Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Transbond XT"”.
-
An in vivo and in vitro study of a new orthodontic bonding agent
The in vitro study utilized 90 extracted premolars. The teeth were divided into six groups. In the first three groups brackets were bonded with Concise, Transbond XT, or APC Plus and debonded 30 minutes after bonding. In the second three groups, brackets were bonded with Concise, Transbond XT, or …
-
Shear bond strengths of two new self-etching primers
… were bonded with a stainless steel button using Transbond XT composite. The bonding agents were iBOND, G-Bond, Transbond Plus SEP and Transbond XT primer (control). SBS’s immediately, 24hours and 3months were measured with their Adhesive Remnant Index (ARI). Results: Transbond XT primer …
-
Bond Strengths of Three Orthodontic Adhesives for Direct and Indirect Bonding
… this fairly new indirect adhesive with 3M's Transbond XT and Reliance's Rely-A-Bond. Two hundred and seventy freshly extracted bovine teeth were mounted in acrylic resin and divided into 18 groups of 15 teeth each. Nine groups were bonded indirectly and nine groups were bonded directly. The …
-
Orthodontic Bond Strength Comparison Between Two Filled Resin Sealants
… bonded to teeth. Materials and Methods: Extracted human premolars (n=20/group) were randomly divided and prepared by acid etching, followed by application of primer or sealant. Group 1, the control group, used Transbond XT Primer (3M Unitek). Groups 2 and 3 were prepared with the sealants …
-
Color Characterization of Color Changing Orthodontic Adhesives
… Color Change by American Orthodontics and Transbond PLUS by 3M Unitek were evaluated. As a non-color changing control, Transbond XT by 3M Unitek was analyzed. A teflonTeflon mold was used to fabricate uniform discs of adhesives (n=10/adhesive). A spectrophotometer was used to analyze the …
-
A Comparison of the Failure Rate of Two Orthodontic Light-Curable Adhesives: A Chart Review
… available bracket adhesive systems such as Transbond XT™ (3M™ Company, St. Paul, MN) which is often used as a gold standard to compare other adhesive systems. Comparing Transbond XT™ to BracePaste® and finding favorable results may provide evidence of an effective alternative to the highly …
-
The Influence of Work of Fracture on Six Orthodontic Bonding Systems
… with one of the following adhesives, Gren Gloo, Transbond XT or Glass lonomer. After bonding, the specimens were stored in distilled water at room temperature for 72 hours. The brackets were then debonded with a high-resolution tensile testing device and then assigned an Adhesive Remnant Index …
-
Vergleich der Scherhaftfestigkeiten von Adhäsiven für kieferorthopädische Befestigungselemente nach DIN 13990-1/ -2
… 2\. die Scherhaftfestigkeit der Adhäsive Transbond XT, Beauty Ortho Bond und Fuji Ortho LC unter unterschiedlichen Ätzbedingungen zu bestimmen Methode Die Schmelzoberfläche wurde im ersten Versuchsteil nach Herstellerangaben konditioniert. Im zweiten Versuchsteil wurde die …
-
The Effects of a Fluoride Releasing Orthodontic Primer on Demineralization around Brackets: An in-vivo study.
… number of WSLs observed between Opal Seal and Transbond XT over the duration of this study. Solid conclusions could not be drawn from the results of microhardness testing. Therefore, it cannot be concluded that there is a difference in enamel hardness between Opal Seal and Transbond XT. …
-
A Comparison of Bond Strength Between Direct and Indirect Bonding Methods
… light cured, highly filled orthodontic adhesive, Transbond XT (3M/Unitek Corporation, Monrovia, CA) and Transbond XT Light Cure Adhesive Primer (3M/Uniteck [sic] Corporation, Monrovia, CA). The control group utilized the direct bonding protocol recommended by the manufacturer. The second group, …
-
Translucency, stain resistance and hardness of composites used for Invisalign attachments
… and three orthodontic adhesives (L.C.R.™, Transbond™ XT, Phase II® Dual Cure) were used in this in-vitro study. 2.0 mm thick samples of each material were fabricated in silicone molds covered with a flat sheet of Invisalign attachment template material. To evaluate the translucency …
-
Calcium phosphate orthodontic adhesives: an in vitro investigation of bond strength and calcium ion release
… brackets were bonded to 420 previously extracted premolar teeth using Transbond XT (a conventional composite), Fuji Ortho (a resin-modified glass ionomer), Aegis Ortho (an amorphous calcium phosphate (ACP) composite) and experimental composites containing 0%, 1%, 5% and 10% TCP. Bond …
-
Resistência ao cisalhamento e grau de conversão: efeito de diferentes protocolos de fotoativação na colagem de bráquetes metálicos
… with phosphoric acid (15 seconds) and Primer Transbond XT (3M Unitek), metal brackets were bonded to the enamel with Transbond XT resin (3M Unitek) using 23 photoactivation protocols according to the factors "photoactivator" (FlashMax P4 – RMO, Valo Cordless – Ultradent or Radii-Cal – SDI), …
-
The Bond Strength and Rebond Strength of Two Orthodontic Adhesives on Identically Conditioned Enamel Surfaces
… were bonded, with one of the two adhesives, to extracted human premolars and then debonded with a shear force in the Instron Universal Testing Machine. The enamel surface was then reconditioned with a 12-fluted tungsten carbide finishing bur in a high speed handpiece to remove the bulk of …
-
An In Vitro Comparison of Shear Bond Strength Between Two Orthodontic Light-Curable Adhesive Pastes
… BracePaste compared to that of the conventional “Transbond XT” adhesive. Additionally, enamel and bracket interfaces were examined to determine the location of bond failure and the tooth surfaces were visually examined to assess severity of enamel marks and the presence of remaining adhesives on …
-
Effect of tooth bleaching on the shear bond strength of a fluoride-releasing sealant
… Methods and Materials: One hundred and sixty extracted human molars were randomly divided into bleached (N=80) and unbleached groups (N=80). The bleached group was treated with 45% carbamide peroxide for half an hour, followed with five applications of 20% carbamide peroxide at 24 hour …
-
Evaluation der Haftfestigkeit und des Debondingverhaltens einer neu entwickelten Bracketbasis im Basis- und Methodenvergleich
… getestet. Sie wurden mit den Adhäsiven Transbond XT, Kurasper F und GC Ortho Connect auf bovine Zähne sowie auf PMMA-Ringe geklebt und anschließend hinsichtlich ihrer Haftfestigkeit untersucht. Vergleiche konnten außerdem zwischen den Testmethoden der Abscher- und Abzugtests wie auch der …
-
The Fluoride Recharging Capability of an Orthodontic Primer: an in vitro study
… releasing orthodontic primer, as compared to Transbond XT, the control. Material and Methods: 1mm x 5mm disks of Opal Seal and Transbond were prepared according to the respective manufacturer’s instructions. Initially, the samples were stored in deionized water (DI) for 8 weeks. The samples …
-
Orthodontic shear bond strengths of a self-adhering resin to enamel, restorative composite and porcelain
… enamel (Tt) with coarse pumice debridement, 2. Transbond XT (3M, Unitek) to enamel (Tc) with phosphoric acid etching [control], 3.Vertise Flow to Herculite Ultra (Kerr) (Cc) with coarse pumice debridement, 4. Vertise Flow to Filtek Supreme Ultra (3M, ESPE) (Ct) with coarse pumice debridement, 5. …
-
Protocolo de cementación indirecta de aparatología ortodóncica fija utilizando materiales de uso común
… como resina de cementación de brackets (Transbond XT, 3M Unitek, EEUU), aislante de acrílico para separar los brackets del modelo de yeso y silicona líquida, utilizada habitualmente para autos (Kit Silicona, Johnson, Chile), para separar los brackets del soporte termoplástico, el cual fue …
Page 1 of 3