Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 108 for “"Total temperature"”.
-
Computational Modeling of Total Temperature Probes
… of CFD as a tool in the design and analysis of total temperature probes. Simulations were completed using 2D axisymmetric and 3D geometry of stagnation total temperature probes using ANSYS Fluent. The geometric effects explored include comparisons of shielded and unshielded probes, the effect of …
-
Computational Modeling of Radiation Effects on Total Temperature Probes
The requirement for accurate total temperature measurements in gaseous flows was first recognized many years ago by engineers working on the development of superchargers and combustion diagnostics. A standard temperature sensor for high temperature applications was and remains to be the …
-
A Low Order Aerodynamic Model of Embedded Total Temperature Probes
Measurement of the total conditions downstream of fans is of primary importance to aeroengine development. Historically, these measurements have been acquired with the use of traditional total condition probes mounted to the guidevanes or engine cowling; however, such a setup can have significant …
-
An Experimental Conduction Error Calibration Procedure for Cooled Total Temperature Probes
The accurate measurement of total temperature in engine diagnostics is a challenging task which is subject to several sources of error. Conduction error is predominant among these sources since total temperature sensors are embedded into a cooled strut for measurement. This study seeks to …
-
Mount Interference and Flow Angle Impacts on Unshielded Total Temperature Probes
Accurately measuring the total temperature of a high-speed fluid flow is a challenging task that is required in many research areas and industry applications. The difficulty in total temperature measurement generally stems from attempting to minimize measurement error or accurately predict error so …
-
Total Temperature Probe Performance for Subsonic Flows using Mixed Fidelity Modeling
An accurate measurement of total temperature in turbomachinery flows remains critical for component life models and cycle performance optimization. While many techniques exist to measure these flows, immersed thermocouple based probes remain highly desirable due to well established practices for …
-
A Computational Study of Compressor Inlet Boundary Conditions with Total Temperature Distortions
… from the investigation indicate that both total pressure and velocity boundary conditions at the compressor face are made non-uniform by the upstream thermal distortion, while static pressure remains nearly constant. Total pressure at the compressor face was found to vary on the order of …
-
Impact of Total Temperature Probe of Geometry on Sensor Flow and Heat Transfer
The measurement of temperature in hot gases plays an important role in many engineering applications, such as the efficiency and performance of an engine. As such, understanding the accuracy of these temperature measurements is also important. One of the common ways in which temperature is measured …
-
The Turbulence Structure of Heated Supersonic Jets with Offset Total Temperature Non-Uniformities
… in radiated noise. To investigate the impact of temperature on the turbulence development in the jet, spatially resolved three-component velocity vectors were acquired using particle image velocimetry (PIV) performed on two small-scale perfectly expanded Mach 1.5 jet flows, one with a uniform …
-
Time-resolved stagnation temperature and pressure measurements in the vortex street behind a cylinder
… revealed the prospect that the instantaneous total temperature is nonuniform around vortices. For low Mach number flows, the instantaneous total pressure was also shown to become nonuniform in such a similar manner that the near-wake patterns of instantaneous total pressure exhibit almost …
-
MODELING AND ANALYSIS OF TURBOJET COMPRESSOR INLET TEMPERATURE MEASUREMENT SYSTEM PERFORMANCE
… measurement of turbine engine compressor inlet total temperature is paramount for controlling engine speed and pressure ratio. Various methods exist for measuring compressor inlet total temperature on turbojet engines with hydromechanical control. One method involves the use of an …
-
An Experimental Study of Temperature Separation in Swirling Flow
… to form, accompanied by an almost uniform total temperature distribution in the radial direction except for a dip near the vortex core; when the vortex whistle emerged by the removal of the restriction, a forced vortex was formed, accompanied by an almost linear distribution of total …
-
Hypersonic boundary layer instability measurements at low and high angles of attack
… the effects of angle of attack, wall-to-total temperature ratio, and freestream disturbance levels on hypersonic boundary layer instabilities at Mach 7. The motivation was to improve the understanding of hypersonic boundary layer instabilities and inform numerical transition models so …
-
Measurements of pressure and thermal wakes in a transonic turbine cascade
The effects of freestream turbulence on the total pressure and total temperature in the wake of a cooled transonic turbine cascade with heated flow are presented in this thesis. The experiment was conducted in the Virginia Tech Cascade Wind Tunnel. A dual hot wire aspirating probe was used to make …
-
Acoustic Streaming as a Mechanism of the Ranque-Hilsch Effect
… of the Ranque-Hilsch tube, the mechanism of the total temperature separation, in the absence of any apparent external work, has not satisfactorily been resolved.</p> <p>Previously the mechanism has been purported to be due to the turbulent motion. However, if this were the mechanism, one could …
-
The Effect of Thermal Non-Uniformity on Coherent Structures in Supersonic Free Jets
… the engine and nozzle. Prior work has shown that total temperature non-uniformity is a noise reduction technique which introduces a stream of cold flow into the heated jet. This method has been shown to cause changes in the exhaust plume and result in a 2±0.5 dB reduction of peak sound pressure …
-
A study of moderately underexpanded single and twinjet rocket exhaust plumes in quiescent and in a mach 7 hypersonic freestream
… the shear layer was deduced using a new Oxford Total Temperature Probe. With the freestream stagnation temperature at approximately 650 K and injected gas at 350 K, a linear variation for the deduced total temperature across the shear layer was obtained. This was consistent with the Pitot …
Page 1 of 6