Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"Transfer Length Method"”.
-
Ge/SiGe Quantum Wells: Material for the Post-Moore Era
… quality assessed through Schottky diodes, transfer length method devices, and Hall bars. These findings highlight the potential for advanced spintronic and quantum devices, emphasizing the importance of surface preparation and integration techniques in optimizing device performance.
-
Beyond Conventional Impurity Doping: Direct Modulation Doping for Enhanced Carrier Transport in Nanoscale Silicon
… test structures such as Hall-bars and the transfer length method structures are used to investigate the electronic transport properties of modulation doped silicon and demonstrate its benefits over classical doping approaches. To this end, silicon nanowires were initially provided with …
-
Thermal imaging and analysis of carbon nanotube composites
… contact resistance and heat loss to ambient. Transfer length method measurements were used to extract electrical contact resistance between the film and the electrodes. These methods were applied to investigate the properties of CNT films with several different morphologies, revealing that …
-
Device physics and device mechanics for flexible MoS2 thin film transistors
… multilayer MoS2 are investigated with Y-function method. By combining experiments and analysis, we show that the Y-function method offers a robust route for evaluating the low-field mobility, threshold voltage and contact resistance even when the contact is a Schottky-barrier as is common in …
-
Nickel Silicide as a Contact and Diffusion Barrier for Copper Metallization in Silicon Photovoltaics
… metallization on laboratory silicon solar cells. Transfer length method (TLM) measurements were used to examine the resistive nature of the contact. The scalability of the measurement itself was also examined. Characterization of the NiSi films for thickness, resistivity and composition were …
-
Enhancement of Ultrasonic Welding of Bulk Carbon Nanotube-Metallic and Graphene-Metallic Conductors
… fabricate stable and robust bonds but requires methods to further reduce electrical resistance and improve mechanical strength. The present dissertation has advanced ultrasonic welding between bulk CNT electrodes and Cu foil by utilizing chemically doped junctions at the bond interface. …
-
Optimisation of the electronic properties of graphene devices
… is its electronic properties. One interesting method available to explore this electronic system is to investigate how the material interacts with superconductors. This interaction has been investigated by several groups via the production of superconductor-graphene superconductor devices, …
-
Decreasing Graphene Contact Resistance by Increasing Edge Contact Length
… and metal can be improved by edge contact length. Edge contact length improves coupling between metal and graphene; therefore, contact resistance is reduced. Edge contact length can be introduced by generating nanostructures under metal. Fabrication of graphene based devices requires …
-
Chip- and System-Level Reliability on SiC-based Power Modules
… SiC substrates to form Ohmic contact. Circular transfer length method (CTLM) structures were fabricated to characterize contact resistivity. Ion implantation was designed and simulated by Sentraurus technology computer aided design (TCAD) software. Secondary-ion mass spectrometry (SIMS) results …
-
β-Gallium Oxide, β-Ga2O3, Based MOSFETs for kV-Class Power Electronics Applications
… Annealing is done for optimization purposes. Transfer Length Method (TLM) is used to extract sheet and contact resistances for comparison between different annealing techniques. Another device fabrication run is performed to showcase the effectiveness of vacuum annealing with a ten-fold …
-
Electrical and Thermal Characterisation of GaN-based Devices for RF and Power Electronics
… and field dependence of dynamic RON in the transfer length method (TLM) structures and in lateral Schottky barrier diodes grown on the identical epitaxy. The results indicate that the variation in dynamic RON is dominated by charge transport processes in GaN layers and not by …
-
Si ir Mg legiruotų GaN sluoksnių MOCVD auginimas ir charakterizavimas PIN diodų taikymams /
… n-GaN layers and characterized using the transfer length method (TLM). This study showed that Si doping in n-GaN could be effectively controlled by adjusting SiH4 flow rate and growth conditions. Electron concentrations ranging from 1017 to 1019 cm-3 were achieved, while the highest …
-
Lowering Contact Resistance of Boron-Doped Diamond using Pulsed Laser Annealing for Next-Generation Ultra-Wide Bandgap Semiconductor Devices
… Contact resistance was quantified using the transfer length method (TLM), where a series of contact pads (width: 204 µm) with spacings of approximately 3, 5, 8, 14, and 29 µm were fabricated. Different metal stacks, including titanium/gold (Ti/Au), platinum/gold (Pt/Au), and Ti/Pt/Au, were …
-
Electrical and Thermal Characterization of Wide Bandgap Semiconductor Devices: Buffer Behavior, Charge Transport, Trapping Effects and Future Devices
… layer. By using back biasing measurements on the transfer length method (TLM)<br/>structures, a time-dependent conduction mechanism was identified from an undulation in the<br/>reversed stepped superlattice (RSSL) layer. It is attributed to a localized trap-assisted vertically<br/>conduction …
-
Carbon based nanomaterials as transparent conductive electrodes
Optically transparent carbon based nanomaterials including graphene and carbon nanotubes(CNTs) are promising candidates as transparent conductive electrodes due to their high electrical conductivity coupled with high optical transparency, can be flexed several times with minimal deterioration in …