Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 411 for “"Tool Wear"”.

  1. Tool wear monitoring in face milling

    The purpose of this thesis is to investigate tool wear monitoring using Fourier Series simulation of steady state cutting forces. These simulations show that mean and fundamental values are all that is required to accurately predict immersion and tool wear (high frequency terms are ignored). It is …

    ubc Repository record for Tool wear monitoring in face milling (opens in a new tab) Download PDF for Tool wear monitoring in face milling (opens in a new tab)

  2. Tool Wear in End Milling Slots

    <p>This thesis records an investigation of tool wear in milling slots with carbide-tipped and high speed steel end milling cutters as well as the development of the equipment used. The study is limited to one conventional material (mild steel) and one difficult-to-machine alloy (multimet) only.</p> …

    mcmaster Repository record for Tool Wear in End Milling Slots (opens in a new tab)

  3. A new methodology for predictive tool wear

    Thesis (Ph. D.)--Michigan State University. Department of Materials Science and Mechanics, 2001

    msu Repository record for A new methodology for predictive tool wear (opens in a new tab)

  4. Predictive tool wear of coated tool systems

    Thesis (M.S.)--Michigan State University. Department of Materials Sciences and Mechanics, 1998

    msu Repository record for Predictive tool wear of coated tool systems (opens in a new tab)

  5. Multi-categories tool wear classification in micro-milling

    … where the cutting parameters are in micro scale. Tool condition monitoring (TCM) in micro milling poses new challenges compared to conventional machining, due to the high tool wear rate and high precision requirement associated with the dimensions to be produced at micro-level. First, the noise …

    nus Repository record for Multi-categories tool wear classification in micro-milling (opens in a new tab) Download file for Multi-categories tool wear classification in micro-milling (opens in a new tab)

  6. Tool Wear Modeling for Application to Gear Shaping

    Tool wear has a major impact on the productivity, economics, and sustainability of metal machining operations. While the topic of tool wear has been studied extensively for conventional metal cutting processes, like milling, turning, and drilling, there is a scarcity of studies in literature on …

    waterloo Repository record for Tool Wear Modeling for Application to Gear Shaping (opens in a new tab)

  7. The Micromechanisms of Cemented Carbide Cutting Tool Wear

    … to measure the materials loss from the cutting tools during machining. Using this technique, the contributions from mechanical and dissolution wear have been individually quantified, and the dominance of dissolution wear during the high speed machining of a medium carbon steel using uncoated …

    mcmaster Repository record for The Micromechanisms of Cemented Carbide Cutting Tool Wear (opens in a new tab)

  8. Tool wear mechanism of difficult-to-cut materials

    … first part of this study examines the flank wear mechanism in machining Titanium alloy Ti-6Al-4V (Ti64). Titanium alloys typically do not contain hard inclusion phases typically observed in other metallic alloys. However, characteristic scoring marks, in addition to more distinctive micro- …

    msu Repository record for Tool wear mechanism of difficult-to-cut materials (opens in a new tab)

  9. Local determination of tool wear during turning operations

    Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science, 1985

    msu Repository record for Local determination of tool wear during turning operations (opens in a new tab)

  10. PREDICTING MINING MACHINE CUTTING TOOL WEAR USING NEURAL NETWORKS

    … mines. However, the detection of worn cutting tools on these machines has remained a manual function performed by experienced operators. In this thesis, research into a method of automatically scheduling cutting tool replacement outages is described. Recurrent neural networks were used to …

    sask Repository record for PREDICTING MINING MACHINE CUTTING TOOL WEAR USING NEURAL NETWORKS (opens in a new tab)

  11. Modeling of Tool Wear and Tool Fracture in Micromilling

    … due to ease of use and accessibility of the tools. This research analyzes vibration of a high speed spindle and then studies micromilling of aluminum and titanium. Finite element analysis and tool modeling compliment experimental data. Cumulative tool wear based on Taylor model shows …

    tamu Repository record for Modeling of Tool Wear and Tool Fracture in Micromilling (opens in a new tab)

  12. Topographic imaging of tool wear in multilayer coated inserts

    Thesis (M.S.)--Michigan State University. Department of Mechanical Engineering, 2004

    msu Repository record for Topographic imaging of tool wear in multilayer coated inserts (opens in a new tab)

  13. Tool Wear Characterisation and Parameter Optimisation in Micro-manufacturing Processes

    … subtractive machining. Capability of machine tools has increased to allow highly intricate parts to be produced, but there are significant challenges in achieving excellent surface finish, geometrical accuracy and tool life. WEDM is appropriate for cutting complex shapes without long set-up …

    whiterose Download PDF for Tool Wear Characterisation and Parameter Optimisation in Micro-manufacturing Processes (opens in a new tab)

  14. IMPACT OF TRIBOSYSTEM COMPATIBILITY ON TOOL WEAR AND SURFACE INTEGRITY

    H13 tool steel is widely used in the mold and die industry. Due to tighter geometric tolerances and higher quality expectations, the use of hard machining has increased over the years. Hard machining refers to the machining of materials in their hardened state. The challenges with hard machining …

    mcmaster Repository record for IMPACT OF TRIBOSYSTEM COMPATIBILITY ON TOOL WEAR AND SURFACE INTEGRITY (opens in a new tab)

Page 1 of 21