Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 39 for “"Traction Separation Law"”.
-
Traction-separation law for CFRP-concrete interface fracture under mode II loading
… obtain the fracture energy release rate and the traction-separation law, by measuring the load and slip at the debonding end only, which was verified by the traditional strain-based method. The durability of the interface is characterized by the energy release rate (ERR). By comparing the results …
-
A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems
… indenters. The cohesive zone model based on traction separation law (T-S) is employed during the FEM simulation. The cohesive zone model used in this thesis contains three important parameters: interface strength, interface energy and the shape of the traction separation law. This thesis …
-
Modeling of three dimensional microstructures including grain boundary mechanisms
… of the cohesive elements is defined by a traction separation law. FE analyses on models containing cohesive elements were performed using both an implicit and explicit time integration technique to solve the FE equations. It was found that when using the implicit solver it was difficult to …
-
QUASI-STATIC AND IMPACT CHARATERIZATIONS OF STITCHED FLAX FIBER COMPOSITE
… means of the cohesive element with a trilinear traction-separation law and a 2-node beam element. A finite element modeling of the drop-weight impact test on woven flax fiber composite was also implemented to study the material behavior, damage development, and impact fracture resistance. The …
-
Micromechanics of the Hydrogen Effect on Plasticity and Interfacial Decohesion
A traction-separation law that describes the cohesion of an interface in the presence of hydrogen is suggested and implemented through interfacial cohesive finite elements to study interfacial debonding around an elastic particle imbedded in an elastoplastically deforming matrix, while transient …
-
Experimental and computational investigation of the effect of environmental degradation on interlaminar shear strength of carbon/epoxy composites
… cohesive layer constitutive model with a cubic traction-separation law was employed in order to simulate the experiment using an in-house Finite Element Analysis code (NOVA-3D). Numerical instabilities encountered using the standard elastic cohesive layer model were overcome by incorporating …
-
Characterization and modeling of the effect of environmental degradation on flexural strength of carbon/epoxy composites
… cohesive layer constitutive model with a cubic traction-separation law has being developed in order to predict the life of the composite under hygrothermal conditions. The model simulated the test conditions and predicted the progressive failure mechanism of the specimen as observed in the …
-
Atherosclerotic Plaque Adhesion Strength and its role in Plaque Rupture
… the layers of the arterial wall. It results in separation of the different layers, creating a false lumen in the process. The advantages to performing a primary study on arterial dissection were first to apply the cohesive zone models to a less complex problem than atherosclerosis. The …
-
Experimental and Numerical Methods for Characterization of Impact Damage in Titanium-Graphite Laminates
… material models in conjunction with a traction-separation law and applicable geometry to model three-point-bending behavior of TiGr laminates. Results show that dynamic finite element simulation can accurately portray the various failure mechanisms associated with low-velocity impact. …
-
Cohesive zone model for facesheet -core interface delamination in honeycomb FRP sandwich panels
… with linear-exponential irreversible softening traction-separation law, satisfying empirical mixed-mode fracture criteria, is proposed to represent progressive damage occurring within the interface during the fracture process. The CZM is implemented as a cohesive interface element through a …
-
Bioinspired Materials for Multifunctional Applications: From Morphing Surfaces to Stimuli-Responsive Adhesives
… loading. The model extends a potential-based PPR traction-separation law to incorporate thermo-dependent property transitions, viscoelastic response, and cyclic degradation, and was implemented in Abaqus as a user element subroutine validated against mechanical interlocking fastener experiments …
-
Bioinspired Materials for Multifunctional Applications: From Morphing Surfaces to Stimuli-Responsive Adhesives
… loading. The model extends a potential-based PPR traction-separation law to incorporate thermo-dependent property transitions, viscoelastic response, and cyclic degradation, and was implemented in Abaqus as a user element subroutine validated against mechanical interlocking fastener experiments …
-
Bioinspired Materials for Multifunctional Applications: From Morphing Surfaces to Stimuli-Responsive Adhesives
… loading. The model extends a potential-based PPR traction-separation law to incorporate thermo-dependent property transitions, viscoelastic response, and cyclic degradation, and was implemented in Abaqus as a user element subroutine validated against mechanical interlocking fastener experiments …
-
Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging
… pre-existing crack. In a cohesive zone approach, traction forces between surfaces are related to the crack tip opening displacement and are governed by a traction-separation law. Unlike traditional fracture mechanics approaches, cohesive zone analyses can predict starter crack locations and …
-
Machining using a diamond-coated cutting tool: finite element simulations and experiments
… at different conditions; and (3) incorporating a traction-separation law as the interface behavior in the FE cutting simulations for coating delamination analysis. The major findings are summarized as follows: (1) In gentle cutting, deposition residual stresses remain dominant, but change …
-
On modelling of the structural integrity of rails and crossings
… and mechanism, the current model relies on the traction-separation law, which yields excessively high predicted vertical static forces. This model should be improved by considering factors such as longitudinal traction, lateral traction, and shear stress. The acoustic emission (AE) technique, …
-
FINITE ELEMENT ANALYSIS OF THE CONTACT DEFORMATION OF PIEZOELECTRIC MATERIALS
… a piezoelectric film and an elastic substrate, a traction-separation law is used to control the interfacial behavior between a thin film and an electrically grounded elastic substrate. The discontinuous responses at the initiation of interfacial decohesion are found to depend on interface and …
-
Investigating Mechanisms of Fracture at the Nanoscale in Polymer Nanocomposites Using Atomistic Simulations
… Furthermore, through J integral, a cohesive traction separation law for polymer composites was derived at the nanoscale notch tip as material property when specific modeling criteria was followed. Finally, the optimum size and orientation of GNP at fixed vol% in the polymer were evaluated …
-
Characterization and modeling of long-term behavior of frp-to-concrete interface in aggressive environments
… proposed and carried out to directly measure the traction-separation law of the epoxy-concrete interfaces under mode I loading, which is not available in the literature. The potential of using silane coupling agent to improve the durability of the FRP-to-concrete interface has also been examined …
-
Numerical modeling of orthogonal cutting of carbon fibre reinforced polymer composites
… phases and their interface is defined by a traction-separation law. In the latter, the composite is represented by an anisotropic equivalent homogeneous material. It is shown that the numerical predictions are in good agreement with experimental results. With ABAQUS being the most commonly …
Page 1 of 2