Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Tool Path Planning"”.

  1. Automation of Shoe Last Modification and Tool Path Planning

    … with major deformities will require different tools than a foot that can be adequately fit with simple last measurement adjustments. The focus of this project is to create an improved system for custom last production that addresses the above issues. Tools for adjusting feet to the proper …

    waterloo Repository record for Automation of Shoe Last Modification and Tool Path Planning (opens in a new tab)

  2. Reconfiguration and tool path planning of hexapod machine tools

    Hexapod machine tools have the potential to achieve increased accuracy, speed, acceleration and rigidity over conventional machines, and are regarded by many researchers as the machine tools of the next generation. However, their small and complex workspace often limits the range of tasks they can …

    njit Repository record for Reconfiguration and tool path planning of hexapod machine tools (opens in a new tab)

  3. Decomposition of Manufacturing Processes for Multi-User Tool Path Planning

    … to work in parallel. Multi-user collaborative tool path planning software addresses the same serial limitations in tool path planning, thereby decreasing cost and increasing the quality of manufacturing processes. As part complexity increases, lead times are magnified by serial workflows. …

    byu Repository record for Decomposition of Manufacturing Processes for Multi-User Tool Path Planning (opens in a new tab) Download PDF for Decomposition of Manufacturing Processes for Multi-User Tool Path Planning (opens in a new tab)

  4. Web Based Automatic Tool Path Planning Strategy for Complex Sculptured Surfaces

    … the availability of powerful and low cost 3D tools, along with web-based technologies, provides interesting opportunities to the manufacturing community, with solutions directly implementable at the core of their businesses and organizations. The wooden sign is custom i.e. each sign is …

    waterloo Repository record for Web Based Automatic Tool Path Planning Strategy for Complex Sculptured Surfaces (opens in a new tab)

  5. Multiresolution analysis as an approach for tool path planning in NC machining

    … indicate that wavelet-based multiresolution tool path planning improves machining efficiency. Tool path length is reduced, sharp corners are smoothed out thereby reducing uncut areas and larger tools can be selected for rough-cuts.</p>

    iastate Repository record for Multiresolution analysis as an approach for tool path planning in NC machining (opens in a new tab)

  6. Automated Tool Path Planning for Industrial Robot in Material Handling in Warehouse Automation

    The warehouses today continue to rely on human workers because of the failure to implement the autonomous order picking system to meet the demands in terms of speed, safety and accuracy. In this research study, we aim to present an automated system specially designed to properly pick and place …

    texas-state Repository record for Automated Tool Path Planning for Industrial Robot in Material Handling in Warehouse Automation (opens in a new tab)

  7. Automated CNC Tool Path Planning and Machining Simulation on Highly Parallel Computing Architectures

    … used for designing CNC machine simulation and tool path planning algorithms. Then these algorithms were implemented and tested on a multi-GPU system. Performance evaluation of developed algorithms has shown great parallelizability and scalability; and that main algorithm properties are required …

    clemson Repository record for Automated CNC Tool Path Planning and Machining Simulation on Highly Parallel Computing Architectures (opens in a new tab)

  8. Closed-loop Tool Path Planning for Non-planar Additive Manufacturing and Sensor-based Inspection on Stationary and Moving Freeform Objects

    … by extruding material layer-by-layer using a tool path planning obtained from slicing programs by using CAD models as an input. Recently, there has been a growing interest in non-planar AM technologies, which offer the ability to fabricate multilayer constructs conforming to freeform surfaces. …

    vt Repository record for Closed-loop Tool Path Planning for Non-planar Additive Manufacturing and Sensor-based Inspection on Stationary and Moving Freeform Objects (opens in a new tab)

  9. Automated Tool Selection and Tool Path Planning for Free-Form Surfaces in 3-Axis CNC Milling using Highly Parallel Computing Architecture

    … to automatically select cutters and generate tool paths for all stages in 3-axis CNC Milling of free-form surfaces. Tools are selected and tool paths are planned in order to minimize the total machining time. A generalized cutter geometry model is used to define available cutters and an …

    south-carolina Repository record for Automated Tool Selection and Tool Path Planning for Free-Form Surfaces in 3-Axis CNC Milling using Highly Parallel Computing Architecture (opens in a new tab)

  10. Optimization of Three-Axis Vertical Milling of Sculptured Surfaces

    A tool path generation method for sculptured surfaces defined by triangular meshes is presented in this thesis along with an algorithm that helps determine the best type of cutter geometry to machine a specific surface. Existing tool path planning methods for sculptured surfaces defined by …

    waterloo Repository record for Optimization of Three-Axis Vertical Milling of Sculptured Surfaces (opens in a new tab)

  11. Experimental Evaluation of Contact Forces during Activities of Daily Living

    … of daily living. It uses off-the-shelf tools instrumented with a 6-DOF force/torque sensor, and to enable the robot to perform specific tasks. The first three tasks to be developed and tested are hair brushing, face wiping, and shaving. Two sets of trials were conducted: static trials to …

    guelph Repository record for Experimental Evaluation of Contact Forces during Activities of Daily Living (opens in a new tab)

  12. A STUDY ON THE DEVELOPMENT OF MAGNETICALLY DRIVEN INTERNAL FINISHING TECHNIQUE

    … finishing technology, i.e., the device and tooling, the theoretical modelling and the application. The developed MDIF may be applied in multi-axis machine centres so that complicated internal surface may be polished by appropriate tool path planning. The novel magnetic polishing tool breaks …

    nus Repository record for A STUDY ON THE DEVELOPMENT OF MAGNETICALLY DRIVEN INTERNAL FINISHING TECHNIQUE (opens in a new tab) Download file for A STUDY ON THE DEVELOPMENT OF MAGNETICALLY DRIVEN INTERNAL FINISHING TECHNIQUE (opens in a new tab)

  13. Automated tool path generation using the steepest directed isocusp method for 3-axis CNC machining of sculptured parts

    … these surfaces and their respective mold and die tooling. Research on tool path planning for sculptured surfaces using end-mills for 3-axis CNC milling have focused on five methods of tool path generation: isoparametric, surface­plane intersection, isocusp, steepest directed tree, and steepest …

    uvic Repository record for Automated tool path generation using the steepest directed isocusp method for 3-axis CNC machining of sculptured parts (opens in a new tab)

  14. A medial axis transformation based process planning method for rapid tooling

    … stir spot welding (FSSW) in a laminated rapid tooling process. The work combines a two-dimensional structural analysis with tool path planning to realize the overall process planning for the rapid tooling of a plastic injection mold. The work starts from a two-dimensional cantilever beam model, …

    iastate Repository record for A medial axis transformation based process planning method for rapid tooling (opens in a new tab)

  15. CNC tool path generation for finish milling convex pockets.

    … machine, part programs which define the cutting tool path are needed. This tool path is usually planned from computer-aided design (CAD) drawings, and converted to a computer-aided manufacturing (CAM) machine input format. However, several production bottlenecks are encountered in this …

    ottawa-retro Repository record for CNC tool path generation for finish milling convex pockets. (opens in a new tab)

  16. A New Approach to CNC Programming of Plunge Milling

    … of the researchers. Second, to optimize the tool path planning which has less attention. Therefore, in the first part of the research, a new practical approach is established in optimized procedures to generate the tool paths for plunge milling of pockets, even for these with free-form …

    concordia Download PDF for A New Approach to CNC Programming of Plunge Milling (opens in a new tab)

  17. Process planning for fixturing of custom machined implants

    <p>This thesis presents a process planning methodology for orienting and fixturing bone prior to the rapid machining of custom bone implants. The motivation is to automatically create custom bone implant fragments that will fill voids caused by extreme trauma. Fixturing can be one of the biggest …

    iastate Repository record for Process planning for fixturing of custom machined implants (opens in a new tab)

  18. Geometric process planning in rough machining

    <p>This thesis examines geometric process planning in four-axis rough machining. A review of existing literature provides a foundation for process planning in machining; efficiency (tool path length) is identified as a primary concern. Emergent structures (thin webs and strings) are proposed as a …

    iastate Repository record for Geometric process planning in rough machining (opens in a new tab)

  19. Iterative Learning Control and Extremum Seeking Control in Developing Tool Path for Minimal Cosine Error of 2D Surface

    … to solve the addressed challenges by proposing a tool path planning algorithm using an adaptive control scheme of Iterative Learning Control (ILC) combined with Extremum Seeking Control (ESC). The proposed scheme (ILESC) is suitable to address this problem because, unlike the classical control …

    tamu Repository record for Iterative Learning Control and Extremum Seeking Control in Developing Tool Path for Minimal Cosine Error of 2D Surface (opens in a new tab)

  20. Mold Feature Recognition using Accessibility Analysis for Automated Design of Core, Cavity, and Side-Cores and Tool-Path Generation of Mold Segments

    … segments with minimum cost using an efficient tool-path. The tool-path planning process also adds to the overall mold cost. The process of injection molding can be simplified and made to be more cost effective if the processes of mold design and tool-path generation can be automated. This work …

    waterloo Repository record for Mold Feature Recognition using Accessibility Analysis for Automated Design of Core, Cavity, and Side-Cores and Tool-Path Generation of Mold Segments (opens in a new tab)

Page 1 of 2