
Theory, Fabrication and Characterization of Micromachined Electrolytic Solution Conductivity Sensors
… resistance for the RTD fabricated on the probe tip. The RTD integrated on the probe tip achieved an accuracy of +/-0.5% from 0 to 100°C with a parabolic correlation. A 200 mum probe gave a thermal resistance of 553°C/W during self-heating in water. With a RTD integrated on the sensor …
-
Nanoindentation-based Methods for Studying the Mechanical Behavior of Living Plant Cells
… and extensibility of the cell wall determine the size, shape, morphology, and growth behavior of a plant. In addition, the turgor pressure within each cell changes throughout the life cycle of the plant in response to genetic and environmental changes. The connection between the plant biology and …
-
Thermal Characterization of Austenite Stainless Steel (304) and Cnt Films of Varying Thickness Using Micropipette Thermal Sensors
… thermal sensor. Micropipette sensors of various tip sizes were fabricated and tested for the sensitivity and reliability. The sensitivity deviated by 0.11 for a batch of pipette coated under same physical vapor deposition (PVD) setting without being affected by a tip size. Annealing, rubber …
-
Surface damage of metallic implants due to mechanical loading and chemical reactions
… degree of roughness determined by tool tip size and motion of tool path or feeding speed. The central hypothesis for this work is that during contact loading of metallic implants, mechanisms of damage and dissolution are determined by contact loads, plastic deformation, residual stresses …
-
Study of gigaseal formation in patch clamping using nanotechnology
… the effect of roughness, hydrophilicity and tip size on gigaseal’ formation has been studied. Patch clamp experiments were carried out using conventional and treated pipettes. In the third section of this research, glass micropipettes were characterized using various measurement techniques. …
-
A Comparison of Manufacturers’ Claims of Attenuation Rates in Non-Custom Earplugs
… frequencies) and were tested using different ear tip sizes. Results indicated that several earplugs achieved attenuation levels comparable to or exceeding their advertised noise reduction ratings (NRR), though consistency varied across models. Earplugs such as Loop Experience and Etymotic ER20XS …
-
Relationship between cutting parameters and bit geometry in rotary cutting
… the bit geometry parameters (angle of the bit tip, bit tip size and shape of the bit) in order to reduce the amount of specific respirable dust generated and the specific energy consumed in rotary cutting. In the cutting process when two grooves are made in the rock at certain spacing, a …
-
Methods to improve indentation results on soft materials and anisotropic biological tissues
… for non-circular contact between a spherical tip and the transversely isotropic material. It develops experimental methods to determine the indentation moduli of a locally transversely isotropic collagenous material as well as the correlation between the aspect ratios (ARs) of contact and …
-
Towards Understanding Asteroid Cohesion: A Study of Adhesion on Micron-Sized Planetary Analogues using an Atomic Force Microscope (AFM) with Implications for Sample Return Analysis.
… affect cohesive forces that act between micron-sized grains. In our first investigation we explored interactions of JSC-1 lunar simulant grains using three sample sizes, three spherical AFM tip diameters, and varying relative humidity, observing that the results are very dependent on the RH and, …
-
Numerical simulation of continuous miner rock cutting process
… including: cutting speed, bit geometry, bit tip size, multiple bit interaction, and free face are studied using the thrust and cutting force calculated from the simulation. The specific work spent in each case is estimated by the thrust, cutting force, cutting time, and the volume of the …
-
Microelectrophoresis of semiconductive quantum dots
… to eject charged substances from fine-tipped glass micropipettes into tissue and cells via electrical currents. However, few studies have paid any attention to exploring standard experimental protocols for the intracellular microelectrophoretic ejection of biocompatible nanoparticles. …
-
Quantification of oxygen release by plant roots in constructed wetlands
… were studied using microelectrodes (3–10 μm tip size). The DO value on the surface of the bulrush lateral roots increased from 0.64 to 2.04 mg L−1 as the bulk BOD5 increased from 24 to 1267 mg L−1. A layer of oxygen was detected around the lateral roots, and its thickness (760–1160 μm) also …
-
The influence of tip distribution policy on consumer tipping behaviors
Tip sharing and tip pooling have become common tip distribution practices in addition to the tradition of servers keeping their individual tips. This article contributes to the study of tip distribution systems from the consumer perspective. The purpose of this study is to examine the impact of …
Page 1 of 2