Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 37 for “"Torque Angle"”.

  1. Torque -Angle Based Analysis and Control of Induction Machines

    … field-oriented control (FOC), and direct-torque control are the most popular induction motor control methods. One common feature that is shared by these control methods is to regulate the amplitude of the flux in the induction motor. There are numerous techniques to improve the …

    uiuc Repository record for Torque -Angle Based Analysis and Control of Induction Machines (opens in a new tab)

  2. A Comparison Of Morse Taper And Sloped Shoulder Abutment Geometries Using Torque Angle Analysis

    … however, many of these papers only report torque and de-torque values. Generally, torque values recommended by the manufacture are between 65-75% of that abutment screws yield potential, or in other words, the point at which the abutment screw will fracture. But a key concept to understand …

    umn Repository record for A Comparison Of Morse Taper And Sloped Shoulder Abutment Geometries Using Torque Angle Analysis (opens in a new tab)

  3. In Vivo Vastus Lateralis Fascicle Excursion During Speed Skating Imitation

    … was to determine possible changes in the torque-angle relationship in speed skaters caused by preseason training and the potential differences in the torque-angle relationship between sub-elite speed skaters and strength-trained control subjects. In the first study, we recruited 16 long …

    calgary Repository record for In Vivo Vastus Lateralis Fascicle Excursion During Speed Skating Imitation (opens in a new tab)

  4. Digital current loop control of a brushless DC motor

    … dc machine requires the control of the motors torque angle. This thesis proposes digital control schemes for torque angle control, presents a simulation of the motor system with the schemes implemented, and concludes that digital schemes are more advantageous than analog control schemes, in the …

    dcu Download PDF for Digital current loop control of a brushless DC motor (opens in a new tab)

  5. The analysis and design of brushless DC motors

    … performance parameters, such as the torque-angle curve, detent torque-angle curve, torque constant, back emf constant and inductance are discussed in detail. It is shown that three-dimensional effects can make significant contributions to the motor inductance, making inductance …

    unh-thes Repository record for The analysis and design of brushless DC motors (opens in a new tab)

  6. Torque Characterization of Permanent Magnet and Synchronous Reluctance Machines

    … magnet synchronous machine (PMSM) with improved torque utilization, is presented. Three different machine design softwares, namely MotorSolve, MagNet, and MagneForce are used to characterize the machines. This thesis initially presents the characterization of a 7.5 hp variable-flux permanent …

    concordia Download PDF for Torque Characterization of Permanent Magnet and Synchronous Reluctance Machines (opens in a new tab)

  7. A Vector Controlled Drive for Parameter Evaluation of Variable Flux Machines

    … the pulse duration, the more severe is the torque ripple. For high-performance drives, consideration of cross-magnetization effects is required. Therefore, this thesis proposes a vector controlled technique to evaluate the cross-magnetization effects in variable flux machines. The proposed …

    concordia Download PDF for A Vector Controlled Drive for Parameter Evaluation of Variable Flux Machines (opens in a new tab)

  8. Influence of Morse taper angle and abutment material on preload development in dental implants

    … design, abutment geometry, and the efficiency of torque transfer into preload. Preload, the clamping force created by the elastic recovery of the abutment screw after torque application, is critical for maintaining the implant-abutment connection. However, it is well documented that up to 90% of …

    umn Repository record for Influence of Morse taper angle and abutment material on preload development in dental implants (opens in a new tab)

  9. The Influence of Cyclic Loading on the Extensibility of Human Hamstring Muscle-Tendon Units in Vivo

    … moved the knee joint into extension until torque reached 85% of maximal passive resistance torque measured in the passive knee extension test. The control group sat quietly relaxed during the intervention period. Measurements of hamstring passive extensibility using the PKE test were …

    auckland-tech Repository record for The Influence of Cyclic Loading on the Extensibility of Human Hamstring Muscle-Tendon Units in Vivo (opens in a new tab)

  10. Design of a dual-excited synchronous machine and development of stabilization techniques

    … used in both the direct and quadrature fields. Torque angle, speed, power and terminal current signals are compared in their damping action. The response is also calculated from a ninth order mathematical model. It is found that the shaft speed is the best supplemental signal and that the direct …

    ubc Repository record for Design of a dual-excited synchronous machine and development of stabilization techniques (opens in a new tab) Download PDF for Design of a dual-excited synchronous machine and development of stabilization techniques (opens in a new tab)

  11. Design of High-Efficiency Rare-Earth Permanent Magnet Synchronous Motor and Drive System

    … decease much. In traditional machine design, the torque angle is designed to be in the range of 15 to 30 degrees at the rated power and speed. In our high efficiency motor design, we propose to use much lower torque angle of 2 to 15 degrees at the rated power and speed. Such design can effectively …

    ucf Repository record for Design of High-Efficiency Rare-Earth Permanent Magnet Synchronous Motor and Drive System (opens in a new tab)

  12. Neurophysiologic Bases for Abnormal Muscle Coactivation Patterns in Hemiparetic Stroke

    … We observed significant shifts in the peak EMG angle and increases in the angular range of EMG activity in the impaired upper limb. Furthermore, we observed stereotypic coactivation of many muscles acting at the same joint or at different joints across all subjects. The effect of elbow angle …

    loma-linda Repository record for Neurophysiologic Bases for Abnormal Muscle Coactivation Patterns in Hemiparetic Stroke (opens in a new tab)

  13. Analysis of lower limb injury prevention programmes in relation to hamstring and anterior cruciate ligament risk factors in team sport athletes

    … programmes on hamstring strength and torque angle relationship. The results revealed that although both programmes increased hamstring strength, the effect of interventions on knee flexors torque-angle relationship was significantly different. Therefore, a systematic review of …

    greenwich Download PDF for Analysis of lower limb injury prevention programmes in relation to hamstring and anterior cruciate ligament risk factors in team sport athletes (opens in a new tab)

  14. A dynamic test model for power system stability and control studies

    … fault and clear sequence switchings, an accurate torque angle deviation transducer (Chapter 2), and analogs to realize conventional stabilization and nonlinear optimal control (Chapter 5). Three state variable mathematical models of the test model with various degrees of detail are derived in …

    ubc Repository record for A dynamic test model for power system stability and control studies (opens in a new tab) Download PDF for A dynamic test model for power system stability and control studies (opens in a new tab)

  15. Gate-Turn-Off thyristor commutation of DC machines : The development of a rotating DC machine with static commutation of armature coil current using Gate-Turn-Off thyristor devices.

    … of the main field winding, giving the optimal torque angle of 000. Provision Is made, however, within the digital control circuit for controlled departure of the armature switch tapping points from the quadrature axis positions, and the effect of this, In Improving commutation Is Investigated. …

    bradford Repository record for Gate-Turn-Off thyristor commutation of DC machines : The development of a rotating DC machine with static commutation of armature coil current using Gate-Turn-Off thyristor devices. (opens in a new tab)

  16. HALHAM°: a Novel Device for Nordic Hamstring Exercise Assessment

    … of modifying and measuring the knee flexors torque-length relationship across Nordic hamstring exercise inclinations, preferentially targeting the biceps femoris long head at longer muscle lengths while maintaining similar torque. A prototype system (namely the HALHAM°) was engineered to …

    sheffield-hallam Repository record for HALHAM°: a Novel Device for Nordic Hamstring Exercise Assessment (opens in a new tab) Download PDF for HALHAM°: a Novel Device for Nordic Hamstring Exercise Assessment (opens in a new tab)

  17. The Effect of Casting Motion to Mobilize Stiffness on Proximal Interphalangeal Joint Motion and Stiffness

    … pattern. Baseline measurements of active motion, torque range of motion and speed of manipulation using the Minnesota Manual Dexterity Test were completed for two weeks preceding the treatment. The treatment of casting motion to mobilize stiffness was then carried out over a six week period, …

    auckland-tech Repository record for The Effect of Casting Motion to Mobilize Stiffness on Proximal Interphalangeal Joint Motion and Stiffness (opens in a new tab)

  18. Magnetic Gear Electric Continuously Variable Speed Transmission (ECVT) for Helicopter Application

    … Transmission (MECVT) systems. A theoretical torque model is developed to characterize the magnetic coupling between inner and outer rotors through a ferromagnetic modulator. This model captures the sinusoidal torque–angle relationship based on pole pair configurations and material properties. …

    utk-theses Repository record for Magnetic Gear Electric Continuously Variable Speed Transmission (ECVT) for Helicopter Application (opens in a new tab)

  19. Dynamic power system modelling and linear optimal stabilization design using a canonical form

    … best dynamic model of a synchronous machine with torque angle, speed, electric output power, terminal voltage or current and field voltage or current as the state variables is derived. The model is used for supplemental excitation control and linear optimal control designs. For the former not only …

    ubc Repository record for Dynamic power system modelling and linear optimal stabilization design using a canonical form (opens in a new tab) Download PDF for Dynamic power system modelling and linear optimal stabilization design using a canonical form (opens in a new tab)

Page 1 of 2