Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 51 for “"Traction Applications"”.
-
Soft-switching solid-state transformer for traction applications
Conventionally, power converters in traction systems interface with the medium-voltage (MV) catenary through a low-frequency transformer (LFT) operating at 16.7 Hz/50 Hz/60 Hz. The LFT converts the MV AC to low-voltage (LV) AC where low-voltage-rated power electronics are used to convert the LV AC …
-
Design of High Power Density Inverters for Traction Applications
… switching loss, and faster switching speeds in traction inverters. However, these devices also present thermal challenges and over voltage spikes causing EMI, switching losses and device breakdown due to high di/dt during high-frequency operations. This thesis work addresses these challenges by …
-
Analysis and control of an IPMSM for traction applications
Thesis (Ph. D.)--Michigan State University. Electrical Engineering, 2010
-
Resonant DC link converters and their use in rail traction applications
… may occur when usingpower converters in the rail traction environment. Particular attention is given to the ResonantDC Link Inverter (RDCLI) which shows a great deal of pronuse using currently availabledevices.The frequency domain simulation of RDCLIs is discussed as a means of rapidly …
-
Particle Swarm Design Optimization of ALA Rotor SynRM for Traction Applications
… at a constant developed torque average for traction applications. The number of flux paths, stator tooth width, and rotor flux path width define the 3-Dimensional search space for the optimization problem. A coupled Finite Element-State Space model is developed for the ''robust" …
-
Permanent Magnet Assisted Synchronous Reluctance Machines for Electric Vehicle Traction Applications
… permanent magnets for electric vehicle traction applications. The design optimisation methodology is based on the performance of the traction machine over specific driving cycles instead of conventionally adopted practices relying on optimisations at a specific operating condition. …
-
Design Approaches to Enhance Power Density in Power Converters for Traction Applications
… discrete devices is presented for a 50 kW traction inverter. Embedded capacitors within the vacant volume of the hybrid material thermal management structure enables higher power density (155 kW/L) and significantly reduces cost.
-
Design and Analysis of Hybrid Permanent Magnet Variable Flux Motors for Traction Applications
… (PMSMs) are increasingly being utilized for traction applications thanks to their high torque/power densities along with high efficiencies. The high power/torque density feature leads to a lower weight and more powerful machine. On the other hand, the high efficiency feature will lead to less …
-
Design of a Spoke Type PMSM with SMC Stator Core for Traction Applications
… machines are the most vital component in traction applications as they provide electromechanical energy conversions. Traction applications require motor drive systems that can operate with high torque and high-power densities with reduced maintenance costs and losses. Since the 20th …
-
Dynamic Charge Characteristics of High Carbon Lead Acid Batteries in Electric Vehicle Traction Applications
The work presented in this thesis was completed with the aim of providing a complete picture of the dynamic charge acceptance (DCA) behaviour of lead-acid (PbA) batteries of different carbon additive technologies. It was inspired by the growth in the electric vehicle (EVs) market due to the …
-
Double-Side Cooled 3.3 kV, 100 A SiC MOSFET Phase-Leg Modules for Traction Applications
… SiC MOSFET phase-leg power module for heavy-duty traction applications. Parasitic extraction and thermal simulations of the module showed a parasitic inductance of 2.89 nH and junction temperature of 108.3 °C at a heat flux of 156 W/cm² under a typical water-cooling condition. Electric field …
-
Hybrid Asynchronous/Synchronous Pulse Width Modulation Technique for Permanent Magnet Synchronous Motor Drives in Traction Applications
… is a well-established solution in railway traction applications. This technique achieves low current total harmonic distortion (THD) over a wide speed range and extends the motor operation range while maintaining the switching frequency within the desired range. Therefore, the hybrid …
-
PREDICTION OF DISCRETE ELEMENT PARAMETERS FOR MODELING THE STRENGTH OF SANDY SOILS IN WHEEL/SOIL TRACTION APPLICATIONS
… highly idealized and are limited in their applications. Today, many computational models have been implemented for a wide variety of wheel/soil applications. For the specific case of sandy (i.e. non-cohesive) soils, in terms of the soil's physics the Discrete Element Method (DEM) provides …
-
Synchronous Optimal Pulse Pattern Modulation and Predictive Control for Permanent-Magnet Synchronous Motor Drives in Traction Applications
… synchronous motors (PMSMs) are widely used in traction applications due to their high efficiency and power density. However, their performance is often limited by conventional modulation and control strategies, especially under low switching-to-fundamental frequency ratio (SFR) conditions. …
-
Design and Analysis of a 70KW 3-Level Active Neutral Point Clamped (ANPC) Inverter for Traction Applications
… been conducted in improving the efficiency of traction inverters. Inverter topologies are categorized based on the number of voltage levels of the inverter output phase voltage. The conventional 2-level Voltage Source Inverter (VSI) is commonly used as a traction inverter due to its simple …
-
Impact of Charge Profile on Battery Fast Charging Aging and Dual State Estimation Strategy for Traction Applications
The fast-growing electric vehicles (EVs) market demands huge efforts from car manufacturers to develop and improve their current products’ systems. A fast charge of the battery pack is one of the challenges encountered due to the battery limitations regarding behaviour and additional degradation …
-
Design, Control and Experimental Validation of an 800 V Wide-Bandgap Power Converter for Fuel Cell Traction Applications
L'abstract è presente nell'allegato / the abstract is in the attachment
Page 1 of 3