Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 34 for “"Transformation strain"”.
-
The transformation strain dependence on applied stress in equiatomic nickel-titanium alloys of powder metallurgical origin
<p>The strain-temperature behavior of Ni-Ti samples upon martensitic phase transformation was investigated as a function of applied uniaxial tensile and compressive stresses. The samples were fabricated from stock bars of powder metallurgical origin;The samples were cycled in temperature when they …
-
A STUDY TO EVALUATE NON-UNIFORM PHASE MAPS IN SHAPE MEMORY ALLOYS USING FINITE ELEMENT METHOD
… large deformations without undergoing plastic transformations, makes them a good choice for actuators. This work studies their application in the aerospace and defense industries where SMA components can serve as release mechanisms for gates of enclosures that have to be deployed remotely. This …
-
Microstructure and Superelastic Response of Iron-Based Shape Memory Alloys
… superelastic behavior with up to 5% recoverable strain over a wide temperature range from -196°C to 240°C. The objective of this work is to investigate the effects of martensite variants, aging heat treatment, crystal orientations and grain size on the superelastic properties. Although the …
-
Finite Element Analysis Investigating the Sliding Contact of a Shape Memory Alloy Substrate
… alloy material parameters (maximum recoverable transformation strain, the inherent difference between the elastic moduli of martensite and austenite phase, various isothermal loading paths) and coefficients of friction are conducted to study the effects on the sliding response. It is shown that …
-
The Effect of Crystallographic Orientation and Thermo-mechanical Loading Conditions on the Phase Transformation Characteristics of Ferromagnetic Shape Memory Alloys
… in critical stress levels for the martensitic transformation with and without magnetic field, was determined as a function of crystallographic orientation, heat treatment and temperature parameters. Magnetostress of [111] crystals was observed to be much higher than that of [001] crystals with …
-
Effect of Aging Heat Treatments on Ni52Ti48 Shape Memory Alloy
… (SMAs) are capable of attaining a wide range of transformation temperatures depending on the heat treatment conditions and superior thermo-mechanical cycling stability, which are desired for repeated solid-state actuation. High Ni-content Ni-rich SMAs have very low transformation temperatures in …
-
The effect of stress on the transformation in nickel-titanium
<p>The shape of memory phase transformation in Ni-Ti was studied using tubes and wires of near equiatomic composition. The emphasis was on the effect of stress as produced by an applied uniaxial tensile stress and as a result of prior transformation fatigue cycling, TFC (cycling through the …
-
Constitutive modeling and numerical studies of pseudoelastic shape memory alloys
… of these applications. In this thesis, a transformation strain gradient enhancement is introduced into a phenomenological constitutive model for the pseudoelastic behavior of shape memory alloys. The constitutive model is able to capture several unique features of the constitutive response …
-
Investigation Of Thermal, Elastic And Load-biased Transformation Strains In Niti Shape Memory Alloys
… loads when heated through a solid-solid phase transformation from a lower-symmetry B19' martensite phase to a higher-symmetry B2 austenite phase. The strain associated with a shape memory alloy in an actuator application typically has thermal, elastic and inelastic contributions. The objective …
-
Hydrides in zirconium: microstructure and micromechanics
… The volume expansion in the zirconium to hydride transformation makes it more complicated. In order to further clarify the mechanism of hydride-induced degradation of zirconium (usually embrittlement), this project was proposed to deep investigate the microstructure and micromechanics of hydrides …
-
Modeling of Shape Memory Alloys Considering Rate-independent and Rate-dependent Irrecoverable Strains
… functions are properly chosen. The simultaneous transformation-plastic model considers rate-independent irrecoverable strain generation and uses isotropic and kinematic plastic hardening to capture the interactions between irrecoverable plastic strain and recoverable transformation strain. The …
-
On the thermomechanics of localizing pseudoelastic transformations in NiTi materials and structures
… NiTi alloys undergo reversible solid-state transformations around room temperature, which are activated by the application of stress or by modest temperature changes. The forward transformation causes about 6% strain and the release of about 12 kJ/kg of latent heat; both are recovered during …
-
Degradation of Phase Transforming SMA in Presence of a Corrosive Environment and Thermomechanical Loads
… This capability has roots in the martensitic transformation, a solid-to-solid, diffusion-less phase transformation between austenite and martensite. Studying the failure mechanisms in SMAs is rather challenging because of the effect of phase transformation/detwinning and the inherent …
-
A Gradient-based Constitutive Model to Predict Size Effects in the Response of Shape Memory Alloys
… increased hardening in their compressive stress-strain response as their diameter approached micron and submicron scales. This response cannot be modeled using conventional theories that lack an intrinsic length scale in their constitutive models. Constitutive models, however, are crucial for the …
-
Constitutive modeling and finite element analysis of the dynamic behavior of shape memory alloys
… is developed to simulate the localized phase transformations in NiTi wires during both loading and unloading. In this model, it is assumed that the untransformed particles located close to the transformed regions are less stable than those further away from the transformed regions. By …
-
Shape memory response of ni2mnga and nimncoin magnetic shape memory alloys under compression
… stressassisted magnetic field induced phase transformation (MFIPT) in the I X-phase transformation because of a large magnetostress of 7 MPa and small stress hysteresis. The X-phase is a recently discovered phase that is mechanically induced, however, the crystal structure is unknown. To …
-
Multi-Source Optimization Framework for Materials Discovery in Multi-Component NiTi Shape Memory Alloys
… discovery of NiTi-based alloys with targeted transformation behavior. First, an interpretable boosting-based model (CatBoost) is developed for predicting transformation temperatures (Ms, Mf, As, and Af). Using features derived from both composition and processing parameters, the model achieves …
-
Influence of microstructure on the shape memory properties of two Ti-lean, Ni-Ti-Pt high temperature shape memory alloys
… (work output, strength, ductility, recoverable strain, etc.) it is the base system of choice for development of derivative high-temperature shape memory alloys (HTSMAs). Ternary additions of Hf, Zr, Pt, Pd, and Au can be made, in quantities greater than [approximate] 10 at.%, to increase the …
-
The Role of Texture on the Stability of Layered Materials
… using molecular dynamics simulations. The phase transformation, mechanical failure, and thermal conductivity in these materials are explored. Exploring the kinetics of the phase transformation from graphene to diamane reveals that the transformation stress is significantly influenced by the …
-
Thermodynamic modeling of martensitic transformations in shape memory alloys.
… (SMAs) are due to solid-to-solid martensitic transformations (MTs) which correspond to a lattice level instability of the crystal structure. Currently, there exists a shortage of material models that can capture the details of lattice level MTs occurring in SMAs. In the first part of this …
Page 1 of 2