Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"Tire Force"”.

  1. Design and Qualification of a Test Fixture to Experimentally Determine Global Tire Force Properties

    … advent of finite element methods has changed the tire industry's design process over the past three decades. Analyses, previously impractical using analytical methods and physically limited by experimental methods, can now be performed using computational methods. This decreases the cost and time …

    vt Repository record for Design and Qualification of a Test Fixture to Experimentally Determine Global Tire Force Properties (opens in a new tab)

  2. Intelligent Tire Based Tire Force Characterization and its Application in Vehicle Stability and Performance

    In any automotive system, the tires play a very crucial role in defining both the safety and performance of the vehicle. The interaction between the tire and the road surface determines the vehicle's ability to accelerate, decelerate and steer. Having information about this interaction in real-time …

    vt Repository record for Intelligent Tire Based Tire Force Characterization and its Application in Vehicle Stability and Performance (opens in a new tab)

  3. Estimation of the Longitudinal and Lateral Velocities of a Vehicle using Extended Kalman Filters

    Vehicle motion and tire forces have been estimated using extended Kalman filters for many years. The use of extended Kalman filters is primarily motivated by the simultaneous presence of nonlinear dynamics and sensor noise. Two versions of extended Kalman filters are employed in this thesis: one …

    gatech Repository record for Estimation of the Longitudinal and Lateral Velocities of a Vehicle using Extended Kalman Filters (opens in a new tab)

  4. Analysis of Transient and Steady State Vehicle Handling with Torque Vectoring

    … limit handling capability through optimal tire force allocation and drivability demonstrated by understeer gradient. Optimal tire force allocation prescribes equal usage in all four tires during maneuvers. This is enabled using steering and Torque Vectoring. An analytical proof is presented …

    vt Repository record for Analysis of Transient and Steady State Vehicle Handling with Torque Vectoring (opens in a new tab)

  5. Modelling and Navigation of Autonomous Vehicles on Roundabouts

    … consideration for vehicle turn physics. Firstly, tire force data was gathered by performing driving maneuvers on a test track using a vehicle fitted with tire measurement equipment. The generated tire force data was used to compare various combined slip tire force models for their accuracy. The …

    waterloo Repository record for Modelling and Navigation of Autonomous Vehicles on Roundabouts (opens in a new tab)

  6. VEHICLE HANDLING, STABILITY, AND BIFURCAITON ANALYSIS FOR NONLINEAR VEHICLE MODELS

    … load transfer effects. Nonlinearities stem from tire force characteristics that include for tire force saturation. Bifurcations were studied by quasi-static variations of vehicle speed and front steer angle. System models were expanded, assessing overall stability, including vehicle behavior …

    maryland Repository record for VEHICLE HANDLING, STABILITY, AND BIFURCAITON ANALYSIS FOR NONLINEAR VEHICLE MODELS (opens in a new tab)

  7. Grip optimization in critical braking and cornering maneuvers using semi-active and active road vehicle suspensions

    … road holding: The material and texture of the tire contacting area with road; the vertical force pressing the contacting surface; and the friction of the road surface, et cetera. This study focuses on the in uence of tire vertical force variation on the tire grip. Due to the lack of available …

    chalmers Repository record for Grip optimization in critical braking and cornering maneuvers using semi-active and active road vehicle suspensions (opens in a new tab)

  8. Simulation and parameter sensitivity studies of skid-steering and Ackerman steering on an eight-wheeled vehicle

    … model that includes longitudinal and lateral tire force models is described, including its implementation into the Matlab/Simulink simulation environment. The tire force models account for the effect of longitudinal slip as well as lateral slip angles, and the force characteristics are assumed …

    texas Repository record for Simulation and parameter sensitivity studies of skid-steering and Ackerman steering on an eight-wheeled vehicle (opens in a new tab) Restricted access

  9. Driver behavior classification and lateral control for automobile safety systems

    … on developing three technologies (longitudinal tire force estimation, driver behavior classification and lateral control) using low-cost sensors that can be utilized in ADAS. For the longitudinal tire force estimation, a low cost 1Hz positioning global system (GPS) and a steering angle sensor …

    njit Repository record for Driver behavior classification and lateral control for automobile safety systems (opens in a new tab)

  10. Inversion-Based Control for Autonomous Racing and Navigation

    … motion can be achieved by the vehicle under tire force and friction limits. This thesis develops an iterative force-consistency inversion framework for the complementary problem: given an achievable trajectory demand and a vehicle model that is close enough to the real plant, compute a set of …

    washington Repository record for Inversion-Based Control for Autonomous Racing and Navigation (opens in a new tab)

  11. Simulation and Characterization of Tire Nonuniformity-induced Steering Nibble Vibrations through Integrated Subsystems Modeling

    Periodic force variations produced by nonuniform tire/wheel assemblies are known root causes of torsional steering wheel vibrations known as 'nibble'. Previous studies have sought to investigate this issue through modeling or experimentation involving the entire vehicle or specific subsystems, …

    clemson Repository record for Simulation and Characterization of Tire Nonuniformity-induced Steering Nibble Vibrations through Integrated Subsystems Modeling (opens in a new tab)

  12. Physical understanding of tire transient handling behavior

    … more understanding of physical background of tire behavior, especially in transient rolling conditions with combined slip. The focus of this research is physical description of transient generation of tire lateral force and aligning torque. Using acceleration measurement on the tire inner …

    qucosa-diss

  13. Developing a Vehicle Hydroplaning Simulation using Abaqus and CarSim

    Tires are the most influential component of the vehicle as they constitute the only contact between the vehicle and the road and have to generate and transmit forces necessary for the driver to control the vehicle. Hydroplaning is a phenomenon which occurs when a layer of water builds up between …

    vt Repository record for Developing a Vehicle Hydroplaning Simulation using Abaqus and CarSim (opens in a new tab)

  14. Full Vehicle State Estimation Using a Holistic Corner-based Approach

    … in reliable road angle and vehicle states (tire forces and vehicle velocities) estimation. Advances in applications of sensor technologies, sensor fusion, and cooperative estimation in intelligent transportation systems facilitate reliable and robust estimation of vehicle states and road …

    waterloo Repository record for Full Vehicle State Estimation Using a Holistic Corner-based Approach (opens in a new tab)

  15. Optimal passive nonlinear damper design methodology for road race application

    … which maximizes lateral acceleration based on tire data, optimization of the objective function by varying damping and inertance, identification of mode shapes and root locus analysis. No closed form solution exists for an optimal linear or nonlinear damper which maximizes lateral acceleration. …

    unm Repository record for Optimal passive nonlinear damper design methodology for road race application (opens in a new tab)

  16. Identifiability analysis of a tractor and single axle towed implement model

    … axle towed implement model with six uncertain tire force model parameters from tractor yaw rate and implement yaw rate data. The analysis first considered datasets generated from simulation of the model with known parameter values to examine the effect of measurement error, sampling rate, and …

    iastate Repository record for Identifiability analysis of a tractor and single axle towed implement model (opens in a new tab)

  17. Control Design for Differential Lock Synchronization in Heavy-Duty Trucks

    … Following a spin-out, achieving this match can force the driver to slow down or stop, wasting vehicle momentum and creating a safety risk on slopes. This thesis develops and compares active control strategies that synchronize the differential shafts after a wheel spin-out, enabling faster and …

    chalmers Repository record for Control Design for Differential Lock Synchronization in Heavy-Duty Trucks (opens in a new tab)

  18. Roll motion control with a fully active suspension system: High-Level Motion Control and Low-Level Actuator Implementation

    … motion directly affects lateral load transfer, tire force distribution, and handling consistency. This thesis therefore investigates roll-gradient shaping for a fully active suspension system in simulated cornering maneuvers and driver-in-the-loop tests, with emphasis on how body-level roll …

    chalmers Repository record for Roll motion control with a fully active suspension system: High-Level Motion Control and Low-Level Actuator Implementation (opens in a new tab)

  19. Adaptive Rollover Control Algorithm Based on an Off-Road Tire Model

    … This research begins with the study of the tire, as it is the single component on the vehicle responsible for generating all of the non-inertial forces to direct the motion of the vehicle. Tire force and moment behavior has been researched extensively and several accurate tire models exist. …

    vt Repository record for Adaptive Rollover Control Algorithm Based on an Off-Road Tire Model (opens in a new tab)

  20. Treatment of Uncertainties in Vehicle and Terramechanics Systems Using a Polynomial Chaos Approach

    … vehicle-soil interaction model, two stochastic tire-snow interaction models, and two stochastic tire-force relations. The uncertainties are quantified and propagated through vehicle and terramechanics systems using a polynomial chaos approach. Algorithms which can predict the geometry of the …

    vt Repository record for Treatment of Uncertainties in Vehicle and Terramechanics Systems Using a Polynomial Chaos Approach (opens in a new tab)

Page 1 of 2