Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 55 for “"Transient Liquid Phase"”.

  1. Process Kinetics of Transient Liquid Phase

    … the isothermal solidification process during transient liquid phase sintering (TLPS) in binary isomorphous systems such as Ni-Cu, and the resulting uncertainty regarding the solidification mechanism and its sensitivity to important process parameters, has been investigated. A unique …

    waterloo Repository record for Process Kinetics of Transient Liquid Phase (opens in a new tab)

  2. Transient Liquid Phase Bonding for High Temperature Interconnects

    Transient liquid phase bonding (TLPB) is a type of interdiffusion bonding between metals that has been proposed for a variety of electronic interconnect applications. TLPB has been studied as an alternative to other high temperature interconnect materials such as high-Pb solders. The goal of …

    purdue-thes Repository record for Transient Liquid Phase Bonding for High Temperature Interconnects (opens in a new tab)

  3. Transient liquid phase bonding of dissimilar single crystal superalloys

    Transient liquid phase (TLP) bonding has proven to be the preferred method for joining extremely difficult-to-weld advanced materials, including similar and dissimilar superalloys. In this work, an approach that combines experiments and theoretical simulations are used to investigate the effect of …

    manitoba Repository record for Transient liquid phase bonding of dissimilar single crystal superalloys (opens in a new tab)

  4. Numerical simulation of transient liquid phase bonding under temperature gradient

    Transient Liquid Phase bonding under Temperature Gradient (TG-TLP bonding) is a relatively new process of TLP diffusion bonding family for joining difficult-to-weld aerospace materials. Earlier studies have suggested that in contrast to the conventional TLP bonding process, liquid state diffusion …

    manitoba Repository record for Numerical simulation of transient liquid phase bonding under temperature gradient (opens in a new tab)

  5. Transient Liquid Phase Sintering and Joining of Lanthanum Calcium Ferrite

    … with high temperatures and pressures. A novel transient liquid phase (TLP) method has been applied to sintering and joining La1-xCaxFeO3. The sintering behavior of cold pressed pellets with compositions La0.9Ca0.lFeO3 and La0.75Ca0.25FeO3 was studied using an isothermal method at temperatures …

    boise Repository record for Transient Liquid Phase Sintering and Joining of Lanthanum Calcium Ferrite (opens in a new tab)

  6. Transient liquid phase bonding of aerospace single crystal Rene-N5 superalloy

    … single crystal weld to solidification cracking, transient liquid phase (TLP) bonding has been developed as an attractive alternative method for the repair of these single crystal superalloys. In this research, the effect of process parameters on the joint microstructure of TLP bonded single …

    manitoba Repository record for Transient liquid phase bonding of aerospace single crystal Rene-N5 superalloy (opens in a new tab)

  7. Transient Liquid Phase Bonding of Titanium-, Iron- and Nickel- Based Alloys

    … and knife-line attack. On the other hand, transient liquid phase (TLP) bonding method has been considered as preferred joining method for those types of alloys. During the initial phase of the current work commercially pure Ti, Fe and Ni were diffusion bonded using commercially available …

    nodak Repository record for Transient Liquid Phase Bonding of Titanium-, Iron- and Nickel- Based Alloys (opens in a new tab)

  8. Engineered Interfaces for Enhanced Transient Liquid Phase Bonding in Electronics Assembly

    … the knowledge and applicability of copper-tin transient liquid phase bonding technology by accelerating, simplifying and enhancing the process. Transient liquid phase bonding is a diffusion-based technology, highly dependent on length for processing speed. In electronics, thin bond lines lead …

    arkansas Repository record for Engineered Interfaces for Enhanced Transient Liquid Phase Bonding in Electronics Assembly (opens in a new tab)

  9. Transient Liquid Phase bonding in the nickel base superalloy CM 247 LC

    … on the microstructure and properties of Transient Liquid Phase bonds in the directionally solidified superalloy CM 247 LC with a commercial braze filler material MBF-80 (Ni-Cr-B-C). Specimens were bonded at 1070°C, 1125°C and 1170°C for durations of 15 minutes, 1 hour and 4 hours. The …

    ubc Repository record for Transient Liquid Phase bonding in the nickel base superalloy CM 247 LC (opens in a new tab) Download PDF for Transient Liquid Phase bonding in the nickel base superalloy CM 247 LC (opens in a new tab)

  10. Quantifying Isothermal Solidification Kinetics during Transient Liquid Phase Bonding using Differential Scanning Calorimetry

    … isothermal solidification kinetics during transient liquid phase (TLP) bonding in binary and ternary systems; and resulting uncertainty in the accuracy of analytical and numerical models has been addressed by the development of a new technique using differential scanning calorimetry (DSC). …

    waterloo Repository record for Quantifying Isothermal Solidification Kinetics during Transient Liquid Phase Bonding using Differential Scanning Calorimetry (opens in a new tab)

  11. Experimental and theoretical investigations of transient liquid phase bonding of nickel based materials

    … of process parameters on the microstructure of transient liquid phase (TLP) joint. The theoretical investigations were carried out using analytical and numerical models to simulate base metal dissolution and isothermal solidification stages of the TLP bonding process. The experimental …

    manitoba Repository record for Experimental and theoretical investigations of transient liquid phase bonding of nickel based materials (opens in a new tab)

  12. Numerical Simulation and Experimental Study of Transient Liquid Phase Bonding of Single Crystal Superalloys

    … cause of prolonged processing time during transient liquid phase bonding of difficult-to-bond single crystal Ni-base materials, and use the acquired knowledge to develop an effective way to reduce the isothermal solidification time without sacrificing the single crystalline nature of the …

    manitoba Repository record for Numerical Simulation and Experimental Study of Transient Liquid Phase Bonding of Single Crystal Superalloys (opens in a new tab)

  13. ASSESSMENT OF PROPERTIES OF TRANSIENT LIQUID PHASE SINTERED (TLPS) INTERCONNECTS BY SIMULATION AND EXPERIMENTS

    … of conventional electronic packaging solutions. Transient Liquid Phase Sintering (TLPS) is a promising high temperature, high strength, low cost interconnect technology solution. TLPS is a liquid-assisted sintering process during which a low melting temperature constituent melts, surrounds, and …

    maryland Repository record for ASSESSMENT OF PROPERTIES OF TRANSIENT LIQUID PHASE SINTERED (TLPS) INTERCONNECTS BY SIMULATION AND EXPERIMENTS (opens in a new tab)

  14. Joining Polycrystalline Cubic Boron Nitride and Tungsten Carbide by Partial Transient Liquid Phase Bonding

    … FSW tools to be economically viable. Partial transient liquid phase (PTLP) bonding, a process used to join ceramics with thin metallic interlayers, was proposed as a method to permanently bond PCBN to WC. PTLP bonding is often performed using three layers of pure elements. On heating, the two …

    byu Repository record for Joining Polycrystalline Cubic Boron Nitride and Tungsten Carbide by Partial Transient Liquid Phase Bonding (opens in a new tab) Download PDF for Joining Polycrystalline Cubic Boron Nitride and Tungsten Carbide by Partial Transient Liquid Phase Bonding (opens in a new tab)

  15. Transient liquid phase bonding of nickel superalloys and stainless steels : modeling and experimental investigations

    … the isothermal solidification times during the Transient Liquid Phase (TLP) Bonding of nickel superalloys, Inconel 718 and 625, and stainless steels, 410 and 321, with nickel based filler alloy, BNi-2. Unlike conventional modeling, the diffusion of solute atoms was modeled by the Random Walk …

    concordia Download PDF for Transient liquid phase bonding of nickel superalloys and stainless steels : modeling and experimental investigations (opens in a new tab)

Page 1 of 3