Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 36 for “"Torque ripples."”.
-
TOPOLOGY AND GENERATIVE OPTIMIZATION OF SWITCHED RELUCTANCE MACHINES FOR TORQUE RIPPLES AND RADIAL FORCE REDUCTION
… temperatures. However, acoustic noise and high torque ripples, in addition to the relatively low torque density, present significant challenges. Geometry and topology optimization are applied to overcome these challenges and enable SRMs to compete with PMSMs. Key geometric design parameters are …
-
Electromagnetic Performance of Consequent Pole Permanent Magnet Machines, with Particular Reference to Analysis and Minimization of Torque Ripples
… permanent magnet (PM) while produce comparable torque as conventional surface-mounted PM (SPM) machines. However, due to the unbalanced features between north and south poles, i.e. PM and iron poles, the presence of a large torque ripple can hinder their adoption in some applications. …
-
Machine Learning Algorithms for Multi-objective Design Optimization of Switched Reluctance Motors (SRMs)
… electric motors. However, SRMs face high torque ripples, vibration, acoustic noise, and nonlinear modeling complexities. Through careful geometry design optimization, these drawbacks can be mitigated. Design optimization for SRMs is a multi-objective and nonlinear problem that requires an …
-
Torque pulsations minimization in PM synchronous motor drive
… for high-performance servo applications where torque smoothness is an essential requirement. However, parasitic torque pulsations do exist in PMSM drive. A consequence of these torque ripples is speed oscillations that deteriorate the drive performance at low speeds. In this thesis, learning …
-
Control of current harmonics in dual three-phase permanent magnet synchronous machine systems
… (DTP) PMSMs exhibit higher power rating, power/torque sharing capability, and fault-tolerant capability, as well as lower torque ripples. They also maintain the merits of PMSMs, i.e. high power density, high torque density, and high efficiency. However, the major current harmonics are only …
-
IDENTITY CONTROL OF SYNCHRONOUS RELUCTANCE MOTORS
… report focuses on the research in the area of torque control of Synchronous Reluctance (SynRel) motors. The study is aimed at contributing towards the minimization of torque ripples in a current-controlled motor drive system. Identity Control, a new form of current or torque control, based on …
-
High-performance torque control of switched reluctance motor
Motor torque ripples may cause speed ripples at low speed operation. Switched Reluctance Motor (SRM) produces excessive torque ripples due to discrete excitation of phase windings and its non-linear magnetization characteristics. A new polynomial model in phase current and rotor position is …
-
BLDC Motor Modelling and Control - A Matlab®/Simulink® Implementation
… each motor type and their validity is verified. Torque-, speed- and position control is applied using hysteresis band control, pwm control, and variable dc-link voltage control. The different control strategies are tested on the bldc motor and their performance evaluated. The frequency content of …
-
DESIGN AND ANALYSIS OF A SLOTLESS PERMANENT MAGNET MOTOR
… DC motors. These motors require high starting torque, low non-repeatable runout, low contamination, high resonant frequencies, low vibrations and low noise. Each of these specifications has to be tested on it's own; special jigs, fixtures and tastings have to be designed and constructed in …
-
Position estimation of IMSM using fundamental PWM excitation and its application in sensorless control
… lower current distortion, smaller current and torque ripples, power loss and lower acoustic noise compared to other saliency tracking sensorless control methods. However, the high frequency oscillations caused by parasitic effects when the switching devices change state prevent the immediate …
-
Wind energy and power system interconnection, control, and operation for high penetration of wind power
… to suppress rotor-current overshoots and torque ripples during grid faults. A dynamic stochastic optimal power flow control scheme is proposed to optimally reroute real-time active and reactive power flow in the presence of high variability and uncertainty. The performance of the proposed …
-
Control of Asymmetric Permanent Magnet Synchronous Generator Systems
… second harmonic (2h) power, DC bus voltage and torque ripples. The asymmetries include the unbalanced resistances, unbalanced inductances, and unbalanced 3-phase back-electromotive forces (EMFs). The mathematical model of the general asymmetries in the PMSG system is firstly presented. The power …
-
Equivalent Linear Model Based Torque Control and Performance Improvement For Switched Reluctance Motor (SRM) Drives
… environments. However, the inherent pulsative torque and radial force lead to the well-known torque ripples and acoustic noise issues. Although there are numerous advanced methods to address the above two issues, the high nonlinearity inevitably brings difficulties in controlling the SRMs. …
-
Design Optimization of Switched Reluctance Motors Using Deep Learning
… low manufacturing costs, simple structure, high torque-to-inertia ratio, and minimal maintenance. However, they have high torque ripples due to the salient nature of the stator and rotor poles. To address this problem, this thesis applies a Deep Learning optimization approach to minimize the …
-
Precision Control of High Speed Ball Screw Drives
… rigid body dynamics, nonlinear friction, torque ripples, axial and torsional vibrations, lead errors, and elastic deformations. Adaptive Sliding Mode Controller (ASMC) is designed based on the rigid body dynamics and notch filters are used to attenuate the effect of structural resonances. …
-
Modeling and Validation of a Fault Mitigation Method in Induction Motor-Drive Systems Using Magnetic Equivalent Circuits
… motor line currents, and significantly reduce torque ripples, even when the machine runs under the aforementioned two-phase open-delta faulty operating condition. This condition is analyzed using a Magnetic Equivalent Circuit (MEC) model. This model is developed for a delta-connected induction …
-
Adaptive dynamic programming methods for tracking current control of switched reluctance motor drive
… current controllers have large current ripples that increase torque ripples and acoustic noise, optimal tracking controllers using reinforcement learning (RL) approaches are introduced as an alternative adaptive technique for SRM drives. The proposed optimal tracking controllers can …
-
On the different magneto-mechanical waves in faulty induction motors
… existing between saturation harmonics and torque ripples. Secondly, I have been studying the interaction between skew in induction motors and the magnitude of the saturation harmonics existing in the stator currents. Thirdly, I have been able to successfully model a motor suffering from …
-
Comparison of control strategies for squirrel-cage induction generator-based wind energy conversion systems
… systems. For this type of generator, direct torque control, direct stator-field-oriented control, direct rotor-field-oriented control, stator-flux slip control and rotor-flux slip control can be used for maximum power point tracking. Stator-flux slip control and direct torque control have …
-
Universal Position-Sensorless Control for Switched Reluctance Motor Drives
… current results in additional copper loss and torque ripples. This problem is overcome in the thesis by regulating the magnitude of induced current at a minimal level. The induced current regulator is designed as a terminal sliding-mode con-troller that adjusts the injection voltage online over …
Page 1 of 2