Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Transducers -- Design and construction"”.

  1. Design, construction, and testing of ultrasonic transducers with modified radial velocity profiles

    … which is Gaussian as a function of radius and independent of angle is described. The transducer has been constructed by depositing a circularly symmetric metallic multiple electrode array on a 12. 7 mm diameter x-cut quartz disk. Each electrode is independently connected to an impedance …

    vt Repository record for Design, construction, and testing of ultrasonic transducers with modified radial velocity profiles (opens in a new tab)

  2. Development of adaptive transducer based on biological sensory mechanism

    An adaptive sensor concept and prototype has been developed based on a sensing element which is analogous to and inspired by the arrangement of outer hair cells and inner hair cells between the basilar membrane and tectorial membrane which form the organ of corti in mammalian cochlea. The …

    texas Repository record for Development of adaptive transducer based on biological sensory mechanism (opens in a new tab)

  3. Development of a variable frequency heterodyne sonication system

    … characteristics change widely with frequency, and it is consequently difficult to develop a drive circuitry which drives the instrument over a wide range of frequencies. The instrument designed in this thesis is unique because it produces ultrasound over the frequency range from 150 kHz to 500 …

    ttu Repository record for Development of a variable frequency heterodyne sonication system (opens in a new tab)

  4. Variable capacitive transducer

    … small angular movements, with good accuracy and resolution. An electrical equivalent circuit of the transducer is developed, and the transducer behavior is simulated. Simulation results are compared with experimental results. Possible causes for any disparity in the results are discussed. The …

    ttu Repository record for Variable capacitive transducer (opens in a new tab)

  5. Design and calibration of a rapid-response thin-film heat flux gage

    … measurement system was built, calibrated and tested for use in unsteady flows. The system was designed to maintain constant wall temperature boundary conditions. The measuring element is a thin-film heat flux gage made by sputter-coating gold on a substrate. A constant-temperature …

    vt Repository record for Design and calibration of a rapid-response thin-film heat flux gage (opens in a new tab)

  6. Simultaneous direct measurements of skin friction and heat flux in a supersonic flow

    A new gage which can measure skin friction and heat flux simultaneously was designed, constructed, and tested. This gage is the combination of a non-nulling type skin friction balance and a heat flux microsensor. By mounting the heat flux microsensor directly on the surface of the floating element …

    vt Repository record for Simultaneous direct measurements of skin friction and heat flux in a supersonic flow (opens in a new tab)

  7. A microengineered beam diaphragm structure for the high performance pressure sensor

    <p>The thesis details the design for a novel microengineered beam diaphragm structure for piezoresistive pressure sensor applications. The beam diaphragm structure is used as a pressure sensing device, within a Wheatstone bridge circuit. The single crystal silicon with [100] orientation is used for …

    njit Repository record for A microengineered beam diaphragm structure for the high performance pressure sensor (opens in a new tab)

  8. Interdigital Capacitive Micromachined Ultrasonic Transducers for Microfluidic Applications

    … of this research was to develop acoustic sensors and actuators for microfluidic applications. To this end, capacitive micromachined ultrasonic transducers (cMUTs) were developed which generate guided acoustic waves in fluid half-spaces and microchannels. An interdigital transducer structure and a …

    gatech Repository record for Interdigital Capacitive Micromachined Ultrasonic Transducers for Microfluidic Applications (opens in a new tab)

  9. Semiconductor pressure sensor and amplifier with extended temperature range

    <p>In this thesis work, a unique raicrosensor was designed for pressure measurements over the temperature range of -80 C to 125 C. The sensor has CMOS circuitry powered by a single voltage supply. It can be used for military and space applications including monitoring the pressure acting on the …

    njit Repository record for Semiconductor pressure sensor and amplifier with extended temperature range (opens in a new tab)

  10. Microengineered thermal conductivity vacuum pressure sensor

    <p>This thesis details the first designs for microengineered vacuum pressure gauges based on silicon microelectronic technology. A monolithic polysilicon air-bridge structure (supported at both ends), within a Wheatstone bridge circuit, is used as a pressure sensor. The device utilizes the change …

    njit Repository record for Microengineered thermal conductivity vacuum pressure sensor (opens in a new tab)

  11. Fabrication of Piezoelectric Field Effect Transistors for Acoustic Signal Detection

    In this study, a standard bulk FET design is fabricated with a piezoelectric gate, allowing a microwave-frequency voltage signal to be transmitted from a transducer to the transistor via acoustic conduction through the substrate. Using a single polycrystalline aluminum nitride film as the …

    ucf Repository record for Fabrication of Piezoelectric Field Effect Transistors for Acoustic Signal Detection (opens in a new tab)

  12. Acoustoelectric Amplification in Piezoelectric-Silicon Micromachined Lamb Wave Devices

    … the interactions between acoustic phonons and electrons to enable radio frequency (RF) signal amplification or attenuation. Thin films of piezoelectric and semiconductor material are tailored into a heterostructure that allows for a strong acoustoelectric (AE) effect due to the combination …

    ucf Repository record for Acoustoelectric Amplification in Piezoelectric-Silicon Micromachined Lamb Wave Devices (opens in a new tab)

  13. The Design of a Deep Ocean Hydrophone

    A design for a deep ocean hydrophone is proposed here. The hydrophone's sound sensing element is comprised of a capped end, piezoelectric cylinder. This sound sensing element is encased in an acoustic coupling fluid filled elastomeric boot. A small diameter tube communicates hydrostatic pressure …

    ucf Repository record for The Design of a Deep Ocean Hydrophone (opens in a new tab)

  14. Frequency to Voltage Signal Conditioner Circuit Design

    The following report explains the design of a frequency to voltage converter circuit using a charge pump. In general, it may be considered a black box which accepts a 0 to 2 kHz frequency signal in, and outputs a 0 to 10 volt DC level. An additional feature of this circuit is the detection of …

    ucf Repository record for Frequency to Voltage Signal Conditioner Circuit Design (opens in a new tab)

  15. Mathematical modeling of a low frequency cylindrical sound transducer

    … equation. The equation was solved numerically and the resulting motion of the transducer was linked to the acoustic radiation. Further simplifying assumptions were. made and a resulting second order, non-linear, ordinary differential equation was found to yield approximately the same results as …

    ucf Repository record for Mathematical modeling of a low frequency cylindrical sound transducer (opens in a new tab)

  16. The Design and Analysis of a Unique Broadband Underwater Acoustic Source

    … the form of a linear array of discrete elements and is required to have a constants transmitting voltage response and carefully controlled directivity characteristics over a two octave bandwidth. A generalized model of a linear array of cylindrical piezoelectric ceramic acoustic radiators is …

    ucf Repository record for The Design and Analysis of a Unique Broadband Underwater Acoustic Source (opens in a new tab)

  17. The Design and Analysis of a Rare Earth Iron Magnetostrictive Underwater Sound Transducer

    The design and analysis of a low-frequency, resonant, tonpilz type, rare earth iron underwater sound transducer using rods of Tb.27Dy.73Fe1.95 are described. An equivalent circuit is presented which predicts the performance of the transducer in the presence of eddy currents and demagnetization. The …

    ucf Repository record for The Design and Analysis of a Rare Earth Iron Magnetostrictive Underwater Sound Transducer (opens in a new tab)

Page 1 of 2