Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 214 for “"Tip-in"”.
-
Plastic Relaxation Around Crack Tip In Composite Materials
The concept of continuously distributed dislocations is used to investigate the mechanical behavior of fractured composite materials, As a first approximation to the complicated physical configuration of a composite material, the current investigation concerns a simp1ified physical model by …
-
Localizing a catheter tip in three-dimensional ultrasound
Combined imaging modalities, like Computer Tomography (CT) and two-dimensional ultrasound, are used to obtain sufficient visual information for minimally invasive procedures, where visibility of organs is typically obstructed by the skin of the patient. The supporting quality of a combined imaging …
-
The influence of the environment on the plastic zone of a propagating fatigue crack tip in aluminum and steel
Crack closure measurements were used in an effort to measure changes in bulk plasticity due to changes in environment at the tip of a propagating fatigue crack. The study was done to determine if there are changes in the residual stresses in the plastically deformed region as a function of the two …
-
Elastic-plastic strain and the effect of non-singular stress at the crack tip in finite thickness plate using various experimental and analytical methods
Thesis (M.S.)--Michigan State University. Department of Materials Science and Mechanics, 1992
-
Characterization of the roles of turnip crinkle virus coat protein and the NAC transcription factor tip in eliciting resistance and hypersensitive responses in Arabidopsis thaliana
The Arabidopsis - Turnip crinkle virus (TCV) model system has proved very useful in studying the molecular aspects of defense mechanisms mediated by virus - host interactions. It has been established that, in addition to its structural role, TCV coat protein (CP) has multiple roles in virus - host …
-
Control Oriented Modeling of an Automotive Drivetrain for Anti-Jerk Control
Drivability is an important metric during the development of an automobile. Calibration engineers spend a significant amount of time trying to improve the drivability of vehicles for various driving conditions. With an increase in the available computational power in an automobile, novel …
-
Development and testing of modifications on an STS combine to improve grain quality in corn
<p>Laboratory tests were conducted using a stationary test stand to determine the effects of specific ear orientation into a STS feed accelerator. Replications for three different treatments were conducted as follows: roll-in, random, and tip-in ear orientation. The roll-in orientation had the …
-
Development of a Silicon Nanowire Mask Using Scanning Probe Microscopy
Scanning probe microscopy techniques were used to investigate the desorption of hydrogen passivated silicon to form SiO2 etch masks The application of the etch masks were planned on being used to manufacture silicon nanowires. Low concentration hydrofluoric acid was used to passivate the surface. …
-
Interaction between Phytophthora megasperma f. sp. glycinea and Glycine max
The Glycine max (soybean): Phytophthora megasperma f. sp. glycinea (Pmg) pathosystem has served as a model for elucidating the mechansim of incompatibility in gene-for-gene interactions. This interaction was accurately and precisely investigated on the taproots of aeroponically-grown soybeans. An …
-
Performance improvements of turbocharged engines with the use of a PTP turbo blanket
Efforts in R&D of modern vehicles are highly focused on improvements of the overall efficiency. The engine still has potential for better performance which not only implies pure efficiency considerations but also the power output specific to the engine size and weight. Turbochargers are a key …
-
Progressive failure modeling in notched cross-ply fibrous composites
… was to model and simulate progressive failure initiating from a notch tip in a laminated fibrous composite subjected to tensile in-plane loading. The micro/macro-level approach was used for this study. The micro-level analysis used the 3-D unit cell model while macro-level analysis used the …
-
Automating Scanning Tunnelling Microscopy: A Comparative Study of Machine Learning and Deterministic Methods
Scanning probe microscopy (SPM) methods allow for atomic scale investigation of material surfaces in real space and provide the potential to construct atomically precise structures atom-by-atom. Although these techniques have been available for decades, full automation of the processes involved in …
-
Investigation of nonlinear crack tip deformation including the effects of unsymmetric spatial variations of material properties
An extensive investigation of non-uniform material effects on static fracture analyses is undertaken. Included in the study are theoretical, experimental and numerical techniques of focusing attention on the nonsymmetric deformation fields around a crack tip in a non-uniform yield strength varying …
-
Design, modeling and fabrication of contact stiffness calibration samples for CR-AFM
… of an atomic force microscope (AFM) cantilever tip in contact with a surface, which is a critical step in the measurement of nano-mechanical properties. The calibration exploits the relationship between contact resonance (CR) frequency and contact stiffness during contact resonance atomic force …
-
An opening mode crack in a nonhomogeneous elastic material
In this thesis, an opening mode crack in a nonhomogeneous material is studied by assuming a continuously varying shear modulus which characterizes a decreasing rigidity near the crack tip. Explicit expressions for the stress and displacement fields are derived and numerical results are presented …
-
Trauma-informed practice among educators of young children : a multiple case study
… how healthy development can be disrupted and brain development altered by the body’s stress response when prolonged (Avery et al., 2021; Felitti et al., 1998; Maynard et al., 2019; van der Kolk, 2014). These findings have been of particular focus for the field of education, as school outcomes and …
-
The effect of flow rate, needle design, and needle placement on apical pressure and irrigant exchange in an in vitro tooth model
Heavy irrigation forces in a root canal can lead to irrigant extrusion accidents, causing negative sequelae for patients. There are no guidelines for a safe and optimal irrigation flow rate and little data on the apical pressures generated during irrigation. This study aimed to measure the pressure …
-
MODELING AND ANALYSIS FOR DRIVELINE JERK CONTROL
In modern-day automotive industry, automotive manufacturers pay keen attention to driver’s safety and comfort by ensuring good vehicle drivability, feel of acceleration, limiting jerk and noise. The vehicle driveline plays a critical role to meet these criteria. By using high-fidelity simulation …
-
An analytical and finite element analysis of fracture in nonhomogeneous viscoelastic material
… viscoelastic media is studied by solving the boundary value problem that models an antiplane (tearing mode) crack. The inhomogeneity is characterized by a decreasing rigidity near the crack tip. In the case of a infinite domain, the equation of equilibrium is solved by Laplace and …
Page 1 of 11