Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Trailing edge flaps"”.

  1. Pneumatic Artificial Muscle Driven Trailing Edge Flaps For Active Rotors

    … is to investigate the feasibility of a novel Trailing Edge Flap (TEF) actuation system driven by Pneumatic Artificial Muscles (PAMs). A significant design effort led to a series of experimental apparatuses which tested various aspects of the performance of the actuators themselves and of TEF …

    maryland Repository record for Pneumatic Artificial Muscle Driven Trailing Edge Flaps For Active Rotors (opens in a new tab)

  2. A three-dimensional flutter theory for rotor blades with trailing-edge flaps

    … forces and moments of a rotor blade with a trailing-edge flap using eight degrees of freedom. Lagrange's equation is applied using normal modes to find the flutter frequency and speed similar to the classic fixed-wing method developed by Smilg and Wasserman. However, rotary-wing concerns are …

    nps Repository record for A three-dimensional flutter theory for rotor blades with trailing-edge flaps (opens in a new tab)

  3. Swashplateless Helicopter Experimental Investigation: Primary Control with Trailing Edge Flaps Actuated with Piezobenders

    … is designed with integrated piezobender-actuated trailing edge flaps and systematically tested on the benchtop, in the vacuum chamber and on the hoverstand. The blade is nominally based on the UH-60 rotor with a hover tip Mach number of 0.64. The blade diameter is 66 inches requiring 2400 RPM for …

    maryland Repository record for Swashplateless Helicopter Experimental Investigation: Primary Control with Trailing Edge Flaps Actuated with Piezobenders (opens in a new tab)

  4. Design and Performance Prediction of Swashplateless Helicopter Rotors with Trailing Edge Flaps and Tabs

    This work studies the design of trailing edge controls for swashplateless helicopter primary control, and examines the impact of those controls on the performance of the rotor. The objective is to develop a comprehensive aeroelastic analysis for swashplateless rotors in steady level flight. The two …

    maryland Repository record for Design and Performance Prediction of Swashplateless Helicopter Rotors with Trailing Edge Flaps and Tabs (opens in a new tab)

  5. Noise Emission from the Trailing-edge Flaps of Two- and Three-element High Lift Devices

    … Beamforming identified the flap cove and leading edge as the main contributors to far-field noise. Weak mixing between the flap cove shear layer and the main element wake resulted in sustained wake deficit on the flap suction surface, reducing the flap broadband noise compared to the slat, and …

    toronto-retro Repository record for Noise Emission from the Trailing-edge Flaps of Two- and Three-element High Lift Devices (opens in a new tab)

  6. Active Control of Performance and Vibratory Loads using Trailing-Edge Flaps and Leading-Edge Slats

    … Rotor Code) to study the capabilities of trailing-edge flaps (TEFs)and leading-edge slats (LESs) for helicopter vibration reduction and performance improvement and rec- ommend flap and slat configurations for a typical helicopter rotor such as UH-60A rotor, which maximize these benefits. …

    maryland Repository record for Active Control of Performance and Vibratory Loads using Trailing-Edge Flaps and Leading-Edge Slats (opens in a new tab)

  7. CFD analysis and design of a low-twist, hovering rotor equipped with trailing-edge flaps

    … rotor equipped with both slotted and blended trailing-edge flaps. This was accomplished by combining a simple blade element method with 3D inviscid and RANS CFD that allowed for a robust sequence of design specification, analysis, and verification. Most modern helicopters have high levels of …

    glasgow Download PDF for CFD analysis and design of a low-twist, hovering rotor equipped with trailing-edge flaps (opens in a new tab)

  8. Primary Control of A Mach Scale Swashplateless Rotor Using Brushless DC Motor Actuated Trailing Edge Flaps

    … rotor trim in forward flight using integrated trailing edge flaps instead of using a swashplate controls. A compact brushless DC motor was evaluated as an on-blade actuator, with the possibility of achieving large trailing edge flap amplitudes. A control strategy to actuate the trailing edge …

    maryland Repository record for Primary Control of A Mach Scale Swashplateless Rotor Using Brushless DC Motor Actuated Trailing Edge Flaps (opens in a new tab)

  9. Development of an Active Aeroelastic Continuous Trailing Edge Wind Tunnel Wing Model for Drag and Gust Load Minimization

    … The model uses eight independently controlled trailing edge flaps, and contains accelerometers and strain gauges for load sensing. The design builds off three VCCTEF aeroelastic models: two with manual adjustment and one with active control. A detailed NASTRAN model was developed and validated …

    washington Repository record for Development of an Active Aeroelastic Continuous Trailing Edge Wind Tunnel Wing Model for Drag and Gust Load Minimization (opens in a new tab)

  10. The smart rotor wind turbine

    … approach to selecting the chord-width of trailing edge flaps, based on thin aerofoil theory, is presented. Demonstrating a trade-off between flap size, flap actuator requirements and load reductions. The unsteady aerodynamics of trailing edge flaps and their modelling in Bladed is also …

    strathclyde Repository record for The smart rotor wind turbine (opens in a new tab)

  11. Aerodynamic pitch-up of cranked arrow wings: estimation, trim, and configuration design

    … as 5°) during low-speed flight due to leading edge vortex influence, flow separation and vortex breakdown. The work presented here describes an investigation conducted to study past research on the longitudinal aerodynamic characteristics of highly-swept cranked wing planforms, the development …

    vt Repository record for Aerodynamic pitch-up of cranked arrow wings: estimation, trim, and configuration design (opens in a new tab)

  12. Development of a Wind Turbine Test Rig and Rotor for Trailing Edge Flap Investigation

    … increase the size and lifespan of rotors. Trailing edge flaps are one technology proposed for changing the aerodynamic characteristics of a blade in order to limit the transformation of freestream wind fluctuations into load fluctuations within the blade structure. An instrumented wind …

    waterloo Repository record for Development of a Wind Turbine Test Rig and Rotor for Trailing Edge Flap Investigation (opens in a new tab)

  13. Robust Control and Aeroelastic Modeling of Conformal Trailing Edge Surfaces Using Thin Airfoil Theory

    … and inertial forces. Traditional hinged trailing-edge flaps often require substantial control effort for flutter suppression, limiting their effectiveness over wide flight envelopes. Additionally, traditional trailing-edge flaps exhibit a static aeroelastic limitation known as roll …

    houston Repository record for Robust Control and Aeroelastic Modeling of Conformal Trailing Edge Surfaces Using Thin Airfoil Theory (opens in a new tab) Embargoed until 2027-12-01

  14. comprehensive aeroelastic analysis of helicopter rotor with trailing-edge flap for primary control and vibration control

    … analytical model of helicopter rotors with trailingedge flaps for primary and vibration controls has been developed. The derivation of system equations is based on Hamilton principles, and implemented with finite element method in space and time. The blade element consists of fifteen degrees …

    maryland Repository record for comprehensive aeroelastic analysis of helicopter rotor with trailing-edge flap for primary control and vibration control (opens in a new tab)

  15. MECHANISMS AND ACTUATORS FOR ROTORCRAFT BLADE MORPHING

    … Pneumatic Artificial Muscle (PAM) actuated trailing edge flaps and conformal variable diameter morphing. First, active camber changes through the use of PAM powered trailing edge flaps were investigated due to the potential for reductions in power requirements and vibration/noise levels. A …

    maryland Repository record for MECHANISMS AND ACTUATORS FOR ROTORCRAFT BLADE MORPHING (opens in a new tab)

  16. An Airloads Theory for Morphing Airfoils in Dynamic Stall with Experimental Correlation

    … may incorporate dynamically morphing airfoils: trailing-edge flaps, dynamic camber, dynamic droop, etc.). Reduced-order aerodynamic models are needed for preliminary design and flight simulation. A unified model for predicting the airloads on a morphing airfoil in dynamic stall is presented, …

    wustl Repository record for An Airloads Theory for Morphing Airfoils in Dynamic Stall with Experimental Correlation (opens in a new tab)

  17. Development of a 1/7-scale F/A-18 UAV for supermaneuverability research.

    … extensively modified to incorporate rudders and trailing edge flaps. In addition, an emergency parachute recovery system (EPRS) was installed for use in the event of departure from controlled flight, loss of radio signal, structural failure or any other anomally that would preclude a normal …

    nps Repository record for Development of a 1/7-scale F/A-18 UAV for supermaneuverability research. (opens in a new tab)

  18. Individual Blade Control for Vibration Reduction of a Helicopter with Dissimilar Blades

    … to reduce vibrations in helicopters using active trailing-edge flaps on the rotor blades. The novelty of the method is that each blade is controlled independently, taking into account possible blade dissimilarities. This is different from previous control approaches that assumed blades were …

    maryland Repository record for Individual Blade Control for Vibration Reduction of a Helicopter with Dissimilar Blades (opens in a new tab)

Page 1 of 2