Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Titanium silicide"”.
-
RAMAN SCATTERING OF TITANIUM SILICIDE
… scaling down to the deep sub-micron regime, the titanium (Ti) self-aligned silicide (SALICIDE) contact technology has increasingly become an integral part of high performance CMOS devices. It is used to lower the sheet resistance of the gate and source/drain regions contact and series resistance, …
-
Kinetic optimization of titanium silicide chemical vapor deposition
Titanium disilicide (TiSi$\sb 2$) has found widespread application as a material for transistor gate/source/drain contacts. Considerable interest has arisen in fabrication by chemical vapor deposition (CVD) because of scalability problems with the salicide process (a Ti-Si solid-phase reaction) …
-
Chemical kinetic studies of titanium silicide chemical vapor deposition
Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by Howard Ding (hding2@illinois.edu) on 2011-05-07T14:48:04Z Item is restricted indefinitely.
-
Low energy ion beam modification of the titanium silicide (100) reaction
This research investigated the effects of the ion beam assisted deposition process on the interdiffusion and reaction of Ti thin films deposited on Si (100). The analytical techniques employed for the characterization of these thin films included transmission electron microscopy, scanning electron …
-
Application of titanium silicide as an interconnect in deep submicron integrated chip manufacturing
Although titanium silicide is thermally stable at high temperatures in a face centred orthorhombic structure (C54-TiSi2), there exists a meta-stable phase at lower temperatures with a base centred orthorhombic structure (C49-TiSi2) which first forms. The final C54 phase is desired over the C49 …
-
Temperature dependent current-voltage characteristics of TiSi2/n+/p silicon shallow junctions
… dependent current-voltage characteristics, of titanium silicide films on n+</sup>/p silicon shallow junctions, has been presented here. The fabrication technique involves the formation of shallow pn junctions, by ion-implantation of As+ through titanium films evaporated on P type silicon. The …
-
Cobalt silicide characterization
… which leads to degraded device performances. Silicides can reduce sheet resistance on poly-silicon lines and shallow junctions. The mostly widely accepted silicide process, Titanium Silicide (TiSi2), was adopted because of its low resistivity. Major limitations of TiSi2 include an inability to …
-
Characterisation of mechanically alloyed feedstock for laser-powder bed fusion: titanium silicon carbide metal matrix composite
… Herein, a metal matrix composite (MMC) with a titanium (Ti6Al4V) matrix reinforced with silicon carbide (SiC) is characterised. The research investigated an innovative and novel feedstock production process involving elements of mechanical alloying, tailored to the requirements of the layer …
-
Investigation of Mn and Ti based self-forming barriers for future back-end-of-the-line interconnects
… dielectrics showed the preferential formation of titanium silicide. Thick cobalt/titanium alloy films were also investigated as a potential interconnect and showed the possibility of using a cobalt-based alloy as a replacement for copper and barrier stack for the future generation of interconnects.
-
Development of nickel silicide for integrated circuit technology
… the performance significantly. Self-aligned silicide process was developed in mid eighties that allowed reduction of gate and contact resistance by using metal silicides as low resistivity materials. The process also enabled higher packing density. Many silicides have been extensively studied …
-
Manufacturing Design and Fabrication of 100 nm (Leff) CMOS Devices
A CMOS process for fabricating 100 nm CMOS devices has been developed. The Leff = 100 nm NMOS and PMOS transistors are the smallest ever that have been fabricated at RIT. The process is designed with Lpoly = 0.15 µm on 150 mm (6") Silicon wafers. The NMOS and PMOS transistors are designed to …
-
Hot isostatic pressing of titanium metal matrix composites for tribological applications
An investigation into developing titanium metal matrix composites (TMCs) for tribological applications while still possessing good mechanical properties has been performed using powder metallurgy (P/M) and hot isostatic pressing (HIP) process. TMCs were successfully synthesized using a wide range …