Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"Top-contact"”.
-
Top-Contact Lateral Organic Photodetectors for Deep Ultraviolet Applications
… semiconductor layers are sandwiched between top and bottom electrodes that provide electrical contact. More recently, an interest in utilizing a lateral device architecture instead of the vertical one, has emerged. In this architecture, the two contacts are positioned on the two sides of the …
-
Optimization of Top Contact for Cu(In,Ga)Se2 Solar Cells
As world energy demands continue to increase, the need to generate electricity from a broader variety of sources, including renewables, is more critical than ever. With costs still 30% higher than those of natural gas, solar energy is a viable contender, but more progress is needed to level the …
-
Feasibility of large-scale fabrication of flexible solar cells with graphene electrodes
… samples involving monolayer graphene. These top contact samples included indium tin oxide, wet etched graphene, silver nanowire coated graphene, and dry transfer graphene. Using a custom prepared 1 in² CuInSe₂ nanocrystal (CIS NC) solar cell substrate, each individual top contact was tested. …
-
Photoelectron Spectroscopy on Doped Organic Semiconductors and Related Interfaces
… is present there. The investigation of metal top and bottom contacts aims at understanding the asymmetric current-voltage characteristics found for some symmetrically built device stacks. It can be shown that a reaction between the atoms from the top contact with the molecules of the layer …
-
Theoretical Investigation of Contact Effects on the Performance of 2D-Material Nanotransistors
… such as unintentional doping, defects, and poor contact properties. In this study, some of the promising 2D materials, such as black phosphorus (BP) and molybdenum disulfide (MoS₂), and their electronic devices are studied. In particular, the contact effects on the performance of 2D material …
-
Materials interface engineering in perovskite photovoltaics
… developing the first crosslinked hole-extraction top contact with the goal of obviating degradation of the underlying perovskite. A remote-doping strategy introduces the needed hole conductivity. The new top contact produces an insoluble and heat-resistant protecting interlayer that is …
-
III-V Nanowire Array Solar Cells: Optical and Electrical Modelling
… optical response of a nanowire array subcell on top of a planar silicon subcell was thenconsidered. For the optimized geometry with approximately 15 nanowires per square μm, a conformal top contact of transparent conductive oxide led to large absorption losses. It was found that a scheme with a …
-
Development of the Visible Light Photon Counter for Applications in Quantum Information Science
… of the incident photons are absorbed within the top contact of the device, whereas, in the infrared, Si is practically transparent. A number of applications in quantum information science would benefit from use of the VLPC if the QE was improved in the ultraviolet (e.g., state detection of …
-
A comparison of photovoltaic device performance between copper indium gallium diselenide thin film solar cells with indium tin oxide and indium molybdenum oxide top contacts
… type of transparent conductive oxide (TCO) top contact. One of the sets utilized a conventional TCO such as Indium Tin Oxide (ITO) where the other used a more cutting-edge high mobility TCO (HMTCO) such as Indium Molybdenum Oxide (IMO). Based off reduced free-carrier absorption that has been …
-
Electrochemically directed self-assembly and conjugated polymer semiconductors for organic electronic applications
… and second, the possibility of using them as a top contact on the self-assembled monolayers (SAMs) for molecular electronic applications. Throughout this work, deposition of the organic materials was performed on prefabricated device structures that required no further lithographic or metal …
-
Study of pumping conditions on output of optically pumped interband cascade lasers.
… to the effect of apply a graphene monolayer top contact to the ICL surface.
-
Manipulation of electrical resistivity and optical properties of zinc oxide thin films grown by pulsed laser deposition and the Sol-Gel method
… growth parameters were applied to create a TCO top contact to nanorod structures that are potentially useful as solar cell devices. The application of this optimized film offers future work possibilities to perfect a promising up and coming device.
-
Roll-to-roll processing of ITO-free organic solar cells
… solution processable metal inks deposited as a top contact. A printed top grid contact is attractive as vacuum processing of such a grid contact as used in the laboratory process would be too expensive. However for the OSCs where the top contact was thermally evaporated under vacuum, device …
-
Schottky Barrier Extraction From I-V Characteristics Using Mathematical Model
Schottky barriers are an important aspect of contact engineering for any application where one is formed. Its important to study the formation of schottky barriers for different material combinations as well as the implications of using 2D semiconductor materials as part of a junction. Extraction …
-
Modeling Heterogeneous Carbon Nanotube Networks for Photovoltaic Applications Using Silvaco Atlas Software
… path for charge carriers to travel to the top contact grid lines. These properties can decrease the required area of a solar cell covered by metal contacts, allowing a greater amount of light input. The metal contacts which transport charge carriers to the edge of the device can also be …
-
Cu2ZnSnS photovoltaics
… of a soda lime glass as the substrate, Mo back contact, CZTS absorber layer, CdS window layer, ZnO high resistive transparent layer, and the top contact ITO. Energy dispersive spectroscopy was used to determine the compositions of CZT and CZTS. A 4-point probe technique was used to measure the …
-
Modification and Scaling of Metal Contacts to 2D Materials Using an In-Situ Argon Ion Beam
… difficulty is the formation of high-quality contacts as the performance of the 2D transistors heavily relies on carrier injection through the contact interfaces. Although some progress has been made in recent years, a robust, effective contact scheme is still lacking and keeps the materials …
-
Electrical Characterization of Ruthenium Dioxide Schottky Contacts on GaN
… important uses in electronics, especially as the top contact in to solar cells where efficient transmission of light and low electrical resistivity allow for higher efficiency solar cells and as the gate contact in AlGaN/GaN HFET's allowing for optical characterization of the subsurface transistor …
-
Developing non-invasive processing methodologies and understanding the materials properties of solution-processable organic semiconductors for organic electronics
… of TES ADT post device processing. Bottom-contact thin-film transistors with annealed TES ADT routinely exhibit an average charge-carrier mobility of 0.1 cm 2 /V-s, which is sufficient to drive backplane circuitry in flexible display applications. Additionally, we demonstrated that the …
-
Organic:inorganic heterojunctions for photovoltaic devices.
… up on F:TO coated glass slides and electrical contacts were made by DC sputtering platinum fingers on the top. The best device design gave a fill factor of 35.5%, and an overall conversion efficiency of 4.2x10[-3]%. Devices were thought to be greatly affected by series resistance from the top …
Page 1 of 4