Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"Tissue Mimicking Material"”.
-
Heat Transfer Analysis of Bio-Printed Tissue Mimicking Material Mixed with Silver Nanoparticles
Novel tissue mimicking materials have been developed for cancer treatment research. In the present research work, the tissue mimicking material is printed using 3D bioprinting technology. The nanoparticles are homogeneously mixed with tissue mimicking materials to enhance the heating capacity. The …
-
Creation of brain tissue-mimicking material and multi-material gradient 3D printer for magnetic resonance elastography phantom
… resonance elastography (MRE) is a non-invasive tissue imaging method that measures shear stiffness. While MRE has many benefits, it is not currently used clinically for scanning the human brain, mainly because it has not been validated with independent mechanical property testing methods. This …
-
Development of a Tissue-Mimicking Brain Phantom for Neurosurgical Pre-Operative Planning and Training
… of this study was to develop a brain substitute material based on gelatin that simulates the mechanical properties of brain tissue. Tissue mimicking materials were developed by matching the mechanical properties of porcine brain tissue under compressive loading at strain rates typical of surgical …
-
Estimation of Ultrasound Induced Heat Generationfor Therapeutic Applications
… due to propagation of ultrasound, in soft tissue mimicking material, is examined. Using numerical methods, pressure fields are first computed for different source geometries, signal frequencies, and signal waveforms. Volumetric heat generation rates are then calculated from the computed …
-
An experimental study of compression force effect on electrosurgical tissue welding
… such as sticking and unwanted damage to surround tissue when used for tissue welding. Through a literature study of commercially available bipolar forceps, it is found that the compression force between the jaws is non-uniform, which leads to inconsistent tissue joint quality. In this research, …
-
THE DEVELOPMENT OF A LOW DENSITY RADIOCHROMIC GEL DOSIMETER
This research aims to develop a tissue-mimicking material and produce a 3D gelatin that has density of approximately a human lung, which is in the ranges of (0.25 – 0.35) g/cm3. Tissue equivalent models are important in order to study the radiation dose planned for patients. To achieve the desired …
-
Feasibility of in vivo SAXS imaging for detection of Alzheimer's disease
… structure which allows for discriminating materials based on their scatter cross sections. This dissertation explores the feasibility of SAXS imaging for the detection of Alzheimer's disease (AD) amyloid plaques. The inherent scatter cross sections of amyloid plaque serve as biomarkers in …
-
A wave equation approach to ultrasound elastography
Tissue elastography is a field of medical imaging which deals with obtaining images of tissue mechanical properties, in particular tissue elasticity. Every elastography imaging system has three major components: an exciter, an imaging system, and an image processing software module. The principle …
-
Investigation of bubble dynamics and heating during focused ultrasound insonation in tissue-mimicking materials
The deposition of ultrasonic energy in tissue can cause tissue damage due to local heating. For pressures above a critical threshold, cavitation will occur in tissue and bubbles will be created. These oscillating bubbles can induce a much larger thermal energy deposition in the local region. …
-
3D Printing of Functional Anthropomorphic Phantoms Using Soft Materials for Applications in Cardiology
… emergence of 3D printing and 3D printable soft materials provide the opportunity to produce anthropomorphic phantoms with complex geometries and realistic properties for applications in cardiology. This thesis presents novel work in this field of research, focusing on the use of two soft …
-
Design of 2D sparse array transducers for anomaly detection associated with a transcranial ultrasound system
… device provides a conformable piezocomposite material and demonstrated reduced mechanical cross-talk between neighbouring array elements and improved the operational bandwidth, while the mechanically stiff C13 devices perform better in terms of sensitivity. Moreover, the C13 device …
-
Development of Surface Acoustic Wave Optical Coherence Elastography (SAW-OCE) for Soft Tissue Characterisation
Mechanical properties of biological soft tissues are closely related to their underlying pathological conditions. In clinical practice, they have been widely recognized as a significant indicator to assist disease diagnosis. There has been enormous technical advancement in imaging modalities such …
-
Acoustic characterisation of ultrasound contrast agents at high frequency
… intravascular, ophthalmology and superficial tissue imaging. Although research studying the acoustic response of UCAs at low diagnostic ultrasonic frequencies has been well documented, quantitative information on the acoustical properties of UCAs at high ultrasonic frequencies is limited. In …
-
Subdermal Fat Determined by Ultrasound and Electrical Conductivity, and Its Relationship to Body Condition Score of Dairy Cows
… field tool for estimation of changes in body tissue reserves is time consuming and subjective. The relationship between body condition score and subdermal fat (SFAT) was determined biweekly as potential for development of a low cost, portable digital ultrasonic or conductivity sensor for BCS. …
-
Development of a Colonoscopy Simulator for the Evaluation of Colonoscopy Devices
… literature was reviewed and possible tissue mimicking materials were selected. The suitability of the selected materials was evaluated by testing the frictional and elastic properties of the materials and subsequently comparing the results to those of colon tissue. PVA cryogel was …
-
Tissue characterization by ultrasound: a study of tissue-mimicking materials and quantitative ultrasonics
… information about size and structure of the tissues, and functions of the organs of the body. The research presented in this dissertation involves two important aspects of the ultrasonic imaging, system calibration for quality assurance and tissue characterization. The first part presents the …
-
Development of acoustic tissue mimicking materials for preclinical ultrasound imaging applications
… the phantom should closely match those of soft tissue. Numerous commercial test phantoms of this type are available for use with clinical ultrasound scanners, which use frequencies up to 20 MHz. However, scanners designed for imaging small animals in preclinical studies, typically operate at …
-
Development of a freehand three-dimensional radial endoscopic ultrasonography system
… the radial echoendoscopes. Various agar-based tissue mimicking material (TMM) recipes were characterised using a scanning acoustic macroscope to obtain the acoustic properties of attenuation, backscatter and speed of sound. Using these results, a number of endoscopic ultrasound phantoms were …
-
On ultrasound elastography : simulation, experiment, and algorithm development
… Controller (Zetec, Québec, Québec, Canada) and Tissue Mimicking Material (TMM), which was manufactured in the Medical Physics Department, Edinburgh Royal Infirmary. In the experiments, uniform compression was applied over the TMM object using an adaptor that employs the 10MHz transducer and the …
-
Process-Property Characterization for Multi-Material Jetting Applications
Material jetting (MJ) is an additive manufacturing (AM) process that involves the selective jetting of a liquid material into the shape of a layer and subsequent solidification, often via ultraviolet (UV) irradiation, in a layer-wise fashion. The MJ process has the potential to emerge as a robust …
Page 1 of 2