Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Tool Coating"”.

  1. Microdrilling of Biocompatible Materials

    … hole positioning accuracy and effect of AlTiN tool coating are experimentally determined. The experimental data trend agrees with classical Taylor's machining equation. Despite of fragile and long microdrills, the progressive pecking cycle and micromist allowed deep hole drilling on all the …

    tamu Repository record for Microdrilling of Biocompatible Materials (opens in a new tab)

  2. A Study on the Sustainable Machining of Titanium Alloy

    … compared to flood coolant machining. The tool wear was found to be unpredictable, and no significant difference was observed for dry and coolant machining. In a comparison of all the parameters, sustainable dry machining was found to provide better performance in machining Ti-6Al-4V.This …

    wku-diss Repository record for A Study on the Sustainable Machining of Titanium Alloy (opens in a new tab)

  3. Effects of milling methods, cooling strategies and end-mill coatings on machinability in high speed end-milling of Inconel- 718 using carbide end-mills

    … elevated temperature, high cutting forces, rapid tool wear and high chemical affinity with many cutting tools. Appropriate cooling strategies, milling methods, tool coatings and cutting speeds play important roles in addressing these problems. This research presents the results of the effects of …

    must-thes Repository record for Effects of milling methods, cooling strategies and end-mill coatings on machinability in high speed end-milling of Inconel- 718 using carbide end-mills (opens in a new tab)

  4. Tribometer-Based Quantifying of Friction in Metal Cutting

    … machining conditions experienced between a tool and workpiece ‘offline’ in order to reduce the number of real machining trials used to select a tool coating and subsequently optimize cutting parameters. This approach is based on the understanding that a change in the cutting speed can alter …

    mcmaster Repository record for Tribometer-Based Quantifying of Friction in Metal Cutting (opens in a new tab)

  5. Effect of feedrate, depth of cut, tool material, and toolpath on dimensional accuracy and surface roughness of milled CFRP

    … Polymers (CFRP) milling, like feedrate, tool material, and cutting speed. CFRP offers excellent material properties, which led to the increase of the material in today's manufacturing industry. CFRP offers up to 2.25 times steel's modulus of elasticity at about a fifth of the weight and …

    wvu Repository record for Effect of feedrate, depth of cut, tool material, and toolpath on dimensional accuracy and surface roughness of milled CFRP (opens in a new tab)

  6. A Computational Hybrid Method for Self-Intersection Free Offsetting of CAD Geometry

    Surface offsetting is a valuable tool used in Computer Aided Design (CAD). An offset surface is a collection of points that are at a constant distance from another surface. An offset surface is created in CAD by selecting a surface and then specifying the distance that the surface is to be offset. …

    byu Repository record for A Computational Hybrid Method for Self-Intersection Free Offsetting of CAD Geometry (opens in a new tab) Download PDF for A Computational Hybrid Method for Self-Intersection Free Offsetting of CAD Geometry (opens in a new tab)

  7. WEAR BEHAVIOUR OF COATED CARBIDE TOOLS DURING MACHINING OF Ti6Al4V AEROSPACE ALLOY

    … has a tendency to weld or stick to the cutting tool during machining, which results in chipping and premature tool failure. Their low thermal conductivity causes high temperatures to be generated at the tool/workpiece interface, affecting tool life adversely. Additionally, their high strength at …

    mcmaster Repository record for WEAR BEHAVIOUR OF COATED CARBIDE TOOLS DURING MACHINING OF Ti6Al4V AEROSPACE ALLOY (opens in a new tab)

  8. Simultaneous machining of aerospace structural materials using poly-drills

    … cost. Hence, an appropriate selection of tool geometry, tool materials and coatings, cutting speed, feed rate, and drilling machines is required to meet the requirements of machined parts. The large number of holes required for riveting means that their installation must be carried out in …

    edithcowan Repository record for Simultaneous machining of aerospace structural materials using poly-drills (opens in a new tab)

  9. Experimental Analysis of Finish Turning of Inconel 617

    … focuses on improving the surface integrity and tool life for turning of Inconel 617 for use in next-generation nuclear applications. Various machining parameters are tested to improve the finish and tool life such as the feed rate, cutting speed, and depth of cut. While the machining of popular …

    mcmaster Repository record for Experimental Analysis of Finish Turning of Inconel 617 (opens in a new tab)

  10. Technologické, ekonomické a ekologické aspekty obrábění za sucha

    Používání procesních kapalin zlepšuje průběh a výsledky obrábění, na druhé straně zvyšuje náklady a vyvolává problémy povahy ekologické a hygi-enické. V práci je postupně rozebrána analýza mechanismu tvorby třísky, prů-běh a distribuce tepla a teplotních polí stejně jako ekonomické a ekologické …

    brno-tech Repository record for Technologické, ekonomické a ekologické aspekty obrábění za sucha (opens in a new tab)

  11. Modes and Progression of Tool Deterioration and Their Effects on Cutting Force During End Milling of 718Plus Ni-based Superalloy Using Cemented WC-CO Tools

    Understanding the detailed progression of cutting tool deterioration and how deterioration affects cutting force (F) during milling of difficult-to-cut Ni-based superalloys is important for the improvement of machinability of the alloys. It also serves to clarify whether and how an F-based method …

    auckland-tech Repository record for Modes and Progression of Tool Deterioration and Their Effects on Cutting Force During End Milling of 718Plus Ni-based Superalloy Using Cemented WC-CO Tools (opens in a new tab)

  12. Influência dos parâmetros de usinagem na integridade da superfície e na geometria de engrenagens em aço inoxidável austenítico geradas por hobbing

    A fabricação de engrenagens cilíndricas em aço inoxidável austenítico representa um desafio tecnológico devido à sua elevada taxa de encruamento, alta ductilidade e baixa condutividade térmica, fatores que intensificam o desgaste da ferramenta e comprometem a qualidade superficial e geométrica do …

    brazil-ufrgs Repository record for Influência dos parâmetros de usinagem na integridade da superfície e na geometria de engrenagens em aço inoxidável austenítico geradas por hobbing (opens in a new tab)

  13. Frézování vnitřních závitů na tělesech vstřikovacích jednotek Bosch

    Tato diplomová práce se v úvodu zabývá různými druhy výroby závitů (zvláštní důraz je kladen na výrobu vnitřních závitu), odlišnými druhy nanášení otěruvzdorných povlaků metodami PVD a CVD, popsání jejich hlavních výhod a nevýhod. Poté jsou v práci vysvětleny jednotlivé mechanizmy a formy …

    brno-tech Repository record for Frézování vnitřních závitů na tělesech vstřikovacích jednotek Bosch (opens in a new tab)

  14. Povrchové úpravy nástrojů pro obrábění

    Bakalářská práce je zaměřena na povlakování řezných nástrojů. Na úvod bakalářské práce je zde přehled nástrojových materiálů. Dále teoretické rozebrání namáhání řezných nástrojů a zkoušky řezivosti. V závěru práce jsou popsány moderní trendy povlakování.

    brno-tech Repository record for Povrchové úpravy nástrojů pro obrábění (opens in a new tab)

  15. Zvyšování životnosti střižných nožů povlakováním

    Práce předkládá možnost zvýšení životnosti střižných nožů vyrobených z oceli 19 436, které se využívají pro výrobu statorových plechů z křemíkové oceli. Jeho vysoké množství výrazně zvyšuje tvrdost materiálu, což nepříznivě ovlivňuje životnost ostří nástroje. Po prozkoumání vhodných metod bylo …

    brno-tech Repository record for Zvyšování životnosti střižných nožů povlakováním (opens in a new tab)