Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Tool orientation"”.

  1. Surface Partitioning for 3+2-axis Machining

    … technique that uses the simplicity of 3-axis tool positioning and the flexibility of 5-axis tool orientation, to machine complex surfaces. This technique, 3+2-axis machining, divides a surface into patches and then machines each patch using a fixed tool orientation. The tool orientation and …

    waterloo Repository record for Surface Partitioning for 3+2-axis Machining (opens in a new tab)

  2. Real time trajectory generation and interpolation

    This thesis presents a continuous tool motion trajectory generation algorithm for high speed free form surface machining. A NURBS toolpath generation algorithm is presented to fit the discrete motion commands generated from free-form CAD-models. By using a NURBS representation of the machine part, …

    ubc Repository record for Real time trajectory generation and interpolation (opens in a new tab) Download PDF for Real time trajectory generation and interpolation (opens in a new tab)

  3. General parallel-leg mechanism : position analysis

    … of the legs (each leg has a length and two spin orientations) for a parallel leg mechanism in terms of a single variable. The only limitations imposed are the leg bases are all on the same reference plane and the tool orientation is normal to the mobile upper plate. This is done for a parallel …

    njit Repository record for General parallel-leg mechanism : position analysis (opens in a new tab)

  4. Design, prototype and control of a 3R1T robot with RCM for eye surgery

    … three rotational (3R) degrees of freedom for tool orientation and one translational (1T) degree of freedom for insertion was designed, prototyped and controlled. Forward and inverse kinematic models were developed, alongside singularity analysis and dimensional synthesis, confirming the …

    qu-belfast Repository record for Design, prototype and control of a 3R1T robot with RCM for eye surgery (opens in a new tab) Embargoed until 2031-07-31

  5. Multi-Axis Material Extrusion Additive Manufacturing of Continuous Carbon Fiber Composites

    … a software control system and deposition tool capable of multi-axis continuous carbon fiber reinforcement. The tool is required to have fiber cutting capability (a necessity for performing travel movements with continuous carbon fiber), in-situ control over fiber volume fraction, and a …

    vt Repository record for Multi-Axis Material Extrusion Additive Manufacturing of Continuous Carbon Fiber Composites (opens in a new tab)

  6. Smooth trajectory generation for 5-axis CNC machine tools

    … generation behaviour of modern CNC machine tools. Typically, CAM systems simulate machines’ motion based on the commanded feedrate and the path geometry. Such approach does not consider the feed planning and interpolation strategy of the machine’s numerical control (NC) system. In this …

    whiterose Download PDF for Smooth trajectory generation for 5-axis CNC machine tools (opens in a new tab)

  7. Toolpath and Cutter Orientation Optimization in 5-Axis CNC Machining of Free-form Surfaces Using Flat-end Mills

    Planning of optimal toolpath, cutter orientation, and feed rate for 5-axis Computer Numerical Control (CNC) machining of curved surfaces using a flat-end mill is a challenging task, although the approach has a great potential for much improved machining efficiency and surface quality of the …

    uvic Repository record for Toolpath and Cutter Orientation Optimization in 5-Axis CNC Machining of Free-form Surfaces Using Flat-end Mills (opens in a new tab)

  8. Development of a Mechatronics Instrument Assisted Soft Tissue Mobilization (IASTM) Device to Quantify Force and Orientation Angles

    … Technique(Model GT3), which is a frequently used tool to clinically deliver localize pressure to the soft tissue. The first design is based on compression load cells, where 4-load cells are used to measure the force components in three-dimensional space. The second design uses a 3D load cell, …

    iupui Repository record for Development of a Mechatronics Instrument Assisted Soft Tissue Mobilization (IASTM) Device to Quantify Force and Orientation Angles (opens in a new tab)

  9. Virtual blade machining

    … from the cutter-blade engagement maps along the toolpath. The forces are applied on the blade to predict the forced vibrations and chatter stability at each tool location. A simplified method to update the cutter-workpiece engagement is used to obtain the three-dimensional stability lobe diagram …

    ubc Repository record for Virtual blade machining (opens in a new tab) Download PDF for Virtual blade machining (opens in a new tab)

  10. Feedrate optimization with contouring error and drive constraints in five-axis machining

    … Computer Numerical Controlled (CNC) machine tools are used to machine parts with complex, curved surfaces. When the reference toolpath contains frequencies beyond the bandwidth of the servo drive, the actual axis position lags the reference position commands which leads to axis tracking …

    ubc Repository record for Feedrate optimization with contouring error and drive constraints in five-axis machining (opens in a new tab) Download PDF for Feedrate optimization with contouring error and drive constraints in five-axis machining (opens in a new tab)

  11. Smooth trajectory generation and precision control of 5-axis CNC machine tools

    … control algorithms developed for 5-axis machine tools. A feedrate scheduling algorithm has been introduced to minimize the cycle time for 5-axis machining of curved tool-paths. The variation of the feed along the tool-path is expressed in a cubic B-spline form as a function of the arc …

    ubc Repository record for Smooth trajectory generation and precision control of 5-axis CNC machine tools (opens in a new tab) Download PDF for Smooth trajectory generation and precision control of 5-axis CNC machine tools (opens in a new tab)

  12. Optimization of machining strategy and process planning of complex geometry

    … of these geometries consists of automatic tool path generation for multi-axis computer numerically-controlled machining centers. The conformity of the manufactured geometry to the design requirements depends on several factors. These involve cutting tool selection, positioning of the …

    mcmaster Repository record for Optimization of machining strategy and process planning of complex geometry (opens in a new tab)

  13. Cycle Time Reduction of 5-axis Laser Drilling via Time-optimal Trajectory Generation and Sequence Optimization

    … traverse) + TRAORI (5-axis transformation and tool orientation retaining tactic) commands. To be practically beneficial, time-optimal trajectory generation strategies discussed in this thesis is focused on closely estimating these CNC controller’s behaviors. A total of four strategies are …

    waterloo Repository record for Cycle Time Reduction of 5-axis Laser Drilling via Time-optimal Trajectory Generation and Sequence Optimization (opens in a new tab)

  14. Trajectory planning along continuous paths subject to process constraints

    … safe and smooth tra jectories of a robot tool moving along a specified curve subject to application constraints. The application constraints include geometric constraints (allowable orientation and po sition of the tool) and motion constraints (joint limits, robot configuration inversions …

    ubc Repository record for Trajectory planning along continuous paths subject to process constraints (opens in a new tab) Download PDF for Trajectory planning along continuous paths subject to process constraints (opens in a new tab)

  15. In-situ monitoring and intermittent controller for adaptive trajectory generation during laser directed energy deposition via powder feeding

    … feedstock properties, system configuration, tool-path generation, etc. Among the above, trajectory control is one of the emerging and active areas of research. Generally, trajectories are developed offline for printing the parts. However, some of the major challenges involved in conventional …

    waterloo Repository record for In-situ monitoring and intermittent controller for adaptive trajectory generation during laser directed energy deposition via powder feeding (opens in a new tab)

  16. Determining Upper Extremity Posture Using a Simplified Marker Configuration for Biomechanical Risk Evaluation during Tool Use

    … the accuracy when calculating upper extremity orientations. One modification of the method was that anatomical planes were calculated by defining orthogonal axes at the chest and rotating the axes to account for the slope of the chest. By defining the anatomical axes using anatomical landmarks …

    uconn-diss Repository record for Determining Upper Extremity Posture Using a Simplified Marker Configuration for Biomechanical Risk Evaluation during Tool Use (opens in a new tab)

  17. Job insecurity, job satisfaction and general health in a higher education institution

    … Questionnaire, An Organisation Stress Screening Tool, Orientation to Life Questionnaire, and General Health Questionnaire, and a biographical questionnaire were utilised. Statistical analyses were carried out for the three articles in the study with the help of the Statistical Package for Social …

    nwu-za Repository record for Job insecurity, job satisfaction and general health in a higher education institution (opens in a new tab)

  18. Vývoj a realizace technického prostředku pro metodu Snoezelen

    Tato bakalářská práce se zaměřuje na vývoj podpůrného terapeutického nástroje pro metodu Snoezelen, která slouží k smyslové terapii. Nástroj se skládá ze dvou bezdrátově propojených vestavěných zařízení a desktopové aplikace pro monitorování a ovládání. Vývoj začal konzultacemi s terapeutem, na …

    brno-tech Repository record for Vývoj a realizace technického prostředku pro metodu Snoezelen (opens in a new tab)

  19. Intelligent Fastening Tool Tracking Systems Using Hybrid Remote Sensing Technologies

    … on the development of intelligent fastening tool tracking systems for the automotive industry to identify the fastened bolts. In order to accomplish such a task, the position of the tool tip must be identified because the tool tip position coincides with the head of the fastened bolt while …

    waterloo Repository record for Intelligent Fastening Tool Tracking Systems Using Hybrid Remote Sensing Technologies (opens in a new tab)