Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 115 for “"Trailing Edges"”.

  1. Film cooling of turbine blade trailing edges

    … film cooling on modern gas turbine engines, the trailing edge film poses a particularly challenging design problem. From an aerodynamic point of view, the trailing edge of a blade is designed to be as thin as possible. However, this conflicts with the implementation of the cooling design. The …

    oxford Repository record for Film cooling of turbine blade trailing edges (opens in a new tab)

  2. Novel cooling design for blade or vane trailing edges

    <p>The trailing edge of the high pressure turbine blade and vane presents significant challenges to the turbine cooling engineer. This section endures very high temperature and mechanical stresses but aerodynamic efficiency requirements dictate that it must be tapered to the end with minimal …

    oxford Repository record for Novel cooling design for blade or vane trailing edges (opens in a new tab)

  3. A nonlinear theory for thin aerofoils with non-thin trailing edges

    … the lift of a class of thin aerofoils with bluff trailing edges or high incidence flaps. The analysis is based on smallness of the ratio between the flap length (or trailing edge thickness) and the chord of the main foil. Results are compared with exact solutions for triangular and quadrilateral …

    adelaide Repository record for A nonlinear theory for thin aerofoils with non-thin trailing edges (opens in a new tab)

  4. Low-order methodology for the design of propellers with serrated trailing edges

    … about potential noise pollution in large cities. Trailing edge noise is a significant broadband noise source of hovering UAV propellers, which can be reduced by employing bio-inspired trailing edge serrations. The high computational cost of high-fidelity CFD simulations put them at the end of the …

    ets-quebec Download PDF for Low-order methodology for the design of propellers with serrated trailing edges (opens in a new tab)

  5. Noise Generation by Airfoils and Rotors with Porous and Serrated Trailing Edges

    Trailing-edge (TE) noise is an important noise source for airfoil applications that operate near populated areas. This thesis aims to develop novel (porous, serrated, and porous-serrated) geometries for the TE noise control of airfoils/rotors and investigate their noise generation mechanisms. …

    unsw Repository record for Noise Generation by Airfoils and Rotors with Porous and Serrated Trailing Edges (opens in a new tab)

  6. Evaluation of linear segment length and local curvature radius along airfoil leading and trailing edges

    … and edge radius, the leading edge (LE) and trailing edge (TE) are specified with a unique set of geometric parameters like the maximum linear segment length restriction and the minimum curvature radius restriction. This thesis focuses on evaluating these two localized geometric restrictions …

    ubc Repository record for Evaluation of linear segment length and local curvature radius along airfoil leading and trailing edges (opens in a new tab) Download PDF for Evaluation of linear segment length and local curvature radius along airfoil leading and trailing edges (opens in a new tab)

  7. Predicting the effect of serrated trailing edges on aerofoil self-noise from the source to the far-field

    … analytical methods to investigate the effect of trailing-edge serrations on aerofoil self-noise. Serrated trailing-edges have long been studied as an effective means of noise reduction especially for wind turbine applications. This work aims to present an extensive understanding of the physical …

    soton Download PDF for Predicting the effect of serrated trailing edges on aerofoil self-noise from the source to the far-field (opens in a new tab)

  8. Application of the three-dimensional viscous/inviscid interaction method on predicting the performance of propulsors with blunt trailing edges

    … predict the performance of propulsors with blunt trailing edges (TEs) in steady and fully wetted flow. The VII method is used to solve the flow around hydrofoils, three-dimensional wings and propellers with sharp TEs. The pressure distributions and open water characteristics are compared with …

    texas Repository record for Application of the three-dimensional viscous/inviscid interaction method on predicting the performance of propulsors with blunt trailing edges (opens in a new tab)

  9. A CFD analysis of the download reduction for the V-22 Osprey wing.

    … the use of blowing slots at both the leading and trailing edges of the wing. The analysis was completed using computational fluid dynamics. The Mechanical and Aerospace Engineering department of West Virginia University, in conjunction with The Center for Industrial Research Applications …

    wvu Repository record for A CFD analysis of the download reduction for the V-22 Osprey wing. (opens in a new tab)

  10. Circulation control for download wake reduction on a scaled V-22 model

    … of blowing slots across the leading edge and trailing edge, activation of one or both of the blowing devices, and adjustment of slot velocity. The results of the study show a decrease in the download force through the incorporation of the Coanda Effect around the leading and trailing edges. …

    wvu Repository record for Circulation control for download wake reduction on a scaled V-22 model (opens in a new tab)

  11. Airfoil response to periodic disturbances: the unsteady Kutta condition

    … were obtained in the vicinity of the trailing edges of both the pitching and the fixed airfoils. The flowfields in the wake and at the trailing edges of both airfoils were studied visually. The validity of the quasi-steady and an extension to an unsteady Kutta condition are examined. A …

    vt Repository record for Airfoil response to periodic disturbances: the unsteady Kutta condition (opens in a new tab)

  12. Aeroacoustic Optimization of Flat-Plate Serrated Trailing Edge Extensions for Broadband Noise Reduction

    The ability of trailing edge serrations to reduce turbulent boundary layer trailing edge noise is examined through numerical optimization studies. The in-house optimization program, SAGRGSTEN, is developed and implemented. Two different serration geometries are optimized for the overall noise (from …

    carleton Repository record for Aeroacoustic Optimization of Flat-Plate Serrated Trailing Edge Extensions for Broadband Noise Reduction (opens in a new tab)

  13. Stochastic Analysis of the Transport of Adsorbing Pollutants in Aquifers Having Spatially Variable Chemical Properties

    … of contaminant concentration at the leading and trailing edges of a plume. This has important implications for regulatory assessments for hazardous components which often require calculations of arrival times for low concentration values. Other analytical results show that spatial variability …

    uiuc Repository record for Stochastic Analysis of the Transport of Adsorbing Pollutants in Aquifers Having Spatially Variable Chemical Properties (opens in a new tab)

  14. Reduction of Internal Defibrillation Energy Requirements with a New Biphastic Waveform

    … a waveform which has smoothed leading and trailing edges. A single transient occurs at the switch over between the two phases (Figure l). The experimental defibrillator is capable of delivering biphasic shocks of 5 msec duration, with peak positive and negative amplitudes of greater then …

    marquette Repository record for Reduction of Internal Defibrillation Energy Requirements with a New Biphastic Waveform (opens in a new tab)

  15. Airfoil noise reduction by edge treatments

    … thesis is to investigate experimentally airfoil trailing edge noise reduction using various trailing edge geometries. The work presented in this thesis is part of the FP7 European Project FLOCON. This thesis focuses on sawtooth serrations and a detailed study is conducted in which thirty seven …

    soton Download PDF for Airfoil noise reduction by edge treatments (opens in a new tab)

  16. Trailing edge noise produced by the scattering of boundary layer turbulence

    Noise generated at the trailing edges of airfoils can be an important contributor to the sound levels of aircraft and turbomachinery. Previous work on trailing edge noise has largely neglected the role of the mean boundary-layer profile in the sound generation process. In the present work, a …

    arizona-thes Repository record for Trailing edge noise produced by the scattering of boundary layer turbulence (opens in a new tab)

  17. Subsonic open cavity flows and their control using steady jets

    … locations (blowing from the cavity leading and trailing edges). The data were acquired using qualitative (surface oil flow visualisation) and quantitative (hot-wire anemometry, laser Doppler anemometry, particle image velocimetry, and pressure measurements) flow diagnostics techniques. The study …

    glasgow Repository record for Subsonic open cavity flows and their control using steady jets (opens in a new tab) Download PDF for Subsonic open cavity flows and their control using steady jets (opens in a new tab)

  18. Flow Over and Past Porous Surfaces

    … of flow over a flat plate and past the blunt trailing edges. Comprehensive boundary layer and wake measurements have been carried out for a long flat plate with solid and porous blunt trailing edges. Unsteady velocity and surface pressure measurements have also been performed to gain an …

    bristol Repository record for Flow Over and Past Porous Surfaces (opens in a new tab) Download PDF for Flow Over and Past Porous Surfaces (opens in a new tab)

Page 1 of 6