Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 90 for “"Transformation Induced Plasticity"”.
-
Transformation induced plasticity in ceramics
Transformation induced plasticity was investigated in a model ceramic. The effect upon toughness of the martensitic transformation from the cubic (paraelectric) to the tetragonal ( ferroelectric) phase in BaTiO3 was determined. The K1C fracture toughness, as measured by the hardness indentation …
-
Crystal Plasticity based Formability Analysis of Transformation Induced Plasticity Steels
… model to aid the development and utilization of transformation induced plasticity (TRIP) assisted multiphase steels in the automotive industry for light weighting applications. Automakers rely on accurate characterization and prediction of sheet metal formability to implement these materials into …
-
Microstructure Design of Low Alloy Transformation-Induced Plasticity Assisted Steels
The microstructure of low alloy Transformation Induced Plasticity (TRIP) assisted steels has been systematically varied through the combination of computational and experimental methodologies in order to enhance the mechanical performance and to fulfill the requirement of the next generation …
-
Stress Corrosion Cracking of a Transformation Induced Plasticity Fe39Mn20CO20Cr15Si5Al1 High Entropy Alloy
… Fe39Mn20Co20Cr15Si5Al1 (at. %) HEA exhibits transformation-induced plasticity (TRIP) behavior and shows the transformation from γ (face-centered cubic) to ɛ (hexagonal closed pack) phase. The TRIP Fe39Mn20Co20Cr15Si5Al1 (at. %) HEA consists of two phases: the ɛ – martensite phase (hexagonal …
-
Microstructural effects on the stability of retained austenite in transformation induced plasticity steels
Transformation Induced Plasticity (TRIP) steels have both high strength and high ductility. Retained austenite in the microstructure, upon straining, transforms to martensite and this absorbs energy and improves the work hardening of the steel, giving improved elongation. The transformation can be …
-
The numerical modelling of transformation induced plasticity in the deep drawing of stainless steel
… the effect of the martensite formation on the plasticity of the steel. The model was developed from existing work as a modified von Mises isotropic hardening elastic-plastic algorithm. The algorithm was implemented as the subroutine UMAT in the finite element program ABAQUS. Finite element …
-
Charpy Impact Testing of Twinning Induced Plasticity and Transformation Induced Plasticity High Entropy Alloys
… wear resistance. Even more recently, twinning induced plasticity (TWIP) and transformation induced plasticity (TRIP) non-equiatomic high entropy alloys have been engineered, promising increased strength and ductility as compared to their equiatomic counterparts. However, impact and fracture …
-
Σχέση μικροδομής-ιδιοτήτων σε χάλυβες TRIP (Transformation Induced Plasticity) αυξημένης πλαστικότητας κατά την παραμόρφωση
The requirements of the automobile industry for weight reduction and increase formability contributed to the development of TRIP steels, a class of steels combining a good balance of strength and ductility and a high energy absorption potential. These excellent properties are due to a fine complex …
-
Finite Strain Constitutive Modeling of Shape Memory Alloys Incorporating Transformation-Induced Plasticity under Cyclic Loading
… loading require SMAs experiencing repeated phase transformations, during which permanent deformations are developed due to transformation-induced plasticity (TRIP) at an effective stress level much lower than the material yielding point. Moreover, realistic applications also need SMA-based …
-
Microstructure and Mechanical Properties of a Dual Phase Transformation Induced Plasticity Fe-Mn-Co-Cr High Entropy Alloy
… property correlation in a newly developed transformation-induced plasticity dual-phase high entropy alloy (DP-HEA) Fe50Mn30Co10Cr10, microstructural analysis, mechanical testing, and fractography were performed on the DP-HEA. The microstructural state of the alloy was analyzed by optical …
-
A New Crystal Plasticity Model for Steels Exhibiting Transformation Induced Plasticity with Application to Quenched and Partitioned Steel
… required to accurately model steels that exhibit transformation induced plasticity over a wide range of strain-rates and temperatures. A novel thermodynamically consistent rate-dependent crystal plasticity formulation incorporating stress-induced transformation is first developed from the existing …
-
Microstructural Evolution and Mechanical Properties of a Medium Manganese Transformation Induced Plasticity Third Generation Advanced High Strength Steel
… mechanical properties of a prototype medium Mn TRansformation- and TWinning-Induced Plasticity (TRIP/TWIP) 3G-AHSS with a composition of 0.15C-6Mn-1Si-1Al. Heat treatments consisting of intercritical annealing and overageing stages compatible with the continuous galvanizing process were …
-
The Effect of Phase Morphology and Volume Fraction of Retained Austenite on the Formability of Transformation Induced Plasticity Steels
Transformation induced plasticity (TRIP) steels are a class of steels with exceptional formability properties, due mainly to the presence of meta-stable retained austenite which transforms to martensite under loading, locally hardening the steel. The volume fraction and mechanical stability of the …
-
Prediction and observation of transformation induced plasticity behavior in CoCrNi multi-principal element alloys with in-situ synchrotron x-ray diffraction
… the effects of strain rate on the activation of transformation- and twinning-induced plasticity, or TRIP and TWIP, respectively, are required. This work examines a CALPHAD based approach to identifying TRIP capable alloys using the diffusionless transformation temperature, denoted as T0. The …
-
<em>Effects of Temperature and Grain Size on the Transformation and the Deformation Behaviors of the TRIP (Transformation Induced Plasticity) Steels</em>
… the effects of temperature and grain size on the transformation and mechanical behaviors. 304L SS was used to investigate the effects of temperature ranging from 300K to 77K, while the Fe-10%Cr-5%Ni-8%Mn steel was used for the investigation of the effects of the grain size at 300K.</p> <p>At 203K, …
-
Finite element analysis of residual stress generation during spot welding and its affect on fatigue behavior of spot welded joints
… strength steels, namely dual phase DP600 GI and transformation induced plasticity TRIP600 steels were investigated for their fatigue life, microstructure changes and fatigue fracture mechanisms to develop design data for possible application in future light weight and more fuel efficiency …
-
Compositional Effects on the Mechanical Properties and Deformation Mechanisms of Face-Centered Cubic High-Entropy Alloys
… in highly concentrated alloys and twinning and transformation induced plasticity. It furthers the understanding of the mechanical properties of concentrated alloys and their deformation mechanisms.</p>
-
Modelagem constitutiva da fadiga em ligas com memória de forma
… a continuum damage perspective. Classical plasticity and transformation induced plasticity are incorporated into the model to allow the description of the main aspects of the thermomechanical behavior of SMAs. An equivalent critical damage is proposed to define the fatigue life of SMAs, …
-
Dynamic Deformation and Shear Localization in Friction-Stir Processed Al0.3CoCrFeNi and Fe50Mn30Co10Cr10 High-Entropy Alloys
… work hardening mechanisms known as twinning induced plasticity (TWIP) and transformation induced plasticity (TRIP) have been found active in Al0.3CoCrFeNi (molar fraction) and Fe50Mn30Co10Cr10 (at %) HEA compositions. Friction-stir processing was done to increase the mechanical properties and …
Page 1 of 5