Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 46 for “"Train Speed"”.
-
A microsimulation analysis of highway intersections near highway-railroad grade crossings
… (HRGCs) to determine if controlling mean train speed and train speed variability would improve safety and reduce delays. This research focused on three specific areas. First, average vehicle delay was examined, and this delay was compared for seven specific train speed distributions, …
-
Multi-Function LIDAR Sensors for Non-Contact Speed and Track Geometry Measurement in Rail Vehicles
… is studied for the application of measuring train ground speed in a non-contacting manner, as an alternative to the current train speed measurement devices such as wheel-mounted tachometers or encoders. The ability to accurately measure train speed and distance is a critical part of …
-
Investigating intraflagellar transport in Leishmania mexicana using dual-colour high-frame rate imaging and genetically encoded fluorescent proteins
… movement of intraflagellar transport (IFT) trains along the axoneme are driven by kinesins and dyneins. Previously IFT train speeds have been quantified in mechanically immobilised or genetically paralysed flagella, limiting exploration into the relationship between IFT and flagellar …
-
Numerical study on the behaviour of jointed rock under train loads
… the operation of high-axle heavy-haul freight trains, reducing the strength of the intact rock block and improving mobility. When a railway embankment is adjacent to a rock slope, failures in jointed rock mass can be triggered when the train load exceeds a specific level. Therefore, it is …
-
Full scale train underbody aerodynamic evaluation for top of rail friction modifier application
… nozzle located downwind of the wheels on freight trains. Understanding the aerodynamic environment of the nozzle is important for researching how to maximize the deposition of the liquid friction modifier from the nozzle to the tracks. The air pressure and velocity at the location of the nozzle …
-
High Speed Train Geotechnics: Numerical and Experimental Simulation of Some Embankment Problems
… challenges associated with implementing high-speed railway (HSR) systems. These challenges are mostly related to HSR embankments. Three special geotechnical issues addressed in this project are long-term softening of compacted unsaturated embankments due to water absorption, potential …
-
A Theoretical Structural Impairment Detection System for Timber Railway Bridges
… The accelerations were then used to train neural networks to have an input of an acceleration vector and an output of a bridge condition vector. The neural networks were trained on results from both models under three train speeds: 40 mph, 30 mph, and 20 mph. The networks were able to …
-
Determinants of Risk in Bear-Train Interactions
… the behavioral responses of bears and oncoming trains to better understand what bears perceive as ‘risky’ in bear-train encounters. I used videos of bear-train interactions to measure site-specific variables at bear-train encounter sites to explain a bear’s flight initiation distance (FID) and …
-
Effect of clogged drainage pipes on the stability of railway embankments
… creates dangerous riding conditions for passing trains. As such, it is crucial to identify the factors that influence the slope stability of railway embankments subjected to rising water levels and exposed to train traffic. The purpose of this thesis is to study the slope stability of railway …
-
Effect of Rapid Drawdown on the Stability of Railway Embankments
… in further safety implications when a freight train is passing through this area. Thus, to enhance the safety and stability of a clay slope under both rapid drawdown and a moving freight train conditions requires in-depth investigation, which has not been done before. This work is focused on …
-
Wheel-rail impact loads generated by wheel flats - Detector measurements and simulations
The railway system relies on trains running according to the train schedule to avoid delays, which is why there needs to be as few interruptions as possible. This thesis focuses on wheel tread damage in the form of wheel flats. Based on Trafikverket’s regulations, if a flat is longer than 60 mm …
-
Railway wheel tread damage: Detection and consequences of wheel-rail impact loading
… dynamic loads are considerably influenced by the train speed. For wheels with severe tread damage, the loads are also significantly influenced by the time since the previous wheel maintenance or replacement (probably related to the increasing wheel tread degradation rate over time). It is observed …
-
Dynamic Braking Control for Accurate Train Braking Distance Estimation under Different Operating Conditions
… of Model Reference Adaptive Control (MRAC) for train dynamic braking is investigated in order to control dynamic braking forces while remaining within the allowable adhesion and coupler forces. This control method can accurately determine the train braking distance. One of the critical factors …
-
A Mixed Integer Programming Model to Minimize Fuel Consumption in Freight Train Operation
… is among the most important criteria in train operations. Considerable efforts have been made to identify optimal speed for enhanced fuel economy. The train speed control is achieved through switching the power notches, which sets constant level of fuel supply to the engine in a typical …
-
Optimising power management strategies for railway traction systems
… certain operational, geographic and physical constraints, the energy consumed by the train can be significantly reduced if improved control strategies are implemented. This thesis proposes a distance based model for train speed trajectory optimisation. Three optimisation algorithms, Ant Colony …
-
Closer running - railway capacity analysis and timetable improvement
… to try to improve capacity by changing train speed and braking rate as they are both limited by physics. Also, train length has a minor negative impact on the line capacity, even though passenger capacity can be increased significantly by coupling more carriages. So, optimising …
-
An investigation of the slipstreams and wakes of trains and the associated effects on trackside people and objects
… if a person or a pushchair is destabilised by a train's slipstream. The model simulates the mean slipstream velocity time history using the theories of potential flow, boundary layer growth and wake decay. The turbulence-induced fluctuations are reproduced with an autoregressive model. A …
-
Effect of Ballast Pockets on the Stability of Railway Embankments
… the repeated loading of the subgrade by passing trains. Ballast pockets reduce the stability of clay slopes under railway embankments, further affecting the safe traversal of freight trains on the track. Therefore, quantifying the impact of ballast pockets on slope stability is important for …
-
Field test program of the concrete crosstie and fastening system
… freight tonnages and development of its high speed rail program, the design and performance of concrete crossties and elastic fastening systems must be upgraded. As a part of a study aimed at improving concrete crossties and fastening systems, field experimentation was performed at the …
-
Development of an Access Charge Framework for High-Speed Rail Incorporating Rail Replacement Costs and Dynamic Train Characteristics
… determine track access charges for shared high-speed rail corridors, with a focus on rail replacement cost driven by train-induced loads. The method explicitly accounts for both static loads, resulting from axle weights, and dynamic loads that arise from train speed and track geometry, …
Page 1 of 3